Abstract:Due to the various structural and functional characteristics of lightweight, energy absorption and sound/heat insulation et al, metallic foam materials have been increasingly developed in recent years, especially for the most widely used alloy foams. In this work, the Al‐Mg‐Si alloy foams with a porosity of 60% were prepared by a powder metallurgy technology, in which the carbamide was used as the space‐holder material. The effect of solution treatment on the microstructure, compressive property and energy absorption response of the as‐prepared Al‐Mg‐Si alloy foams was studied. The results show that when the solution temperature (T) is increased from 25 to 555 ℃, the room‐temperature compressive strength of the Al‐Mg‐Si alloy foams increases from 11.2 to 26.7 MPa, but decreases when T is more than 555 ℃. The strengthening mechanisms of solution treatment mainly lie in that the dislocation movement between the grain boundaries can be effectively blocked by the precipitated phases. Regarding to the high‐temperature compressive property of the Al‐Mg‐Si alloy foams that solution‐treated at 555 ℃, the compressive strength is found decrease from 28.7 to 12.3 MPa when the compression temperature is elevated up to 250 ℃. Correspondingly, the energy absorption decreases from 17.02 to 9.14 MJ/m3. Compared to the pure Al foam, the high‐temperature softening effect for the Al‐Mg‐Si alloy foams is more remarkable, which ascribes to the formation of microcracks in the alloy matrix. The current research provides us a cost‐effective and easy‐handle approach to enhance the compressive strength and energy absorption ability of the metallic foam materials.This article is protected by copyright. All rights reserved.

Mechanical behaviors and energy absorption properties of Y/Cr and Ce/Cr coated open-cell nickel-based alloy foams

Preparation and Oxidation Performance of Y and Ce-Modified Cr Coating on open-cell Ni-Cr-Fe Alloy Foam by the Pack Cementation

Effects of Rare Earth Modified Cr Coating on Structure and Oxidation Resistance of Open-cell Ni-Cr-Fe Alloy Foam

Compressive Property and Energy Absorption Characteristic of 3D Open-Cell Ni–Cr–Fe Alloy Foams under Quasi-Static Conditions

Synthesis and mechanical properties of open-cell Ni-Fe-Cr foams

Synthesis and Properties of Open-Cell Ni–Cr–Fe–Al Alloy Foams by Pack Co-Deposition Process

A Dual-Layer Ce–Cr/Al Oxidation Resistant Coating for 3D Open-Cell Nickel Based Foams by a Two-Step Pack Cementation

Microstructure, Oxidation Resistance and High-Temperature Strength of a New Class of 3D Open‐cell Nickel-Based Foams

Effect of the Solid Phase Diffusion on the Mechanical Properties of Open-Cell Fe-Ni Alloy Foams

The effects of ceria on the mechanical properties and thermal shock resistance of thermal sprayed NiAl intermetallic coatings

Improved energy absorption capacity of Al/Al 2 O 3 foams by the ductile/brittle hybrid deformation mode

Effect of Heat Treatment on the Microstructure, Compressive Property, and Energy Absorption Response of the Al–Mg–Si Alloy Foams

Microstructural characteristics of Ce conversion coatings on Cf/Al composite or Ni-P plated Cf/Al composite

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

Study of Oxidation-Resistant NiCrAl–Al Coatings Co-Deposited by Electrophoresis on Nickel Foams

Enhancement of the Mechanical Strength of Aluminum Foams by SiC Nanoparticles

Influence of vacuum annealing temperature on damping performance of NiCrAlY composite coatings

Microstructures and Mechanical Properties of Al2O3/YAG:Ce3+ Eutectics with Different Ce3+ Concentrations Grown by HDS Method

Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Study on Microstructure and Oxidation Resistance Mechanism of Y-modified NiCrAlY Coating Prepared by Pack Cementation