Graded Layer Identification and Open Voltage Adjustment for EDM Process of Ni-Al2O3 FGMs

Hongzheng Liu,Guanxin Chi,Zhenlong Wang,Yukui Wang,Huichao Li

DOI: https://doi.org/10.1007/s00170-018-2555-z

IF: 3.563

2018-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:Ni-Al2O3 functionally graded materials (FGMs) have become important for high-temperature applications due to a continuous change in graded layers. However, the manufacturing process of Ni-Al2O3 FGMs with the traditional pulse power is a long process because the pulse power cannot real-timely adjust machining parameters to adapt the change of graded layers. This paper designed a real-time monitoring module and a parameter adjustment module, which can identify different graded layers and actively adjust machining parameters to adapt the change of graded layers. By means of the monitoring module, four major discharge states, normal, arc, insufficiency, and long pulse discharge state have been discriminated real-timely. The 70% Ni/30%Al2O3 layer and 30% Ni/70%Al2O3 layer have been distinguished based on the quantitative analysis of insufficiency and long pulse discharge waveforms. Multi-layers of Ni-Al2O3 FGMs are machined to validate the machining performance of the parameter adjustment module. Experiment results demonstrate that by adjusting the open voltage, the machining efficiency of 30% Ni/70%Al2O3 layer has been increased by six times, resulting in more time-efficient EDM process of Ni-Al2O3 FGMs.