Abstract:This study presents an adaptive algorithm for distance relays. In this algorithm, the network connected to the transmission line terminals are modelled using an equivalent circuit, and the impedances of this equivalent circuit are estimated. By employing this algorithm, relay errors (over/under reach) caused by changes in network structure, the presence of fault resistance, and injected current from the remote end of the transmission line are eliminated. As a result, the relay accurately determines fault location and fault resistance, enhancing the performance of its Zone1 and Zone2 functions. Faults in power systems occur for various reasons, such as aging or natural disasters. Detecting, locating, and promptly clearing these faults is crucial for maintaining the safety and reliability of transmission lines (TLs). Distance relays (DRs), which protect TLs, detect faults, estimate their location, and send the required commands. However, these relays may experience mis‐detection due to manipulated impedance arising from both internal and external factors. These factors include measurement device errors, network topology changes, the presence of fault resistance (FR), and injected currents from remote line terminals. To address this challenge, an innovative adaptive protection scheme that considers FR, changes in network topology, and injected current from the opposite end of the line is proposed. By estimating the equivalent circuit impedances (ECIs) of the network connected to the terminal of the TL, this protection scheme utilizes impedance estimation techniques at the line terminals and offline network information. Simulation studies (tested on the IEEE 39‐bus standard network) show that the proposed scheme accurately estimates fault location (FL) and FR with high precision. The simulation results demonstrate its effectiveness in improving the performance of conventional distance protection relays in both the first and second protection zones (Zone1 and Zone2 ).

An Adaptive Backup Distance Relaying Scheme Based on Communication Between Neighboring Substations

A Simplified Method of Distance Relay Zone-Ⅱ Setting Calculation and a Region-based Backup Relaying Scheme

Research on a Distance Relay-Based Wide-Area Backup Protection Algorithm for Transmission Lines

Research on Local Backup Protection of Transformer and Substation Area Backup Protection

Adaptive Distance Relay for Preventing Error Action of Reactive Fault

A distributed relay selection method for relay assisted Device-to-Device communication system

Research on Quantitative Assessment System for Relaying Protection Scheme of Digital Substation

Design Scheme of Local Relay Protection Wireless Access Technology for Intelligent Substation

Regional Area Protection Scheme for Modern Distribution System

An adaptive distance protection scheme considering fault resistance, injected current, and structural changes in the power system

An Integrated Protection Scheme Based On A Distance Approach

Overview of Wide-Area Relaying Protection System

A fault-component based adaptive distance protection scheme

New Type Adaptive Distance Relay with Improved Performance

Solution to Avoid Unreasonable Action of Remote Backup Protection under Post-fault Overload Condition

Adaptive Zone-2 Distance Protection Scheme for Multi-Terminal Line Connecting Wind Farm

Study of Rreliability Mmodeling for Rrelay Pprotection Ssystem in Ddigital Ssubstations

NOISE EVALUATION BASED ADAPTIVE FAST DISTANCE RELAY PROTECTION

Partial Channel State Information Based Cooperative Relaying And Partner Selection

An Adaptive Noncommunication Protection for Distribution Systems

Study on the Relay Selection Algorithms of Wireless-cell System