Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

Theoretical Model of Frost Layer’s Thermal Conductivity at Different Porosity

Thermal conductivity of frost layer on finned-tube vaporizer based on fractal theory

An Experimental Study on the Air Side Heat Transfer Performance of the Perforated Fin-Tube Heat Exchangers under the Frosting Conditions

A Semi-Empirical Model for Predicting Frost Properties

Investigation of the Morphology and Heat Transfer Characteristics of the Frost Layer During the Early-Stage Formation with a Cellular Automata Model

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

Lattice Boltzmann Simulation of Frost Formation Process

A Semi-empirical Model of Frost Formation on a Cryogenic Surface Cooled from Ambient Temperature under Forced Convection Condition

A SIMPLIFIED MODEL FOR ESTIMATING FROST LAYER THICKNESS ON SURFACE

A modified CFD model for frosting on a horizontal plate

Analysis of the frost layer growth process based on melting-reconsolidation

Experimental study on frost layer's thermal conductivity of cryogenic vertical plate under natural convection condition

A Lattice Boltzmann Study of Frost Growth on a Cold Surface

A thermal conductivity model for granular geomaterials with low porosity during the freezing process

Thermal Conductivity Model Analysis of Unsaturated Ice-Containing Soil

Fundamentals of Heat and Mass Transport in Frost-Resistant Plant Tissues

Phase change mass transfer model for frost growth and densification

Experimental Study on Frost Crystal Morphologies and Frosting Characteristics under Different Working Pressures

A capillary bundle model for the electrical conductivity of saturated frozen porous media

Frost Heave in Coarse-grained Soils: Experimental Evidence and Numerical modelling

Empirical modeling of pore size distribution for rock materials with its impact on pore water freezing