Abstract:Numerical simulations are performed to investigate the effects of ambient density (<math>ρam</math>) and nozzle diameter (<math>Dnoz</math>) on the ignition characteristic of diesel spray combustion under engine-like conditions. A total of nine cases which consist of different <math>ρam</math> of 14.8, 30.0, and 58.5 kg/m3 and different <math>Dnoz</math> of 100, 180, and 363 <math>μ</math>m are considered. The results show that the predicted ignition delay times are in good agreement with measurements. The current results show that the mixture at the spray central region becomes more fuel-rich as <math>Dnoz</math> increases. This leads to a shift in the high-temperature ignition location from the spray tip towards the spray periphery as <math>Dnoz</math> increases at <math>ρam</math> of 14.8 kg/m3. At higher <math>ρam</math> of 30.0 and 58.5 kg/m3, the ignition locations for all <math>Dnoz</math> cases occur at the spray periphery due to shorter ignition timing and the overly fuel-rich spray central region. The numerical results show that the first ignition location during the high-temperature ignition occurs at the fuel-rich region at <math>ρam⩽30.0</math> kg/m3 across different <math>Dnoz</math>. At <math>ρam=58.5</math> kg/m3, the ignition occurs at the fuel-lean region for the 100 and 180 <math>μ</math>m cases, but at the fuel-rich region for the 363 <math>μ</math>m nozzle case. This distinctive difference in the result at 58.5 kg/m3 is likely due to the relatively longer ignition delay time in the 363 <math>μ</math>m nozzle case. Furthermore, the longer ignition delay time as <math>Dnoz</math> increases can be related to the higher local scalar dissipation rate in the large nozzle case.

Effects of Combustion Chamber and Nozzle on Homogeneous Mixture Formation

Numerical Simulation on Quasi-Homogeneous Mixture Formation in Diesel Engines

Experimental Study on the Effects of Mixture Homogeneity on Stratified-Charge Compression Ignition Combustion

Effects of Injection Strategy on Soot Formation in GDI Engines

Study on Ultramultihole Nozzle Fuel Injection and Diesel Combustion

Numerical Investigation on Combustion Performance Optimization with Strut/Wall Combined-Staged Injection Strategy Within an Axisymmetric Variable Geometry Combustor at Mach 3

Effect of inhomogeneous methane-air mixtures on combustion characteristics in a constant volume combustion chamber

Nonuniform Mixture Formation by a Two-Stage Gasoline Direct Injection Combustion System

Understanding Interaction Between Reactive Jets in Pre-Chamber Ignition of Gaseous Fuel

Effects of Nozzle Hole Number and Distribution on Interaction between Flash Boiling Spray and Ambient Gas of Gasoline Direct-injection Injector

Effect of Swirling Direction on Premixed Multi-Nozzle Combustion

Effects of Staged Injection on Supersonic Mixing and Combustion

Three-Dimensional Numerical Simulation of Spray, Mixed Gas Formation and Combustion Process for Gasoline Direct Injection Engine

Influence of coaxial fuel–air jets on mixing performance of extruded nozzle at supersonic combustion chamber: Numerical study

Research on the ignition mechanism and structural optimization of turbulent jet pre-chamber in GDI engines

Numerical Investigation on NH 3 /H 2 /Air Combustion Flow in a Multiple Direct-Injection Combustor

3D Numerical Simulation of Spray and Combustion Process for In-cylinder DI Gasoline Engine

Numerical study on the effect of multiple injection strategies on ignition processes for low-temperature diesel spray

Effects of ambient pressure and nozzle diameter on ignition characteristics in diesel spray combustion

Effects of the Nozzle Design Parameters on Turbulent Jet Development of Active Pre-Chamber

Effect of Group-Hole Nozzle to Diesel Combustion and Engine Performance