Abstract:Mode division multiplexing on chips can enhance optical interconnect capacity tremendously, avoiding expensive wavelength division multiplexing technology. It is a critical functionality to switch or process different mode channels together for future optical network-on-chip based on mode division multiplexing. However, controlling different modes simultaneously in the traditional wide multimode waveguide is very difficult due to very different optical properties of the modes. Here, we introduce a novel concept to realize compact multimode 3 dB couplers, which can process multiple modes of a densely-packed waveguide array bus waveguide simultaneously. A dual-mode 3 dB coupler with two input and two output bus waveguides, each of which supports two transverse electrical modes, is designed with simulated insertion losses of less than 0.23 dB and crosstalks of similar to-18.1 dB for both modes at the central wavelength. The relative phases at the two outputs are 90 degrees for both modes theoretically. The designed device has a short coupling length of 21 mu m with SiO2 cladding. The fabricated one demonstrates insertion losses of similar to 0.3 dB and similar to 0.5 dB and crosstalks of -19.6 dB and -14.1 dB for the two modes, respectively. A triple-mode 2 x 2 3 dB coupler, consisting of six coupled waveguides in the coupling region of 87 mu m length, shows average insertion losses and crosstalks for all three modes of similar to 0.25 dB and similar to-14 dB, respectively. The present design method is also extended to 3 dB couplers for more modes theoretically.

Broadband Mode Multiplexer Formed with Non-Planar Tapered Directional Couplers

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Broadband Five-Mode (de)multiplexer with Horizontal Tapered Directional Couplers

Design of an Ultra-Broadband Silicon Mode (De)multiplexer

Ultra-broadband and low-modal-crosstalk mode multiplexer based on cascaded vertical directional couplers formed by adiabatic-tapered waveguides without mode conversion

Ultra-Broadband Mode Multiplexer with Cascaded Adiabatic Vertical Directional Couplers

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

Broadband Nine-Channel Mode-Division (de)multiplexer Based on Densely Packed Multimode Waveguide Arrays

Experimental Demonstration of a Broadband Two-Mode Multi/demultiplexer Based on Asymmetric Y-junctions

Mode Multi/demultiplexer Based on Cascaded Asymmetric Y-junctions

Broadband Mode Multiplexer/Demultiplexer Based On Tapered Multi-Core Fiber

Design and Fabrication of Broadband Polymer Mode (de)multiplexer Using a Direct Inscribing Method

Horizontal Directional Coupler Formed with Waveguides of Different Heights for Mode-Division Multiplexing

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Silicon Mode (de)multiplexer Based on Cascaded Particle-Swarm-Optimized Counter-Tapered Couplers

Mode Multiplexers With Tapers Based On Shortcuts To Adiabaticity

Design and Fabrication of Three-Dimensional Polymer Mode Multiplexer Based on Asymmetric Waveguide Couplers

Mode Couplers and Converters Based on Dual-Core Hollow-Core Photonic Bandgap Fiber

Ultra-compact and High-Performance Silicon Mode (de)multiplexer Based on a Tapered Bent Asymmetric Directional Coupler

Multimode 3 Db Coupler Based on Symmetrically Coupled Waveguides for On-Chipbrk Mode Division Multiplexing