Abstract:Using integral carbon felt as reinforced perform, large-scale C/C composites were prepared by thermal gradient-chemical vapor infiltration (TG-CVI) with two temperature controlling ways, namely keeping constant temperature of the inner wall or outer wall of the samples. The results indicated that, for keeping constant temperature of the outer wall, the composite density was merely 0.64 g/cm(3), showing high-low-high distribution across the wall. Meanwhile, its structure comprised rough laminar and smooth laminar. For keeping constant temperature of the inner wall, the density of the sample showed evenly distribution across the wall and increased to 0.98 g/cm(3), and densification efficiency was 73.79%, higher than that of the former. Under this temperature controlling way, the composite comprised only rough laminar carbon with superior properties. Compared to the outer wall temperature controlling, the composite prepared by the inner wall temperature controlling, needed higher temperature and more appropriate temperature gradient during densification, which was consistent well with the ideal densification model. Moreover, the inner wall temperature controlling way enabled the large-scale C/C composite densification from inner side to outside wall, and achieved uniform density distribution, high densification efficiency and excellent microstructure.

A Numerical Study of Densification Behavior of Silicon Carbide Matrix Composites in Isothermal Chemical Vapor Infiltration

Numerical Simulation of Isothermal Chemical Vapor Infiltration Process for Fabrication of C/Sic Composites

A Two-Process Model for Study of the Effect of Fiber Preform Structure on Isothermal Chemical Vapor Infiltration of Silicon Carbide Matrix Composites

Numerical simulation of effects of reactor dimensions on isothermal CVI process of C/SiC composites

Numerical simulation for fabrication of C/SiC composites in isothermal CVI reactor

A Two-Dimensional Model for Densification Behaviour of C/SiC Composites in Isothermal Chemical Vapour Infiltration

Numerical Simulation for ICVI Process of Si_3N_(4P)/Si_3N_4 Composites

Densification of unidirectional carbon–carbon composites by isothermal chemical vapor infiltration

Numerical Simulation of Effect of Methyltrichlorosilane Flux on Isothermal Chemical Vapor Infiltration Process of C/Sic Composites

Research Progress of Numerical Simulation of Chemical Vapor Infiltration Used to Prepare Composites

Numerical Simulation of Isothermal Chemical Vapor Infiltration Process in Fabrication of Carbon-Carbon Composites by Finite Element Method

Modeling for the Fabrication Process of a φ1185 mm C/C Composite Thermal Insulation Tube in an Isothermal Chemical Vapor Infiltration Reactor

Processing of C<i><sub>f</sub></i>/SiC Composites through Two-Channel Temperature-Control CVI: I, Modeling

Densification Process for Thermal Gradient CVI Fabricating C/C Composites Based on Numerical Simulation

Microstructure and Properties of Particle Reinforced Silicon Carbide and Silicon Nitride Ceramic Matrix Composites Prepared by Chemical Vapor Infiltration

Densification Behavior of Thermal Gradient Cvi of Large-Scale C/C Composites

Improved densification of SiC f /SiC composites by microwave-assisted chemical vapor infiltration process based on multifrequency solid-state sources excitation

Flow Field Simulation of Isothermal Chemical Vapor Infiltration for Manufacturing Carbon/Carbon Composites

Modeling of Forced Flow-thermal Gradient CVI: Effects of Control Parameters and Processing Schemes on a Densification

Carbon/silicon Carbide Composites Prepared by Chemical Vapor Infiltration Combined with Silicon Melt Infiltration

Comparative Modeling of Gas Transport in Isothermal Chemical Vapor Infiltration Process of C/SiC Composites