Abstract:In order to study the effect of oxygen impurities on corrosion behavior, the platform for supercritical carbon dioxide corrosion experiment was built. The effect of oxygen impurities on the corrosion characteristics of heat-resistant steel T91, 310S and Inconel 625 was studied in supercritical carbon dioxide environment with oxygen concentration of 10 -4 . The corrosion mass increase, phase composition of corrosion products, surface morphology and element distribution were analyzed by means of weighing, X-ray diffraction, scanning electron microscopy and energy dispersive spectrometer. Results show that the corrosion mass increase of T91, 310S and Inconel 625 in supercritical carbon dioxide environment containing oxygen impurities was 1.36, 1.55 and 3.19 times higher than that in high-purity carbon dioxide environment, respectively. In supercritical carbon dioxide environment containing oxygen impurities, the content of Fe 2 O 3 in T91 corrosion products increases, a large amount of vane-like Cr 2 O 3 appeares on 310S surface, and nodules on the surface of Inconel 625 disappear. Compared with the high-purity carbon dioxide environment, the mass fraction of carbon on the surface of the three materials has been greatly reduced to about 5% in supercritical carbon dioxide environment containing oxygen impurities. Besides, the corrosion mass increase curves of three materials obey the parabolic law, and the corrosion resistance of 310S and Inconel 625 is significantly better than that of T91.

Corrosion Behavior of Heat-Resistant Materials in High-Temperature Carbon Dioxide Environment

Corrosion Behavior and Mechanism of Heat-Resistant Steel T91 in High-Temperature Carbon Dioxide Environment

Study on Corrosion Characteristics of Heat-resistant Materials in Supercritical Carbon Dioxide Environment Containing Oxygen Impurities

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Corrosion and Carburization Behavior of Heat-Resistant Steels in a High-Temperature Supercritical Carbon Dioxide Environment

Corrosion Performance of Heat-Resisting Steels and Alloys in Supercritical Carbon Dioxide at 650 °C and 15 MPa

High-Temperature Corrosion Behaviors of Ni-Based Alloys in Carbon Dioxide

Molecular Dynamics, Thermodynamics and Experimental Studies on the Corrosion Mechanism of T92 and TP347H Steels in High-Pressure CO2 and H2O at 600 °C

Corrosion Behaviors of Heat-Resisting Alloys in High Temperature Carbon Dioxide

Corrosion behavior of T91 tubing in high temperature supercritical carbon dioxide environment

Corrosion Behavior of Titanium Alloy Ti6Al4V in Supercritical Carbon Dioxide at 600°C

Corrosion Behavior and Lifetime Prediction of VM12, Sanicro 25 and Inconel 617 in Supercritical Carbon Dioxide at 600 °C

Corrosion Behavior of X65 Steel in Carbon Dioxide Solution under High Temperature and High Pressure

Characteristics of the Corrosion Products on Three Scratched Heat-Resisting Alloys in Closed-Loop Supercritical and High-Temperature CO2

Thermodynamic Analysis of Typical Alloy Oxidation and Carburization in High-Temperature CO2 Atmosphere

Study on Mechanical Degradation of Ferrite/ Martensite and Austenitic Steels in High-Temperature Supercritical Carbon Dioxide Environment

Corrosion and Mechanical Performance of Grade 92 Ferritic-Martensitic Steel After Exposure to Supercritical Carbon Dioxide

High-Temperature Corrosion Behavior of T92, TP347HFG and IN625 with Surface Scratching in Carbon Dioxide at 600 °C

Studies on High Temperature Corrosion of Austenitic Heat‐Resistant Steels Super 304H/10Cr18Ni9Cu3NbN in Simulated and Real Combustion Gas Atmospheres

Corrosion behavior of heat-resistant steel T91 in high-temperature supercritical carbon dioxide with impurity O2, SO2 or H2S

Corrosion of Alloy Haynes 230 in High Temperature Supercritical Carbon Dioxide with Oxygen Impurity Additions