Abstract:Radioactive iodine isotopes especially 131 I are used for diagnosis and treatment of different types of cancer diseases. Due to the leak of radioactive iodine into the patient's urine in turn, the wastewater would be contaminated, so it is worth preparing a novel adsorption green material to remove the radioactive iodine from wastewater efficiently. The removal of 127 I and 131 I contaminants from aqueous solution is a problem of interest. Therefore, this work presents a new study for removing the stable iodine 127 I − and radioactive iodine 131 I from aqueous solutions by using the novel nano adsorbent (Nano ZnO/MWCNTs) which is synthesized by the arc discharge method. It is an economic method for treating contaminated water from undesired dissolved iodine isotopes. The optimal conditions for maximum removal are (5 mg/100 ml) as optimum dose with shacking (200 rpm) for contact time of (60 min), at (25 °C) in an acidic medium of (pH = 5). After the adsorption process, the solution is filtrated and the residual iodide ( 127 I − ) is measured at a maximum UV wavelength absorbance of 225 nm. The maximum adsorption capacity is (15.25 mg/g); therefore the prepared nano adsorbent (Nano ZnO/MWCNTs) is suitable for treating polluted water from low iodide concentrations. The adsorption mechanism of 127 I − on to the surface of (Nano ZnO/MWCNTs) is multilayer physical adsorption according to Freundlich isotherm model and obeys the Pseudo-first order kinetic model. According to Temkin isotherm model the adsorption is exothermic. The removal efficiency of Nano ZnO/MWCNTs for stable iodine ( 127 I − ) from aqueous solutions has reached 97.23%, 89.75%, and 64.78% in case of initial concentrations; 0.1843 ppm, 0.5014 ppm and 1.0331 ppm, respectively. For the prepared radio iodine ( 131 I − ) solution of radioactivity (20 μCi), the dose of nano adsorbent was (10 mg/100 ml) and the contact time was (60 min) at (pH = 5) with shacking (200 rpm) at (25 °C). The filtration process was done by using a syringe filter of a pore size (450 nm) after 2 days to equilibrate. The removal efficiency reached (34.16%) after the first cycle of treatment and the percentage of residual radio iodine was (65.86%). The removal efficiency reached (94.76%) after five cycles of treatment and the percentage of residual radio iodine was (5.24%). This last percentage was less than (42.15%) which produces due to the natural decay during 10 days.

A chitosan film implanted with g-C3N4@Ag nanosheets and in-suit formed AgCl nanoparticles for efficient iodide removal

Cross-linked Chitosan Microspheres Entrapping Silver Chloride Via the Improved Emulsion Technology for Iodide Ion Adsorption.

Cross-linked Chitosan Microspheres: an Efficient and Eco-Friendly Adsorbent for Iodide Removal from Waste Water.

Iodide ion-imprinted chitosan beads for highly selective adsorption for nuclear wastewater treatment applications

Hydrophobic-modified Montmorillonite Coating Onto Crosslinked Chitosan As the Core-Shell Micro-Sorbent for Iodide Adsorptive Removal Via Pickering Emulsion Polymerization

Safe disposal of radioactive iodide ions from solutions by Ag2O grafted sodium niobate nanofibers

Immobilization of In-Situ Formed Ni(OH)2 Nanoparticles in Chitosan Beads for Efficient Removal of U(VI) from Aqueous Solutions

Ultralight crystalline hybrid composite material for highly efficient sequestration of radioiodine

Chitosan/carbon Dots-Loaded Nanocellulose/layered Double Hydroxides Composite Hydrogel for Effective Detection and Removal of Iodide Ion

Capture of iodide from wastewater by effective adsorptive membrane synthesized from MIL-125-NH2 and cross-linked chitosan

Alginate-Based Ionic Polymer Composite Derived from Seaweeds for Efficient Iodine Capture

Facile Fabrication of Nanofibrillated Chitin/Ag2O Heterostructured Aerogels with High Iodine Capture Efficiency

MIL-88A(Al)/chitosan/graphene oxide composite aerogel with hierarchical porosity for enhanced radioactive iodine adsorption

Enhanced Removal of Iodide Ions by Nano Cu2O/Cu Modified Activated Carbon from Simulated Wastewater with Improved Countercurrent Two-Stage Adsorption

Efficient adsorption of radioactive iodine by covalent organic framework/chitosan aerogel

Bimetal ZIFs-derived Cu0 embedded in nitrogen-doped carbon framework activation of molecular oxygen for efficient iodide elimination

Impact of (nano ZnO/multi-wall CNTs) prepared by arc discharge method on the removal efficiency of stable iodine 127I and radioactive iodine 131I from water

Efficient Adsorption of Radioactive Iodide Ion from Simulated Wastewater by Nano Cu 2 O/Cu Modified Activated Carbon

Removal of Radioactive Iodine Using Silver/Iron Oxide Composite Nanoadsorbents

Highly Efficient Iodide Adsorption from Medical Radioactive Wastewater by Strong Alkaline Anion Exchange Fiber

Efficient Removal of Radioactive Iodine Anions Using Δ-Bi2o3/Mof-808 Through Photo-Oxidation and Adsorption: Performance Evaluation and Investigation of Synergistic Mechanisms