Abstract:Numerous attempts have been made to develop ion-exchange membranes with low resistance for various applications such as electrodialysig and fuel cells. In this study, the strategies of immersion precipitation and dry-casting were combined, to control the membrane porosity with the purpose of improving the physical and electrochemical properties of ion-exchange membranes. The porosity was tuned using the time of membrane exposure to an elevated temperature environment. In addition to controlling the porosity to balance the membrane electrical resistance with the diffusion caused by the concentration gradient, it was experimentally shown that the porosity can influence the IEC and water uptake of the membrane and, thus, further affect the resistance. Furthermore, the surface hydrophilicity was characterized by water contact angle measurements; the results revealed that the porous membranes were more hydrophilic than the dense membranes. As demonstrated by experimental data for desalination by electrodialysis, it was found that a membrane dried at 60 degrees C for 1 h had the highest desalination efficiency. This is mainly because porous membranes facilitate the transport of ions. Compared to membranes with higher porosity, the membrane prepared with a 1-h aging time had more steric hindrance, which can decrease the diffusion of ions, so that a superior desalination efficiency can be obtained. To further investigate the impact of the density of -SO32- functional groups on the electrodialysis process, membranes with various weight ratios of poly(ether sulfone) (PES) to sulfonated poly(ether sulfone) (SPES) were prepared. With increasing content of SPES, the physical and electrochemical properties of the newly developed porous membranes were changed. A membrane with higher density of functional groups was found to have a higher desalination efficiency, because of the electrostatic effect of the membrane. These results were consistent with the current efficiency. Under optimal membrane preparation conditions, the obtained membrane had a high IEC (1.75 mmol/g) and water uptake (168%). The desalination efficiency reached 95%, and the current efficiency reached 100%. It was concluded that the performance of a porous membrane with controllable porosity can enhance the electrodialysis (ED) process with respect to energy efficiency and desalination efficiency. New methods of fabricating membranes with pores such as immersion precipitation and dry-casting are thought to be potential routes to decreasing the electrical resistance.

Developing Homogeneous Ion Exchange Membranes Derived from Sulfonated Polyethersulfone/n-Phthaloyl-chitosan for Improved Hydrophilic and Controllable Porosity

Fabrication of a Cation-Exchange Membrane Via the Blending of SPES/N-Phthaloyl Chitosan/MIL-101(Fe) Using Response Surface Methodology for Desalination

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Novel Composite Anion Exchange Membranes Based on Quaternized Polyepichlorohydrin for Electromembrane Application

Synthesis of Cation Exchange Membranes Based on Sulfonated Polyether Sulfone with Different Sulfonation Degrees

Preparation of novel semihomogeneous cation-permeable membranes from blends of sulfonated poly(phenylene sulfide) and sulfonated phenolphthalein poly(ether ether ketone)

A Novel Porous Asymmetric Cation Exchange Membrane with Thin Selective Layer for Efficient Electrodialysis Desalination

Preparation and Properties of Blend Anion Exchange Membranes Derived from Quaternary Ammonium Poly(aryl ether sulfone)s

Cation-Exchange Membranes with Controlled Porosity in Electrodialysis Application

A Facile Approach to Fabricate Composite Anion Exchange Membranes with Enhanced Ionic Conductivity and Dimensional Stability for Electrodialysis

Novel Low-Cost Cation Exchange Membrane Containing Hydrophilic Cross-Linked Structure for Enhanced Electrodialysis Properties

Preparing Alkaline Anion Exchange Membrane with Enhanced Hydroxide Conductivity Via Blending Imidazolium-Functionalized and Sulfonated Poly(Ether Ether Ketone)

Fabrication of Hydrophilic Cation Exchange Membrane with Improved Stability for Electrodialysis: an Excellent Anti-Scaling Performance

Enhanced Water Retention and Low-Humidity Proton Conductivity of Sulfonated Poly(Ether Ether Ketone) Hybrid Membrane by Incorporating Ellipsoidal Microcapsules

Preparation of novel heterogeneous cation-permeable membranes from blends of sulfonated poly(phenylene sulfide) and poly(ether sulfone)

Homogeneous blend membrane made from poly(ether sulphone) and poly(vinylpyrrolidone) and its application to water electrolysis

Construction of Ion Transport Channels in Cation Exchange Membranes by Embedding MXene with Dual Regulation Strategy for Electrodialysis

Preparation and Electrochemical Characterization of Organic-Inorganic Hybrid Poly(Vinylidene Fluoride)-SiO 2 Cation-Exchange Membranes by the Sol-Gel Method Using 3-Mercapto-Propyl-Triethoxyl-Silane.

Preparation of Anion Exchange Membrane by Efficient Functionalization of Polysulfone for Electrodialysis

Enhancing Hydroxide Conductivity and Stability of Anion Exchange Membrane by Blending Quaternary Ammonium Functionalized Polymers

Preparation and Properties of Sulfonated Poly(phthalazinone ether ketone) Membranes for Electrodialysis