Abstract:To reveal the deformation mechanism during tunneling in deep soft ground, triaxial unloading confining pressure tests and triaxial unloading creep tests were carried out on sandy mudstone specimens to study the dilatancy and fracturing behavior of soft rock. In the triaxial unloading confining pressure tests, the stress path and different unloading rates were considered to reflect the unloading characteristics of the excavation methods. The unloading rate effects and the rock damage evolution law are studied. The following conclusions are obtained from the results. Firstly, when the unloading rate is smooth, the peak strengths and deviatoric stress–strain curves under the unloading condition are close to those under the conventional loading condition. Secondly, the post-peak brittle characteristics are more apparent with the increasing unloading rates. Thirdly, the soft rock undergoes five deformation and failure regimes of elasticity, pre-peak unloading damage–dilatancy, post-peak brittle drop, linear strain softening and residual perfect plasticity under quasi-static smooth unloading of mechanized excavation which is mainly focused on in this study. Fourthly, the damage evolution law at the pre-peak damage–dilatancy stage follows an exponential function. Fifthly, during the post-peak stages, multistage microfractures are initiated, propagated and finally coalesced forming a shear-fragmentation band with a certain thickness, accompanied by significant volumetric dilatancy. In the triaxial unloading creep tests, multistep unloading of the confining pressure was applied, while the axial pressure was kept constant. The results show that when the deviatoric stress is larger and the experienced creep time is longer, the unloading effect and creep characteristics become more apparent accompanied with obvious lateral dilatancy, eventually leading to significant creep–dilatancy. The progressive failure with time is caused by the damage accumulating with time-dependent crack expansion, which can be called as ‘time-dependent damage and fracturing’. The reasons for the above evolution process are presented, then the deformation mechanism of soft rock is revealed. The soft rock deformation mainly consists of two parts. One part is the pre-peak damage–dilatancy and post-peak fracture–bulking produced at the excavation unloading instant. The other part is creep–dilatancy caused by time-dependent damage and fracturing in a period of time after excavation. The above-mentioned results of damage, dilatancy and fractures evolution process are in good agreement with the in situ monitoring results and previous studies about the surrounding rock convergence, fracturing and EDZ (excavation damaged zone) development.

Theoretical research on rock unloading mechanical characteristics

Deformation and mechanical properties of rock: effect of hydromechanical coupling under unloading conditions

Experimental Investigation on Deformation Characteristics and Permeability Evolution of Rock under Confining Pressure Unloading Conditions

Mechanical Response and Failure Characteristics of Granite under Unloading Conditions and Its Engineering Application

Experimental Investigation on Deformation and Strength Behavior of Marble with the Complex Loading-Unloading Stress Path

Experimental mechanical strength and deformation characteristics of deep damaged–fractured rock

Research on the Mechanical Characteristics of Cyclic Loading and Unloading of Rock Based on Infrared Thermal Image Analysis

ANALYSIS OF LOCALIZATION OF DEFORMATION AND COMPLETE STRESS-STRAIN RELATION FOR MESOSCOPIC HETEROGENOUS BRITTLE ROCK MATERIALS WHEN AXIAL STRESS ISHELD CONSTANT WHILE LATERAL CONFINEMENT IS REDUCED

A novel anisotropic deterioration mechanical model for rock ductile–brittle failure under 3D high-stress and its application

Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions

Energy Evolution and Damage Characteristics of Rock Materials under Different Cyclic Loading and Unloading Paths

ANALYSIS ON POST-FAILURE BEHAVIORS OF ROCK IN UNIAXIAL COMPRESSION USING DISTURBED STATE CONCEPT THEORY

Experimental Study on Shear Behavior of Rock Composite Material under Normal Unloading Conditions

Energy Evolution and Brittleness Analysis of Sandstone Under Confining Pressure Unloading

Phase-field simulations of unloading failure behaviors in rock and rock-like materials

Study on Unloading Rock Mass Constitutive Relationship

Analysis of the localization of damage and the complete stress-strain relation for mesoscopic heterogeneous rock under uniaxial tensile loading

Experimental study on the shear mechanical behaviour of rock-like materials containing one embedded flaw under unloading normal stress conditions

Theoretical shear damage characterization of intact rock under compressive-shear stress considering energy dissipation

Stress–Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard Rock

Experimental Study on the Dilatancy and Fracturing Behavior of Soft Rock Under Unloading Conditions