Abstract:We present a novel hydrolysis-hydrothermal approach to using lithium residues on the surface of LiNi0.5Co0.2Mn0.3O2 as raw materials to synthesize ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 cathode materials, for the first time. High-resolution transmission electron microscopy (HRTEM) and fast Fourier transform (FFT) analysis indicate that the spherical particles of LiNi0.5Co0.2Mn0.3O2 are completely coated by crystalline LiAlO2 with an average thickness of 4 nm; cross-section SEM and corresponding EDS results confirm that partial Al3+ ions are doped into the bulk LiNi0.5Co0.2Mn0.3O2 with gradient distribution. Electrochemical tests show that the modified materials exhibit excellent reversible capacity, enhanced cyclability and rate properties, combining with higher Li ion diffusion coefficient and better differential capacity profiles compared with those of the pristine material. Particularly, the 2 mol% LiAlO2-inlaid sample maintains 202 mA h g(-1) with 91% capacity retention after 100 high-voltage cycles (with 4.6 V charge cut-off) at 1 C. The enhanced electrochemical performance can be ascribed to the removal of lithium residues and the unique LiAlO2-inlaid architecture. The removal of lithium residues are believed to decrease side reactions between Li2O and the electrolyte, while the unique LiAlO2-inlaid architecture can buffer the volume change of core and shell during cycles, enhance the composite's lithium ion diffusion ability and inherit the advantages of LiAlO2 coating and doping.

Direct Synthesis of Al2O3-modified Li(Ni0.5Co0.2Mn0.3)O2 Cathode Materials for Lithium Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Enhanced electrochemical properties of Li1·2Ni0·13Co0·13Mn0·54O2 coated with Al2O3 nano-film

Modification research of LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 as a cathode material for lithium-ion battery

Enhanced Electrochemical and Structural Stability of Ni‐rich Cathode Material by Lithium Metaborate Coating for Lithium‐Ion Batteries

Synthesis of Spherical LiNi0.8Co0.15Al0.05O2 Cathode Materials for Lithium-Ion Batteries by a Co-Oxidation-controlled Crystallization Method

Surface Modification of Li(Ni0.6Co0.2Mn0.2)O2 Cathode Materials by Nano-Al2O3 to Improve Electrochemical Performance in Lithium-Ion Batteries

Microwave-assisted Synthesis and Co, Al Co-modification of Ni-rich LiNi0.8Mn0.2O2 Materials for Li-ion Battery Electrode

Li[Li0.20Ni0.128Co0.136Mn0.536]O2 Cathode Material for Lithium-Ion Batteries

Enhanced high-temperature cycling stability of LiNi1/3Co1/3Mn1/3O2-coated LiMn2O4 as cathode material for lithium ion batteries

Synthesis and electrochemical properties of Li[Li0.2Mn0.54 Ni0.13-Co0.13]O2 as cathode material for Li-ion batteries

Modification of LiNi0.5Co0.2Mn0.3O2 Cathode Material Using Nano TiO2 to Enhance the Cycle Stability in High-Voltage Ranges

High-voltage Electrochemical Performance of LiNi0.5Co0.2Mn0.3O2 Cathode Materials Via Al Concentration Gradient Modification

Enhanced low voltage cycling stability of LiMn2O4 cathode by ZnO coating for lithium ion batteries

Enhanced Electrochemical Performance in LiNi0.8Co0.15Al0.05O2 Cathode Material: Resulting from Mn-surface-modification Using a Facile Oxidizing–coating Method

Synthesis and Electrochemical Performance of Al2O3 Coated LiNi0.03Co0.05Mn1.92O4 as Cathode Material

A hydrolysis-hydrothermal route for the synthesis of ultrathin LiAlO2-inlaid LiNi0.5Co0.2Mn0.3O2 as a high-performance cathode material for lithium ion batteries

Towards high-performance cathode materials for lithium-ion batteries: Al 2 O 3 -coated LiNi 0.8 Co 0.15 Zn 0.05 O 2

Improved Cycling Stability of Cobalt-free Li-rich Oxides with a Stable Interface by Dual Doping

Synthesis and Electrochemical Properties of LiNi0.8Co0.15Al0.05O2 Prepared from the Precursor Ni0.8Co0.15Al0.05OOH

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries