Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

Microscale Finite Element Analysis for Predicting Effects of Air Voids on Mechanical Properties of Single Fiber Bundle in Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Out-of-plane Tensile Failure Behavior of Fiber Reinforced Composites Due to Lay-Up Temperature Induced Intra-Ply and Inter-Ply Voids

Study on Void Formation in Multi-Layer Woven Fabrics

Multiscale simulation and theoretical prediction for the elastic properties of unidirectional fiber‐reinforced polymer containing random void defects

Research on Piezoresistive Effect and Random Model of Carbon Fiber Bundle

A Comparative Study of Void Characteristics on the Mechanical Response of Unidirectional Composites

Peridynamic Meso-scale Modeling for Degradation in Transverse Mechanical Properties of Composites with Micro-void Defects

Effect of Random Void Defects on the Mechanical Behavior of C/C Braided Composites

Effect Mechanism and Simulation of Voids on Hygrothermal Performances of Composites

Hierarchical Multi-Scale Analysis of the Effect of Varying Fiber Bundle Geometric Properties on the Mechanical Properties of 3D Braided Composites

A unified trans-scale mechanical properties prediction method of 3D composites with void defects

On micromechanics approach to stiffness and strength of unidirectional composites

Effect of Manufacturing Defects on Mechanical Properties and Failure Features of 3D Orthogonal Woven C/C Composites

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Micro-mesoscopic Prediction of Void Defect in 3D Braided Composites

3D Orthogonal Woven Carbon/Carbon Composites: Micromechanical Modeling and Damage Analysis

Multiscale Analysis of Mechanical Properties of 3D Orthogonal Woven Composites with Randomly Distributed Voids

Bottom-up stochastic multiscale model for the mechanical behavior of multidirectional composite laminates with microvoids

Tensile Performance Prediction of CFRPs with Voids Using Multiscale Analysis and Neural Networks