Abstract:This paper addresses new challenges arising from the emergence of Bluetooth mesh and its rapid adoption in Internet of Things (IoT) and Industrial IoT.One of the main problems associated with Bluetooth mesh is the power consumption of the mesh nodes, since the network needs to be scanned constantly to receive and relay messages. In order to reduce the energy consumption in the nodes where possible, the friendship mechanism is provided as a solution by the Bluetooth mesh specification.The friendship mechanism enables Low Power Nodes (LPNs) to spend most of their lifetime in sleep mode without losing the messages addressed to them. For this purpose, a node that is constantly in scan mode, called friend node (FN), stores these messages, sending them on request. This mechanism works with a stop-and-wait protocol, resulting in inefficient channel utilisation. However, to the best of our knowledge, there are no proposals for the optimisation of this mechanism, likely due to its novelty.This paper studies different approaches for the optimisation of the friendship mechanism: improving the Bearer Layer, improving time synchronization and improving advertising channel utilisation. The results of this study reveal that each of the proposals presents a limitation that makes its final implementation unfeasible, and thus the challenge arises of developing a proposal for its optimisation. Accordingly, this work presents a proposal to optimise the friendship mechanism with Burst Transmissions and Listen Before Transmit (BTLBT), which has been evaluated and validated in real hardware platforms. The results obtained for 4 LPNs show a reduction in the time required to receive the FN messages, as well as a 66.65% reduction in the time required to scan for each message. Finally, a consumption study is presented, where the results show that our proposal achieves a 19.81% improvement in lifetime compared to the standard friendship mechanism.

GreenLink: An Energy Efficient Scatternet Formation for BLE Devices.

BLEdge: Edge-centric Programming for BLE Applications with Multi-Connection Optimization

ACE: A Routing Algorithm Based on Autonomous Channel Scheduling for Bluetooth Mesh Network

RT-BLE: Real-time Multi-Connection Scheduling for Bluetooth Low Energy.

TinyNet

BluePower " A New Distributed Multihop Scatternet Formation Protocol for Bluetooth Networks

Bluetooth Low Energy mesh network for power-limited, robust and reliable IoT services

A Comprehensive Evaluation of Bluetooth Low Energy Mesh

Energy Analysis of Device Discovery for Bluetooth Low Energy

BEANet: An Energy-efficient BLE Solution for High-capacity Equipment Area Network

Energy-Efficient Scheme For Ieee 802.15.4 Compliant Device

Towards Efficient BLE Mesh: Design of an Autonomous Network Joining Algorithm

Reducing the energy consumption of the friendship mechanism in Bluetooth mesh

Adaptive Device Discovery in Bluetooth Low Energy Networks

ON THE DESIGN OF AN ENERGY-EFFICIENT DATA COLLECTION SCHEME FOR BODY AREA NANONETWORKS

Modeling and performance analysis of device discovery in Bluetooth Low Energy networks

WMLinks: Wearable Smart Devices and Mobile Phones Linking through Bluetooth Low Energy (BLE) and WiFi Signals

Optimizing Packet Reception Rates for Low Duty-Cycle BLE Relay Nodes

BlueSky: Realizing Buried Potential of Bluetooth to Sustain a Large-scale Multi-hop Network

SDN On BLE: Controlling Resource Constrained Mesh Networks

dBBlue: low diameter and self-routing Bluetooth scatternet