Abstract:The Ce–Ga and Ga–Gd systems are critically assessed by means of the calculation of phase diagram (CALPHAD) technique. The excess Gibbs energy of the solution phases [liquid, orthorhombic (Ga), fcc (Ce), bcc (Ce or Gd), and hcp (Gd)] is modeled with the Redlich–Kister equation. In the Ce–Ga and Ga–Gd systems, the intermetallic compounds, CeGa, Ce3Ga2, Ce3Ga, α-CeGa6, β-CeGa6, GaGd, Ga6Gd, Ga2Gd3, and Ga3Gd5 are treated as stoichiometric compounds. The intermetallic compounds CeGa2 and Ga2Gd with a homogeneity range, are treated using a two-sublattice model as the formula (Ce,Ga)0.333333(Ce,Ga)0.666667, and (Ga,Gd)0.666667(Ga,Gd)0.333333, respectively. In the Ce–Ga system, there are nine invariant reactions, and five stoichiometric intermetallic compounds and the compound CeGa2 with a homogeneity domain ranging from about 66.67 to 77.94 at.% Ga. Some improvements are obtained based on the experimental data in the present work, the liquidus line is more close to the most experimental points, and the homogeneity range of the compound CeGa2 seems more reasonable at full temperature range. In the Ga–Gd system, there are eight invariant reactions, and four stoichiometric intermetallic compounds and the compound Ga2Gd with a homogeneity domain ranging from about 19.64 to 33.33 at.% Gd. The present phase diagram and thermodynamic properties of the system are well reproduced with the experimental data.

A stepwise thermodynamic modeling of the phase diagram for the Cu–Be system

Structure and Thermodynamic Properties of Beo: Empirical Corrections in the Quasiharmonic Approximation

Ab Initio Calculation of Lattice Dynamics and Thermodynamic Properties of Beryllium

Phase Equilibria of the Cu-in System II: Thermodynamic Assessment and Calculation of Phase Diagram

Critical assessment of Co-Cu phase diagram from first-principles calculations

Thermodynamic Descriptions of the Cu–Zn System

Thermodynamic Modeling of the Bi-Se and Bi-Te Binary Systems

Thermodynamic Description of the Cu–Sn System

The Cu–Te system: Phase relations determination and thermodynamic assessment

First-principles calculations, experimental study, and thermodynamic modeling of the Al-Co-Cr system

Phase diagram, thermodynamic modeling and predictions of glass-forming range and ability in the Co–Cu–Zr system

First Principles Modeling of the Temperature Dependent Ternary Phase Diagram for the Cu-Pd-S System

Thermodynamic Reassessment of the Binary Cu-Sn, Cu-P, and Sn-P and Ternary Cu-Sn-P Systems

A new approach to establish both stable and metastable phase equilibria for fcc ordered/disordered phase transition: application to the Al–Ni and Ni–Si systems

Thermodynamic Description of the Ce–Ga and Ga–Gd Systems

Thermodynamic Calculation of Phase Equilibria in the C-Mo-Zr System

Order–Disorder Model of Phase Transition in AxB1−x Binary Systems of F.C.C. Structure

Crystal structure, thermodynamics, magnetics and disorder properties of Be-Fe-Al intermetallics

Phase Equilibria of Sn–Sb–Cu System

Metastable Phase Formation in the Immiscible Cu–Co System Studied by Thermodynamic, Molecular Dynamics Andab Initiocalculations Together with Ion Beam Mixing

Effective first-principle description of thermodynamics for BCC Nb-V system by involving the contributions of chemical order, lattice distortion and vibration