ADAPTIVE MEASUREMENT OF POWER SYSTEM FREQUENCY

he benteng,li ju

1991-01-01

Abstract:A new method for measuring power system frequency is presented in this paper. Thecalculation of the method is simple and fast. The accuracy of measurement is raised highlyby adaptive sampling. The simulation test show that the method can measure the frequen-ey correctly when change of frequency is less than 50Hz and the measurement error is lessthan 0.0005Hz.

What problem does this paper attempt to address?

Analytic Assessment of the Power System Frequency Security

Ping Ju,Yi Zheng,Yuqing Jin,Chuan Qin,Yefeng Jiang,Lu Cao

DOI: https://doi.org/10.1049/gtd2.12171

2021-01-01

Abstract:Recently, with the increased intermittent renewable energy penetration, many power grids have been incorporated into a large-scale long-distance UHV AC–DC hybrid system. In the actual grid, power disturbances, such as DC blocking faults and trip-off of wind turbines, often occur, resulting in power shortages and large frequency ﬂuctuations. However, the existing approaches to assess the system frequency security are not reliable. This paper proposes an analytic formula for the system frequency response based on a generic system frequency-response (SFR) model, which can be applied to modern large-scale power systems. First, a generic SFR model with a reasonable structure is designed according to the parameter determination strategy. Second, according to the transfer function in the model, the time-domain analytic formula of the frequency response is obtained by realizing the inverse Laplace transform. Moreover, four main indexes are established to represent the characteristics of the frequency dynamic process in different periods, and these indexes are qualitatively and quantitatively analysed. Finally, the New England 10-unit 39-bus power system and East China Power Grid are considered to demonstrate the key features of the proposed method. The results show that the proposed analytic assessment method can be effectively adopted in several applications.
New Frequency Measuring Method in Power System

LUO Guang-fu,MEI Hong-wei,JI Yan-chao

DOI: https://doi.org/10.3969/j.issn.1003-8930.2005.02.002

2005-01-01

Abstract:Frequency is a very important characteristic quantity in power systems. Frequency measuring acts a very important role in power system measuring equipments. This paper presents a useful method for frequency measuring. This method is easy to be implemented with small calculation, high precision and a good real-time performance. The validity of this proposed method is verified through numerical simulation in the case of taking account of original phase, the bits of A/D and the sampling frequency. The results prove that this method has some practical value.
REAL TIME ESTIMATION OF POWER SYSTEM FREQUENCY

jin huafeng,he benteng

1998-01-01

Abstract:A new method based on zero crossing is presented for estimating power system frequency.This method can estimate power system frequency precisely through simple calculating and follow the tracks of the frequency deviation quickly.In this paper,some simulation are presented for evaluating the influences by harmonics and random noises,and the property for following the tracks of the frequency deviation.
A High-Accuracy Algorithm for Measuring Frequency of Power System Based on Fourier Filter

LI Yi-quan,HE Ben-teng

DOI: https://doi.org/10.3321/j.issn:0258-8013.2006.02.014

2006-01-01

Abstract:The information of the sine signal filtered by Fourier algorithm is studied and the conclusion is achieved that the real part and imaginary part of the phasor gained by Fourier algorithm satisfy an identical equation with the shifting of the data window. Hence, a new algorithm of frequency measurement comes into being. To improve the measurement accuracy of this algorithm with harmonics, iteration method is introduced based on the last calculated frequency, and interpolations are used to original samples for faster convergence speed by which we can accurately obtain fundamental frequency in 23ms.Finally, signals with harmonics and noises are simulated respectively,and the results show the high accuracy of this algorithm in all these situations.
A NOVEL APPROACH TO MEASUREMENT OF POWER SYSTEM FREQUENCY USING ADAPTIVE NOTCH FILTER

