Abstract:Radioactive iodine isotopes especially 131 I are used for diagnosis and treatment of different types of cancer diseases. Due to the leak of radioactive iodine into the patient's urine in turn, the wastewater would be contaminated, so it is worth preparing a novel adsorption green material to remove the radioactive iodine from wastewater efficiently. The removal of 127 I and 131 I contaminants from aqueous solution is a problem of interest. Therefore, this work presents a new study for removing the stable iodine 127 I − and radioactive iodine 131 I from aqueous solutions by using the novel nano adsorbent (Nano ZnO/MWCNTs) which is synthesized by the arc discharge method. It is an economic method for treating contaminated water from undesired dissolved iodine isotopes. The optimal conditions for maximum removal are (5 mg/100 ml) as optimum dose with shacking (200 rpm) for contact time of (60 min), at (25 °C) in an acidic medium of (pH = 5). After the adsorption process, the solution is filtrated and the residual iodide ( 127 I − ) is measured at a maximum UV wavelength absorbance of 225 nm. The maximum adsorption capacity is (15.25 mg/g); therefore the prepared nano adsorbent (Nano ZnO/MWCNTs) is suitable for treating polluted water from low iodide concentrations. The adsorption mechanism of 127 I − on to the surface of (Nano ZnO/MWCNTs) is multilayer physical adsorption according to Freundlich isotherm model and obeys the Pseudo-first order kinetic model. According to Temkin isotherm model the adsorption is exothermic. The removal efficiency of Nano ZnO/MWCNTs for stable iodine ( 127 I − ) from aqueous solutions has reached 97.23%, 89.75%, and 64.78% in case of initial concentrations; 0.1843 ppm, 0.5014 ppm and 1.0331 ppm, respectively. For the prepared radio iodine ( 131 I − ) solution of radioactivity (20 μCi), the dose of nano adsorbent was (10 mg/100 ml) and the contact time was (60 min) at (pH = 5) with shacking (200 rpm) at (25 °C). The filtration process was done by using a syringe filter of a pore size (450 nm) after 2 days to equilibrate. The removal efficiency reached (34.16%) after the first cycle of treatment and the percentage of residual radio iodine was (65.86%). The removal efficiency reached (94.76%) after five cycles of treatment and the percentage of residual radio iodine was (5.24%). This last percentage was less than (42.15%) which produces due to the natural decay during 10 days.

Large-scale synthesis of nano Cu 2 O/Cu–C for iodide removal in a novel countercurrent two-stage adsorption and membrane separator system

Enhanced Removal of Iodide Ions by Nano Cu2O/Cu Modified Activated Carbon from Simulated Wastewater with Improved Countercurrent Two-Stage Adsorption

Efficient Adsorption of Radioactive Iodide Ion from Simulated Wastewater by Nano Cu 2 O/Cu Modified Activated Carbon

Fabrication of Magnetic Cu2O Nanocomposites for Enhanced Iodide Removal: Adsorption Properties, Mechanism and Application

Treatment of iodide from simulated radioactive wastewater using novel countercurrent two-stage adsorption process

Bimetal ZIFs-derived Cu0 embedded in nitrogen-doped carbon framework activation of molecular oxygen for efficient iodide elimination

Immobilization of In-Situ Formed Ni(OH)2 Nanoparticles in Chitosan Beads for Efficient Removal of U(VI) from Aqueous Solutions

Synthesis of Graphene Oxide Nanoribbons/chitosan Composite Membranes for the Removal of Uranium from Aqueous Solutions

Impact of (nano ZnO/multi-wall CNTs) prepared by arc discharge method on the removal efficiency of stable iodine 127I and radioactive iodine 131I from water

Hierarchically mesoporous mixed copper oxide/calcined layered double hydroxides composites for iodide high-efficiency elimination

Fast and efficient capture of iodide ions by silver-modified GO nanosheets: From adsorption to membrane filtration

Strategy to combine two functional components: Efficient nano material development for iodine immobilization

A chitosan film implanted with g-C3N4@Ag nanosheets and in-suit formed AgCl nanoparticles for efficient iodide removal

Safe disposal of radioactive iodide ions from solutions by Ag2O grafted sodium niobate nanofibers

MXene/AgNW composite material for selective and efficient removal of radioactive cesium and iodine from water

Removal of Radioactive Iodine Using Silver/Iron Oxide Composite Nanoadsorbents

Silver-decorated ZIF-8 derived ZnO concave nanocubes for efficient photooxidation-adsorption of iodide anions: An in-depth experimental and theoretical investigation

Simultaneous removal and separate recovery of radioactive Cs+ and I- ions from wastewater using a reusable bifunctional composite, Ni@Pt/K2NiFe(CN)6

Facile Preparation of MCM-41/Ag2O Nanomaterials with High Iodide-Removal Efficiency

Facile construction of a core-shell structured metal-organic frameworks nanofiber membrane for removing Co(II) from simulated radioactive wastewater

Cu/Al2O3 aerogels for high-efficiency and rapid iodide elimination from water