Abstract:Na3.5C6O6 is proposed as an air‐stable high‐efficiency additive for Na compensation. Its structure and electrochemical desodiation path is clarified. It delivers a high capacity of 385 mAh g−1. Its decomposition product C6O6 dissolves in the electrolyte without damaging the performance of the cells. Its introduction significantly improves the lifespan of the full cell. These prove its feasibility as an cathode additive. Sodium‐ion battery (SIB) is a candidate for the stationary energy storage systems because of the low cost and high abundance of sodium. However, the energy density and lifespan of SIBs suffer severely from the irreversible consumption of the Na‐ions for the formation of the solid electrolyte interphase (SEI) layer and other side reactions on the electrodes. Here, Na3.5C6O6 is proposed as an air‐stable high‐efficiency sacrificial additive in the cathode to compensate for the lost sodium. It is characteristic of low desodiation (oxidation) potential (3.4–3.6 V vs. Na+/Na) and high irreversible desodiation capacity (theoretically 378 mAh g−1). The feasibility of using Na3.5C6O6 as a sodium compensation additive is verified with the improved electrochemical performances of a Na2/3Ni1/3Mn1/3Ti1/3O2ǀǀhard carbon cells and cells using other cathode materials. In addition, the structure of Na3.5C6O6 and its desodiation path are also clarified on the basis of comprehensive physical characterizations and the density functional theory (DFT) calculations. This additive decomposes completely to supply abundant Na ions during the initial charge without leaving any electrochemically inert species in the cathode. Its decomposition product C6O6 enters the carbonate electrolyte without bringing any detectable negative effects. These findings open a new avenue for elevating the energy density and/or prolonging the lifetime of the high‐energy‐density secondary batteries.

Sodium compensation and interface protection effects of Na3PS3O for sodium-ion batteries with P2-type oxide cathodes

Building a Stable Plateau-Type Na2Ti3O7 Anode Interface Toward Advanced Sodium-Ion Batteries

Sodium Formate as a Highly Efficient Sodium Compensation Additive for Sodium-Ion Batteries with a P2-Type Layered Oxide Cathode

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

Air‐Stable Na3.5C6O6 as a Sodium Compensation Additive in Cathode of Na‐Ion Batteries

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries

Realizing Complete Solid-Solution Reaction in High Sodium Content P2-Type Cathode for High-Performance Sodium-Ion Batteries

A Novel Pentanary Metal Oxide Cathode with P2/O3 Biphasic Structure for High‐Performance Sodium‐Ion Batteries

Achieving High-Capacity Cathode Presodiation Agent Via Triggering Anionic Oxidation Activity in Sodium Oxide

Mitigating the Large‐Volume Phase Transition of P2‐Type Cathodes by Synergetic Effect of Multiple Ions for Improved Sodium‐Ion Batteries

High‐Efficiency Cathode Sodium Compensation for Sodium‐Ion Batteries

A Novel P2/O3 Composite Cathode Toward Synergistic Electrochemical Optimization for Sodium Ion Batteries

Suppressing the P2‐O2 phase transition and Na+/vacancy ordering in Na0.67Ni0.33Mn0.67O2 by a delicate multicomponent modulation strategy

Mitigating the P2–O2 phase transition of high-voltage P2-Na2/3[Ni1/3Mn2/3]O2 cathodes by cobalt gradient substitution for high-rate sodium-ion batteries

NASICON-Type NaTi2(PO4)3 Surface Modified O3-Type NaNi0.3Fe0.2Mn0.5O2 for High-Performance Cathode Material for Sodium-Ion Batteries.

Integrating P2 into O′3 Toward a Robust Mn-Based Layered Cathode for Sodium-Ion Batteries

Dual‐strategy modification on P2‐Na0.67Ni0.33Mn0.67O2 realizes stable high‐voltage cathode and high energy density full cell for sodium‐ion batteries

Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode

Insights on Electrochemical Behaviors of Sodium Peroxide as a Sacrificial Cathode Additive for Boosting Energy Density of Na-Ion Battery

Na+-Conductive Na2Ti3O7-Modified P2-type Na2/3Ni1/3Mn2/3O2 Via a Smart in Situ Coating Approach: Suppressing Na+/Vacancy Ordering and P2-O2 Phase Transition

Functional surface modification of P2-type layered Mn-based oxide cathode by thin layer of NASICON for sodium-ion batteries