Abstract:Numerous attempts have been made to develop ion-exchange membranes with low resistance for various applications such as electrodialysig and fuel cells. In this study, the strategies of immersion precipitation and dry-casting were combined, to control the membrane porosity with the purpose of improving the physical and electrochemical properties of ion-exchange membranes. The porosity was tuned using the time of membrane exposure to an elevated temperature environment. In addition to controlling the porosity to balance the membrane electrical resistance with the diffusion caused by the concentration gradient, it was experimentally shown that the porosity can influence the IEC and water uptake of the membrane and, thus, further affect the resistance. Furthermore, the surface hydrophilicity was characterized by water contact angle measurements; the results revealed that the porous membranes were more hydrophilic than the dense membranes. As demonstrated by experimental data for desalination by electrodialysis, it was found that a membrane dried at 60 degrees C for 1 h had the highest desalination efficiency. This is mainly because porous membranes facilitate the transport of ions. Compared to membranes with higher porosity, the membrane prepared with a 1-h aging time had more steric hindrance, which can decrease the diffusion of ions, so that a superior desalination efficiency can be obtained. To further investigate the impact of the density of -SO32- functional groups on the electrodialysis process, membranes with various weight ratios of poly(ether sulfone) (PES) to sulfonated poly(ether sulfone) (SPES) were prepared. With increasing content of SPES, the physical and electrochemical properties of the newly developed porous membranes were changed. A membrane with higher density of functional groups was found to have a higher desalination efficiency, because of the electrostatic effect of the membrane. These results were consistent with the current efficiency. Under optimal membrane preparation conditions, the obtained membrane had a high IEC (1.75 mmol/g) and water uptake (168%). The desalination efficiency reached 95%, and the current efficiency reached 100%. It was concluded that the performance of a porous membrane with controllable porosity can enhance the electrodialysis (ED) process with respect to energy efficiency and desalination efficiency. New methods of fabricating membranes with pores such as immersion precipitation and dry-casting are thought to be potential routes to decreasing the electrical resistance.

Construction of Ion Transport Channels in Cation Exchange Membranes by Embedding MXene with Dual Regulation Strategy for Electrodialysis

Fabrication of a Cation-Exchange Membrane Via the Blending of SPES/N-Phthaloyl Chitosan/MIL-101(Fe) Using Response Surface Methodology for Desalination

Two-dimensional MXene membranes with biomimetic sub-nanochannels for enhanced cation sieving

MXene Composite Membranes with Enhanced Ion Transport and Regulated Ion Selectivity

A Novel Porous Asymmetric Cation Exchange Membrane with Thin Selective Layer for Efficient Electrodialysis Desalination

All-MXene-Based Integrated Membrane Electrode Constructed Using Ti3C2Tx As an Intercalating Agent for High-Performance Desalination.

A Facile Approach to Fabricate Composite Anion Exchange Membranes with Enhanced Ionic Conductivity and Dimensional Stability for Electrodialysis

Ion Exchange Membranes: Constructing and Tuning Ion Transport Channels

Preparation and characterization of Ti3C2TX MXene/PVDF cation exchange membrane for electrodialysis

Composite Ion-Exchange Membranes with High Specific Ion Selectivity for Efficient Electro-Membrane Processes

Developing Homogeneous Ion Exchange Membranes Derived from Sulfonated Polyethersulfone/n-Phthaloyl-chitosan for Improved Hydrophilic and Controllable Porosity

Cation-Exchange Membranes with Controlled Porosity in Electrodialysis Application

The Preparation of High-Performance and Stable MXene Nanofiltration Membranes with MXene Embedded in the Organic Phase

Mussel-inspired Modification of Ion Exchange Membrane for Monovalent Separation

Mxenes As Inorganic Fillers for the Construction of Poly(aryl Piperidinium) Anion Exchange Membranes with Microphase Separation Structures to Enhance Ionic Conductivity

Enhanced Monovalent Selectivity of Cation Exchange Membranes Via Adjustable Charge Density on Functional Layers

Molten Salt Intercalated MXene Membrane for D-Spacing Stabilization under Electrochemical Assistance

Advancing electrodialysis with dually cross-linked PVDF-based anion exchange membranes having semi-interpenetrating networks

Revolutionary MOF-enhanced anion exchange membrane for precise monovalent anion separation through structural optimization and doping

Design of pendent imidazolium side chain with flexible ether-containing spacer for alkaline anion exchange membrane

Influence of the ions distribution of anion-exchange membranes on electrodialysis