张世平,赵永平,张绍卿,李德胜

DOI: https://doi.org/10.3321/j.issn:0258-8013.2003.07.017

2003-01-01

Abstract:A new approach for power system frequency estimating is proposed. The approach consists of two stages adaptive notch filter. The first stage eliminates harmonics and enhances the fundamental waveform. The subsequent notch filter is fed with down sampled version of enhanced signal obtained from previous stage. Down sampling expands the spectrum of signal, thus making it easier to detect. The adaptive coefficients of notch filter are obtained by a non-gradient algorithm. The proposed algorithm is computationally efficient and its adaptive adjustment process is simple for real time implementation. Moreover, some simulations demonstrate the effectiveness of the algorithm in the presence of harmonics and noise.
REAL-TIME MEASUREMENT OF POWER SYSTEM INSTANTANEOUS FREQUENCY WHILE POWER SYSTEM SWINGS

许庆强,索南加乐,宋国兵,施静辉,葛耀中

DOI: https://doi.org/10.3321/j.issn:0258-8013.2003.01.011

2003-01-01

Abstract:An algorithm for measuring instantaneous frequency of power system is presented in this paper,which applying to two current frequency components in a trans-mission line while power system swings. The method is based on rigorous mathematical deducing and recombine itself with iteration and Taylor series expansions. The measuring frequency is used for eliminating unbalanced current of negative sequence,extracting fault components and measuring impedance. The algorithm provides relaying device with accurate information so that the performance of relaying device can be improved. Main parameters that affect the accuracy of the algorithm have been discussed,and the problem of zero-point is solved too. The algorithm allows for the noise immunity characteristic and the truncation errors of A/D converter. The accuracy of this algorithm has been proved by simulation experiment. The method responds quickly to the instantaneous frequency changing, and the result will not be influenced by the voltage difference of two ends.
New Method for Measuring Actual Frequency and Harmonic Contents of Power Systems

CHEN Jun,ZHAO Wei,CHU Renxin

DOI: https://doi.org/10.3321/j.issn:1000-0054.2000.01.008

2000-01-01

Abstract:A novel method for measuring the actual power frequency is described. This method assumes that the approximate frequency of the measured signal is known and the actual frequency can be deduced from sampled data. An algorithm for analyzing the approximate power harmonics is also presented. The algorithm differs from discrete Fourier transform (DFT), in that, when sampling is a synchronous, the frequency of the factor in the algorithm is always coincident with the k th harmonic, so the error caused by asynchronous sampling can be effectively reduced. The algorithm has been tested on a PC card type virtual instrument. The simulated results show that the proposed method and the approximate algorithm can be readily put into practice.
New Algorithm of Electric Power System Fast Frequency Measurement Decreasing the Influences Coming from Measurement Errors

Qingqiang Xu,Jiale Suonan,Jinghui Shi,Yaozhong Ge

DOI: https://doi.org/10.3321/j.issn:0253-987X.2001.06.003

2001-01-01

Abstract:A new algorithm of electrical power system fast frequency measurements is presentd. The algorithm decreases the influences created by the transfiguration of waveform and A／D sampling errors by using sin（πfT） in the calculation of frequency. It lowers the effects of sampling errors on frequency measurements. The accuracy and reliability of this algorithm have been proved by simulation experiment.
Adaptive Frequency Adjustment Method for Impedance Measurement

Meng Li,Heng Nian,Bin Hu,Yunyang Xu,Yuming Liao,Jun Yang

DOI: https://doi.org/10.1109/jestpe.2021.3077999

IF: 5.462

2022-01-01

IEEE Journal of Emerging and Selected Topics in Power Electronics

Abstract:Impedance measurement is an effective method to obtain the impedance model of the renewable power generation equipment (RPGE). On the basis of the measurement points, the impedance characteristic curves of the RPGE can be obtained. The distribution of the measurement points will influence the accuracy of the obtained curves. In order to obtain accurate impedance curves effectively, adaptively adjusted frequency intervals could be used which can reduce the required number of the measurement frequencies and improve the measurement efficiency. Moreover, the existing work can still be further enhanced by implementing a fitting algorithm while adaptively adjusting the measurement frequencies. In this article, an improved adaptive adjustment method for the measurement frequencies in the impedance measurement based on a vector fitting algorithm is proposed. By implementing a fitting algorithm, the impedance characteristic at unmeasured frequencies can be predicted, which can further raise the measurement efficiency and meanwhile obtain the accurate impedance curves. The measurement frequencies will be adjusted adaptively according to the measurement points and fitting curves. The experiments based on control-hardware-in-loop (CHIL) are conducted to verify the effectiveness of proposed adaptive frequency adjustment method.
A Sampling Optimized Method for Frequency Response Measurement in Power Electronics Systems

