Abstract:The in-situ Sr isotope determination of solid samples has the advantages of high spatial resolution and convenient and rapid sample preparation. However, due to the lack of column chemistry separation of matrix elements from Sr, the interference correction (especially the isobaric interference from 87 Rb on 87 Sr) becomes a big issue for high precise in-situ Sr isotope analytical results. In this study, we evaluated the influence of isobaric interference systematically and adopted an improved strategy for isobaric interference correction of Rb. Specifically, as an external standard for data calibration, an in-house silicate standard (Rb-std) was fused from pure oxide powders. The new standard (Rb-std) shows very low contents of Sr (<1 ppm), Yb (<0.09 ppm) and Er (<0.05 ppm), which directly avoid the trouble of interference of doubly charged ions and isobar, when we determinate the mass fractionation factors of Rb ( β Rb ). Our improved method can provide more accurate data than previous researches, in which the mass fractionation were calculated from an external reference material StHs6/80-G with high Rb (30.07 ppm), Sr (482 ppm), Yb (1.13 ppm) and Er (1.18 ppm). Then, these β Rb from Rb-std were applied by linear interpolation to the unknown samples for correction of 87 Rb on 87 Sr. The analytical results of serial international reference materials (BIR-1G, BCR-2G, BHVO-2G, T1-G and ATHO-G) demonstrate that our improved method can raise the upper limit of Rb/Sr for in-situ Sr isotope determination and reduce the relative standard deviation of results. This improvement of the upper limit of Rb/Sr (<0.33) will expand not only range of microanalysis for silicate minerals, but also bulk Sr isotope determination of volcanic rock combining with rapid fusion technique.

Determination of Hf–Sr–Nd isotopic ratios by MC-ICP-MS using rapid acid digestion after flux-free fusion in geological materials

Flux-free fusion technique using a boron nitride vessel and rapid acid digestion for determination of trace elements by ICP-MS

Combined chemical separation of Lu, Hf, Rb, Sr, Sm and Nd from a single rock digest and precise and accurate isotope determinations of Lu–Hf, Rb–Sr and Sm–Nd isotope systems using Multi-Collector ICP-MS and TIMS

<i>In situ</i> Hf isotope analysis of cassiterite by LA-MC-ICP-MS: protocol and applications

A simplified instrumental protocol for trace Nd and Hf isotope measurements (<10 ng) using a MC-ICP-MS and an Apex Omega de-solvating system

Ce and Nd stable isotopes purification and determination of geological samples by MC-ICP-MS

Single reaction chamber microwave digestion coupled with ICP-MS for the determination of ultra-trace mercury in rocks

Simultaneous Determination of 50 Elements in Geological Samples by ICP-MS Combined with ICP-OES

Experience gained from the management of 9 cases of bilateral renal cell carcinoma.

Improved in-situ Determination of Sr Isotope Ratio in Silicate Samples Using LA-MC-ICP-MS and Its Wider Application for Fused Rock Powder

Determination Of Trace Rare Earth Elements In Soils By Inductively Coupled Plasma-Mass Spectrometry After Microwave Digestion For Sample Preparation

Determining high-precision Sr-Nd isotopic ratios of certified reference materials using Thermal Ionization Mass Spectrometry

Determination of Isotopic Ratio by Multi-collector Double-focusing Inductively Coupled Plasma Mass Spectrometry

A Rapid and Simple Method for Lithium Purification and Isotopic Analysis of Geological Reference Materials by MC-ICP-MS

High‐Precision Measurement of Stable Cr Isotopes in Geological Reference Materials by a Double‐Spike TIMS Method

Simultaneous Determination of 50 Elements in Geochemical Samples by Low-Pressure Closed Digestion-ICP-MS

Tetrafluoroboric Acid Digestion for Accurate Determination of Rare Earth Elements in Coal and Fly Ash by ICP-MS Analysis

Separation Of Hf From Rock Samples For Isotope Analysis By Mc-Icp-Ms Using Ion-Exchange Chromatography Method

Combined use of multiple external and internal standards in LA-ICP-MS analysis of bulk geological samples using lithium borate fused glass

A single-column and efficient procedure for separating Fe and Mg from geological materials for isotopic analyses using MC-ICP-MS

Characterisation of δ142Ce/140Ce Isotope Ratios in Geological Reference Materials using an SSB+Sm Doping and MC‐ICP‐MS Method