Abstract:Gear system is characterized by high efficiency, compact structure, and transmission ratio stability, and it has been extensively applied in various industrial equipment. This paper presents a novel preliminary estimate method for gear reducer noise radiation and vibration characteristics, and systematic researches on radiation characteristics of gear reducer are made. In the noise analysis process, the influence of time-varying mesh stiffness, error excitation, and tooth flank contact feature are comprehensively considered, the linear vibration model and nonlinear vibro-impact model for transmission system is set up, and then the dynamic load of the gearbox is obtained by solving the model. The dynamic load of bearing is taken as an excitation, the finite element method/boundary element method is adopted to analyze vibration and noise radiation characteristics of the gear reducer. The time domain response and field point noise spectrum at sound field are obtained, and the influence of harmonic components in excitation on vibration noise radiation of gearbox are discussed. The dynamic characteristics and sound radiation characteristics of gear reducer under different operating conditions are calculated, the change pattern of frequency component of the bearing dynamic load and noise radiation based on operating condition are obtained, and some interesting conclusions are observed from research that the gearbox produce the linear vibration and noise under the heavy load condition. Meanwhile, the nonlinear vibro-impact and noise is appeared under light load condition. The distribution of the gearbox radiated nose is uniform in various conditions, but noise takes sub-harmonic components as fundamental frequency and more peaks in the noise spectrum are observed. With the increase of the rotary speed, the noise tallies with the trend described by Kato formula except that under the gear system resonance speed. The impact force between teeth flanks shall be on the increase with the increase of rotary speed, and gear pair vibration experiencing a course from irregular vibration to regular periodic rattle vibration. With the increase of load, the noise of reducer changes with load as the variation of logarithmic function. For the noise in the process with load on the increase from no-load (the load is 0), the gear reducer vibration condition experienced both sides collision, single-side collision, and normal meshing in three stages. The radiated nose is increased gradually, but the abrupt change happened in critical positions between both sides collision and single-side collision as well as single-side collision and normal meshing in the process. The conclusions of this paper will offer theoretical basis for reducer to reduce vibration and noise.

Reliability Analysis of Filtering Reducers Considering Temperature Correction and Shock Load of Space

A review of technologies of temperature-adjustable heat sink

Research on Performance Test System of Space Harmonic Reducer in High Vacuum and Low Temperature Environment

Discrete Reliability Analysis Method for Multistage Centrifugal Pump Transmission Structure Based on Sparse Grid Model

Analysis and experimental study on vibration characteristics of the RV reducer

Calculation and Analysis on Return Difference of Filtering Gear Reducer based on Probability Theory

Research on Transmission Accuracy Characteristic Analysis of RV Reducer

Analysis and simulation of the influence of initial liquid level on lubricating flow state and oil-churning resistance moment of planetary reducer

Analysis of mixed lubrication of RV reducer turning arm roller bearing

Return error simulation analysis and experimental study for RV reducer with ADAMS

A Study on Torsional Stiffness of RV Reducer Considering Variable Loads and Tooth Modification

Optimization of high-speed reducer in electric vehicle based on analysis of lubrication

Analysis of the degradation in transmission accuracy of RV reducers considering the wear clearance between cycloidal wheels and pinwheels

Vibration and noise characteristics of a gear reducer under different operation conditions

A reliability evaluation method for RV reducer by combining multi-fidelity model and Bayesian updating technology

Non-circular Interference Fit Analysis in Harmonic Reducer Based on Sequential Assembling and Loading Simulation

An Optimization Method for the Contact Slip Length of Space Electromagnetic Relay Based on Uniform Experimental Design

Dynamic Modeling and Analysis of an RV Reducer Considering Tooth Profile Modifications and Errors

Analysis of Digital Filters Used in Time-Series Small Heat Flux Measurement

Optimization and Experimental Research on a New-Type Short Cylindrical Cup-Shaped Harmonic Reducer

Development and Research Status of RV Reducer