Zipeng Liu,Jinjun Liu,Zeng Liu

DOI: https://doi.org/10.1109/tpel.2022.3153091

IF: 5.967

2022-01-01

IEEE Transactions on Power Electronics

Abstract:Frequency response measurement plays a crucial role in the design, analysis, and debugging of power electronics systems. However, traditional measurement methods, including the sweep method and the adaptive frequency injection method, have some problems in ease of use, stability, accuracy, and data inheritance. To address these problems, this article establishes a sampling optimized method based on the idea of global optimization by placing each measurement point in the interval with the largest estimated measurement error in the corresponding measurement cycle, so as to achieve a rapid reduction of the total measurement error. Compared with traditional methods, this method is easy to use, highly stable, and has higher accuracy than traditional methods, and its good data inheritance also allows users to incrementally add new points after the measurement is completed to further improve the accuracy. In addition, the importance of Uniqueness of Search Path is also revealed in this article. The effectiveness of the proposed method is demonstrated through extensive numerical tests and experiments.
Research on non-synchronous sampling errors in electric power system

Hao Qian,Cheng-bo NI,Rong-xiang ZHAO

DOI: https://doi.org/10.3969/j.issn.1004-3950.2005.03.002

2005-01-01

Energy Engineering

Abstract:The frequency of the electric power signal is always fluctuating, which makes it difficult to exactly realize the synchronous sampling. And the leakage and picket fence effects of FFT will result in obvious measure errors. The advantages and disadvantages of different measures are analyzed with the software and hardware, and it demonstrates that the analysis accuracy of the signal and the creditable degree of the measurement parameters are further improved.
Approximate Linear Amplitude Model Based Algorithm for Measuring Power System Frequency

Qingshan Xu,Qingqiang Xu,Kazuto Yukita,Katsuhiro Ichiyanagi

DOI: https://doi.org/10.1002/tee.21693

IF: 0.923

2012-01-01

IEEJ Transactions on Electrical and Electronic Engineering

Abstract:A novel algorithm for measuring the power system frequency during a very short time is presented in this paper, based on an approximate linear current amplitude model. The presented measuring frequency algorithm is used to get the instantaneous value of the parameter accurately. In the algorithm, the amplitudes of four consecutive sampled currents are supposed to be linear. After rigorous mathematical deduction, including Taylor series expansion and the geometric proportion theorem, the instantaneous frequency could be derived. The errors arising from the linearization in the model are analyzed qualitatively, and then the errors of A/D conversion and Taylor series expansion are considered. By the proposed technique, the measured frequency can be derived easily, quickly, and accurately, without any digital filters. The results after simulation show that the proposed algorithm has high accuracy and noise immunity during power swings and in the normal state. (c) 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.
Frequency Measurement Algorithm Based on Frequency Shift and Filtering

LI Jianmin,TENG Zhaosheng,WU Yan,WANG Yong

DOI: https://doi.org/10.13334/j.0258-8013.pcsee.170666

2018-01-01

Abstract:Since the frequency fluctuation exists the actual power system which makes the strictly synchronous sampling condition can hardly meet, the frequency and other parameters of the power system are difficult to accurately measure. To deal with this problem, a novel frequency measurement algorithm based on frequency shift and filtering is proposed by this paper. By simply shifting the frequency components of the original signal and passing the shifted signal through a filter, the frequency of the power system can be obtained accurately. Compared with typical frequency measurement methods in the time domain, the proposed algorithm has small computational complexity, real-time and simple algorithm. Besides that, compared with traditional Fourier algorithm and its improved methods, our algorithm does not require solving equations and windowed interpolation operations and can effectively overcome the drawbacks of traditional Fourier algorithm which are spectrum leakage and fence effect. The proposed method has been tested under the conditions of fundamental frequency fluctuation, different sampling frequencies, different sampling points, various word-length of the analog to digital converter and different signal-to-noise ratios, respectively. The simulation results show that the proposed algorithm can achieve the accurate measurement of the power system frequency and effectively inhibit white noise interference. The application in an experimental test platform verified the accuracy and reliability of the proposed method.
Measurement of power system dynamic frequency when signal amplitude changes

