Abstract:Silicon-based materials have become one of the most likely materials to replace graphite anodes of Li-ion batteries due to their ultra-high theoretical specific capacity, safe lithium intercalation potential, and abundant reserves. However, the large volume effect of silicon-based materials during cycling has become a serious obstacle to their commercial application. Silicon-metal composite is one of the potential solutions to alleviate the volume effect of silicon-based anode. Traditional electrodes are prepared by slurry coating method, and the electrodes crack and fall off after many cycles, resulting in capacity loss. In this paper, a cold spraying method combined with ball milling was proposed to prepare silicon-copper composite electrodes to improve the bonding between electrode materials and the cycling stability of the electrodes. Composite powders with different component ratios were first prepared. Then, the micromorphology, bond strength, thermal conductivity, and electrochemical performance of the electrodes prepared by the slurry coating method and the cold spray method were analyzed, respectively. The results show that the Cu 100- x Si x cold sprayed electrodes have higher bond strength and porosity, while the higher porosity of the cold-sprayed electrodes does not promote heat transfer. After the addition of conductive carbon black, the electrodes exhibit better structural stability, cycling performance, capacity retention, and reaction kinetics, with the Cu 80 Si 20 + SP cold prayed electrode exhibiting 600 mAh g −1 after 200 cycles. This work not only successfully prepared a silicon-copper composite anode with excellent performance but also provided a reference for the preparation of other composite electrodes by cold spray combined with ball milling.

Preparation and Electrochemical Performance Study of the Si/C Composite Electrode

Enhancement of the electrochemical performance of silicon/carbon composite material for lithium ion batteries

Preparation and Characterization of High Capacity Si-Cu/C Composites as Anode Materials for Lithium-Ion Battery Anodes

Preparation of SiO/C anode materials for Li-ion batteries and its performance

High-performance SiO/C Composite Anode Material for Lithium Ion Battery

Preparation of Si-Based Composite Anode for Li-Ion Batteries by Cold Spraying and Its Electrochemical Performance

Preparation and Study on Si/Ag/C Composite As Anode Material for Lithium Ion Batteries

Study Of Nano-Porous Si/Graphite/C Composite Anode Materials For Li-Ion Batteries

High Capacity Sial/C Anode Material for Lithium-Ion Batteries

A high-performance silicon/carbon composite as anode material for lithium ion batteries

Si/C composite nanofibers with stable electric conductive network for use as durable lithium-ion battery anode

Study of Porous Si/C Composite Anode for Lithium Ion Batteries

In-Situ Preparation Of Si@C Composite Anode Materials For Lithium Ion Batteries

Improvement of Cycle Performance for Silicon/Carbon Composite Used As Anode for Lithium Ion Batteries

Si@Cu composite anode material prepared by magnetron sputtering for high-capacity lithium-ion batteries

The impact of carbon material microstructure on li-ion storage behaviors of Si in Si/C anodes

Synthesis and electrochemical performance of Si/Cu and Si/Cu/graphite composite anode

Electrochemical Performance Enhancement of Porous Si Lithium-Ion Battery Anode by Integrating with Optimized Carbonaceous Materials

A Se/C composite as cathode material for rechargeable lithium batteries with good electrochemical performance

A high performance silicon/carbon composite anode with carbon nanofiber for lithium-ion batteries

Si/C Composites for High Capacity Lithium Storage Materials