Abstract:Sustainability concerns in the electrochemical charge storage realm revitalized research on the electrochemical capacitors (ECs), or synonymously, supercapacitors (SCs), because of the renewability of their electrode materials and environmental benignity thereby, longer life cycle to improve materials circularity, and their inherent superior rate charging/discharging than batteries. As SCs store energy via the reversible adsorption of electrolyte ions on the electrode pores, maximizing the number of pores to accommodate the ions is the most desired way to improve the charge storability. In this regard, we report herewith a simple and facile approach for engineering the porosity of commercial activated carbon by refluxing it in nitric acid as a function of time; the BET surface area of the 72 h refluxed samples increased by 75 %. Charge storage properties of the modified electrodes are evaluated in a three-electrode system configuration in 1 M Na 2 SO 4 electrolyte; a 75 % increase in the surface area led to an increase in specific capacitance over 110 % following a significant reduction in Warburg impedance. Besides, symmetric SC full cells were fabricated by varying the electrode mass between 3 and 14 mg·cm −2 in five steps. All the fabricated devices achieved a potential window of 1.8 V in 1 M Na 2 SO 4 . The highest mass loaded (∼14 mg·cm −2 ) device fabricated using the prepared material has delivered a maximum capacitance of ∼990 mF, the maximum areal capacitance of ∼494 mF·cm −2 , an energy density of ∼13 mWh·cm −3 , and a maximum power density of ∼2189 mW·cm −3 . The device also maintained ∼97 % retention in capacitance with a remarkable coulombic efficiency of ∼97 % after 5000 cycles. The performance of the device is comparable with the commercial SCs used for low voltage DC hold-up applications such as embedded microprocessor systems. The procedure developed herewith supports easy recycling and reusing of the activation agent, and thereby reduces the release of toxic chemicals into the environment.

A Facile Approach to Improve Electrochemical Capacitance of Carbons by in Situ Electrochemical Oxidation.

Controlled electrochemical oxidation for enhancing the capacitance of carbon nanotube composites

Facile Construction Of Highly Redox Active Carbons With Regular Micropores And Rod-Like Morphology Towards High-Energy Supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Mesoporous Carbon Materials As Electrodes for Electrochemical Double-Layer Capacitor

A universal strategy to obtain highly redox-active porous carbons for efficient energy storage

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Surface Oxidation Modification and Performance of Activated Carbon Electrode Material

A high-performance supercapacitor based on activated carbon fibers with an optimized pore structure and oxygen-containing functional groups

What Structural Features Make Porous Carbons Work for Redox-Enhanced Electrochemical Capacitors? A Fundamental Investigation

Facile Preparation of Porous Carbons Derived from Orange Peel Via Basic Copper Carbonate Activation for Supercapacitors

A novel two-prong strategy to boost the capacitive performance of commercial carbon cloth

Tailoring the charge storability of commercial activated carbon through surface treatment

Oxygen Groups Immobilized On Micropores For Enhancing The Pseudocapacitance

Self-activation of Cellulose: A New Preparation Methodology for Activated Carbon Electrodes in Electrochemical Capacitors

Carbon Materials for Chemical Capacitive Energy Storage

Free-standing carbon network with enhanced capacitive performance synthesized via green H 2 O 2 activation

Nanoarchitectonics of fulvic acid based oxygen-rich hierarchical porous carbon with high specific surface area as supercapacitor electrodes

Electrochemical Introduction of Active Sites into Super-long Carbon Nanotubes for Enhanced Capacitance

Thermally oxidized activated carbon with high specific surface area to boost electrochemical performance for supercapacitor

Vaporized Hydrothermal Functionalization of Carbon Fiber and Its Superior Supercapacitor Performance