Yong Min,Renjie Ding,Weihua Xiong,Yingduo Han

1997-01-01

Abstract:This paper discusses the effect that signal amplitude changes have on the results of frequency measurement in power systems, advances the concept of signal's apparent frequency based on the analysis of the basic assumption of different frequency measurement approaches, proves that the apparent frequency is the superposition of actual signal frequency and some high frequency components (close to twice the normal frequency, about 100Hz in 50Hz systems), and frequency measurement approaches can not get the actual frequency directly. Instead of that, the results of approaches are more similar to the apparent frequency and also contains some high frequency components. The paper then provides an approach to derive the actual signal frequency from the measured frequency and gives a simple example.
REAL-TIME ESTIMATION OF POWER SYSTEM OSCILLATION PERIOD

he benteng,jin huafeng

DOI: https://doi.org/10.3321/j.issn:1000-1026.2000.15.008

2000-01-01

Abstract:After discussing the conceptions of power system average frequency and power system oscillation period. this paperanalyzes the characteristics of current near the center of oscillation and the r elation between real oscillation period andunbalance of current--change. which is derived from the presumed oscillation per iod. This paper presents a new method forestimating the oscillation period of power system. Some simulations are given fo r evaluating the influences by system case.harmonics, random noises and oscillation period--change. The results indicate th at this method is much precise for estimatingthe power system oscillation period and will not be influenced by the difference of system cases. It also responds quickly afterthe oscillation period changed.
Measurement of Power System Harmonic Based on Adaptive Kaiser Self-Convolution Window

Wenxuan Yao,Zhaosheng Teng,Qiu Tang,Yunpeng Gao

DOI: https://doi.org/10.1049/iet-gtd.2015.0620

2016-01-01

Abstract:As the rapid development in power electronic devices, the harmonic pollution becomes one of principle power quality problems in power system. The fast Fourier transform (FFT) is widely used for analysing and measuring power system harmonics. However, the limitation of the FFT such as an aliasing effect, spectrum leakage picket-fence effect, would contribute to inaccuracy results. Furthermore, the real power system harmonic is actually a non-stationary signal while FFT is a tool for stable signal. This study focuses on a novel FFT based method for time-varying power system harmonic measurement. The harmonic signal is preprocessed by infinite impulse response filter bank and Teager-Kaiser energy operator for fast detection of instability onset time. Then an adaptive Kaiser self-convolution window-based interpolated FFT algorithm is used to estimate each harmonic component. The results of both simulation and practical implementation show that the proposed method is suitable to deal with time-varying harmonic and achieves a higher accuracy compared with the traditional FFT-based techniques.
A Fast Evaluation Algorithm on Frequency Stability for Power System with High-penetration Renewable Energy Considering Security Control Measures

Zhang Gang,Ke Xianbo,Liu Bin,Niu Shuanbao,Huo Chao,Ren Chong

DOI: https://doi.org/10.1109/ispec50848.2020.9350980

2020-01-01

Abstract:In this paper, a fast evaluation method on power system frequency stability is proposed. System frequency response characteristic is further studied, which reveals the main constraints on system frequency stability in the power grid with renewable energy. Considering the DC blocking happened in the receiving-end power grid, security control measure is also introduced to maintain the frequency in an allowed range. Furthermore, the quantitative relationship between maximum frequency deviation and minimum system inertia is researched. In a case study of Northwest Power Grid, the results show that the proposed method has a promising significance on engineering applications.
POWER SYSTEM DYNAMIC FREQUENCY MEASUREMENT BASED ON NOVEL INTERPOLATED STFT ALGORITHM

