Abstract:The internal pore structural characteristics and microbubble distribution features of concrete have a significant impact on its frost resistance, but their size is relatively small compared to aggregates, making them difficult to visually represent in the mesoscopic numerical model of concrete. Therefore, based on the ice-crystal phase transition mechanism of pore water and the theory of fine-scale inclusions, this paper establishes an estimation model for effective thermal conductivity and permeability coefficients that can reflect the distribution characteristics of the internal pore size and the content of microbubbles in porous media and explores the evolution mechanism of effective thermal conductivity and permeability coefficients during the freezing process. The segmented Gaussian integration method is adopted for the calculation of integrals involving pore size distribution curves. In addition, based on the concept that the fracture phase represents continuous damage, a switching model for the permeability coefficient is proposed to address the fundamental impact of frost cracking on permeability. Finally, the proposed estimation models for thermal conductivity and permeability are applied to the cement mortar and the interface transition zone (ITZ), and a thermal-hydraulic-mechanical coupling finite element model of concrete specimens at the mesoscale based on the fracture phase-field method is established. After that, the frost-cracking mechanism in ordinary concrete samples during the freezing process is explored, as well as the mechanism of microbubbles in relieving pore pressure and the adverse effect of accelerated cooling on frost cracking. The results show that the cracks first occurred near the aggregate on the concrete sample surface and then extended inward along the interface transition zone, which is consistent with the frost-cracking scenario of concrete structures in cold regions.

Theoretical model of thermal conductivity in frost layer

Theoretical Model of Frost Layer’s Thermal Conductivity at Different Porosity

Thermal conductivity of frost layer on finned-tube vaporizer based on fractal theory

Computer Simulation of Frost Growth and Computation of Its Thermal Conductivity

Investigation of the Morphology and Heat Transfer Characteristics of the Frost Layer During the Early-Stage Formation with a Cellular Automata Model

A Semi-Empirical Model for Predicting Frost Properties

A new time- and space-dependent model for predicting frost formation

A Fractal Model on Vapor Diffusion in Frost

A Numerical Study of Heterogeneous Nucleation of Ice Crystals and Frost Layer Growth on Horizontal Cold Surfaces

Lattice Boltzmann Simulation of Frost Formation Process

Numerical Simulation on Frost of Cryogenic Finned-Tube Vaporizer Based on Fractal Theory

Simulation of Frost-Heave Failure of Air-Entrained Concrete Based on Thermal-Hydraulic-Mechanical Coupling Model

A Lattice Boltzmann Study of Frost Growth on a Cold Surface

Analysis of the frost layer growth process based on melting-reconsolidation

A SIMPLIFIED MODEL FOR ESTIMATING FROST LAYER THICKNESS ON SURFACE

Numerical simulation of frost formation in diffusion limited aggregation

Frost model and numerical simulation of air-heating fin-tube vaporizer

Visualization observation of frost crystal evolution on cold surface

Experimental and theoretical study of frost melting water retention on fin surfaces with different surface characteristics

A Semi-empirical Model of Frost Formation on a Cryogenic Surface Cooled from Ambient Temperature under Forced Convection Condition

A new model for predicting performance of fin-and-tube heat exchanger under frost condition