Abstract:The mechanical properties of unidirectional fiber-reinforced plastic (UD-FRP) are affected by a variety of micro-defects, such as random fiber arrangement, fiber misalignment and micro-voids. This study aims to investigate how these multiple micro-defects interact with each other and how they affect the strength and failure mechanism of UD-FRP by means of computational micromechanics. The composite behavior was simulated by the finite element analysis of a representative volume element of the composite microstructure in which the random distribution of fibers, the micro-voids, and the fiber misalignment are explicitly included. Both matrix and interface failure were considered for the loadings of transverse tension/compression, longitudinal compression, transverse/longitudinal shear, and their combination. It was found that these three micro-defects significantly weakened the compressive strength of UD-FRP along the longitudinal direction. Especially, the fiber misalignment magnified the effect of fiber arrangement, while the micro-voids reduce the effect. Besides, the fiber arrangement and micro-voids significantly weakened the tensile and compressive strength of UD-FRP along the transverse direction, but their interaction effect was not obvious. Moreover, transverse and longitudinal shear strength are significantly affected by micro-voids, but only longitudinal shear is affected by geometric fiber arrangement, and this effect is also weakened by micro-voids. Finally, the damage envelope under the combined longitudinal compression and transverse loads was obtained and compared with the Tsai-Wu failure criterion. The results showed that the Tsai-Wu criteria can provide an effective estimation for the failure locus under this biaxial loading condition.

Peridynamic Meso-scale Modeling for Degradation in Transverse Mechanical Properties of Composites with Micro-void Defects

Progressive failure analysis of 2D woven composites at the meso-micro scale

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Peridynamic Micromechanical Model for Damage Mechanisms in Composites

Micro-CT Based Meso-Scale Modeling and Peridynamics Analysis for Short-Fiber Composites

The Influence of Void Distribution on Transverse Mechanical Properties of Unidirectional Composites

Out-of-plane Tensile Failure Behavior of Fiber Reinforced Composites Due to Lay-Up Temperature Induced Intra-Ply and Inter-Ply Voids

Microstructures Failure Analysis of Fiber Reinforced Composites with Various Void Types

Transverse Strength Prediction of Composite Materials Via Micromechanics Model

Influence of irregular-void on transverse tensile mechanical properties of composites

Bottom-up stochastic multiscale model for the mechanical behavior of multidirectional composite laminates with microvoids

Meso-Scale Modeling for Effective Properties in Continuous Fiber-Reinforced Composites by State-Based Peridynamics

Study of the effect of void defects on the mechanical properties of fiber reinforced composites

Evaluation of Mechanical Behaviour of Unidirectional Fibre-Reinforced Composites Considering the Void Morphology

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

A Comparative Study of Void Characteristics on the Mechanical Response of Unidirectional Composites

Microscopic Failure Mechanisms of Fiber-Reinforced Polymer Composites under Transverse Tension and Compression

Evaluation of Piezoelectric and Mechanical Properties of the Piezoelectric Composites with Local Damages

Peridynamics-based model of composite lamina with progressive variations in mechanical properties

Micro/meso-scale Damage Analysis of a 2.5D Woven Composite Including Fiber Undulation and In-Situ Effect

An Innovative Micromechanics-Based Multiscale Damage Model of 3D Woven Composites Incorporating Probabilistic Fiber Strength Distribution