Junhao Zhang,He Wen,Zhaosheng Teng,Radek Martinek,Petr Bilik

DOI: https://doi.org/10.15598/aeee.v15i3.2179

2017-01-01

Advances in Electrical and Electronic Engineering

Abstract:As the product of time and frequency resolution of the Short-Time Fourier Transform (STFT) constant, the dynamic frequency measurement accuracy provided by the STFT is reduced under asynchronous sampling. This paper proposes a novel Interpolated Short-Time Fourier Transform (IpSTFT) based on the Blackman window. The Blackman window is adopted to reduce the spectral leakage, and the spectral interpolation procedure is applied to eliminate the picket-fence effects. Results of simulations are provided to show that the proposed method can improve the accuracy of dynamic frequency measurement significantly with low time consumptions.
The Adaptive Predictive Algorithm of Sampling Rate in Power System

ZHU An-fu,SU Tao,LI Yun-fei

DOI: https://doi.org/10.3969/j.issn.1009-5128.2005.02.012

2005-01-01

Abstract:The variance of frequency in electrical power system affects the error of data acquiring and parameter measurement. The paper introduces an adaptive predictive algorithm of sampling rate for electric power system. This algorithm for estimating sampling rate is effective for measuring A.C. signal using DSP.
Method for Accurately Measuring the Power-Frequency Parameters of Ehv/Uhv Transmission Lines

Xiangguo Yang,Guangchao Geng,Yang Wang,Tianyu Ding

DOI: https://doi.org/10.1049/iet-gtd.2016.1359

2017-01-01

Abstract:Power-frequency parameters of long-distance extreme-high-voltage (EHV) and ultra-high-voltage (UHV) transmission lines are the basis of power system modelling and analysis, but these parameters are especially difficult to accurately measure due to the reactance-dominated nature and strong external interference. An accurate power-frequency parameter measurement approach is proposed in this study. The idea is to utilise frequency response curve to indirectly extrapolate transmission line parameters at power frequency. As no direct measurement is conducted at power frequency, the potential power-frequency interference is avoided. A resonance-based measurement method is employed to eliminate the effect of large impedance phase angle of EHV/UHV systems and identify positive-and zero-sequence resistance with enhanced accuracy. In order to validate the effectiveness of the proposed approach, a prototype instrument was developed and used to measure power-frequency parameters of a scale-down laboratory transmission line system. Comparative results confirmed the accuracy priority of the proposed approach over existing power-frequency measurement methods. In addition, the anti-interference performance in terms of the impact of the parallel in-service transmission line also indicates the proposed approach is more advantageous as it has lower capacity requirement on the measurement device.

ADAPTIVE MEASUREMENT OF POWER SYSTEM FREQUENCY

Analytic Assessment of the Power System Frequency Security

New Frequency Measuring Method in Power System

REAL TIME ESTIMATION OF POWER SYSTEM FREQUENCY

A High-Accuracy Algorithm for Measuring Frequency of Power System Based on Fourier Filter

A NOVEL APPROACH TO MEASUREMENT OF POWER SYSTEM FREQUENCY USING ADAPTIVE NOTCH FILTER

REAL-TIME MEASUREMENT OF POWER SYSTEM INSTANTANEOUS FREQUENCY WHILE POWER SYSTEM SWINGS

New Method for Measuring Actual Frequency and Harmonic Contents of Power Systems

New Algorithm of Electric Power System Fast Frequency Measurement Decreasing the Influences Coming from Measurement Errors

Adaptive Frequency Adjustment Method for Impedance Measurement

A Sampling Optimized Method for Frequency Response Measurement in Power Electronics Systems

Research on non-synchronous sampling errors in electric power system

Approximate Linear Amplitude Model Based Algorithm for Measuring Power System Frequency

Frequency Measurement Algorithm Based on Frequency Shift and Filtering

Measurement of power system dynamic frequency when signal amplitude changes

REAL-TIME ESTIMATION OF POWER SYSTEM OSCILLATION PERIOD

Measurement of Power System Harmonic Based on Adaptive Kaiser Self-Convolution Window

A Fast Evaluation Algorithm on Frequency Stability for Power System with High-penetration Renewable Energy Considering Security Control Measures

POWER SYSTEM DYNAMIC FREQUENCY MEASUREMENT BASED ON NOVEL INTERPOLATED STFT ALGORITHM

The Adaptive Predictive Algorithm of Sampling Rate in Power System

Method for Accurately Measuring the Power-Frequency Parameters of Ehv/Uhv Transmission Lines