Abstract:Silicon-based materials have become one of the most likely materials to replace graphite anodes of Li-ion batteries due to their ultra-high theoretical specific capacity, safe lithium intercalation potential, and abundant reserves. However, the large volume effect of silicon-based materials during cycling has become a serious obstacle to their commercial application. Silicon-metal composite is one of the potential solutions to alleviate the volume effect of silicon-based anode. Traditional electrodes are prepared by slurry coating method, and the electrodes crack and fall off after many cycles, resulting in capacity loss. In this paper, a cold spraying method combined with ball milling was proposed to prepare silicon-copper composite electrodes to improve the bonding between electrode materials and the cycling stability of the electrodes. Composite powders with different component ratios were first prepared. Then, the micromorphology, bond strength, thermal conductivity, and electrochemical performance of the electrodes prepared by the slurry coating method and the cold spray method were analyzed, respectively. The results show that the Cu 100- x Si x cold sprayed electrodes have higher bond strength and porosity, while the higher porosity of the cold-sprayed electrodes does not promote heat transfer. After the addition of conductive carbon black, the electrodes exhibit better structural stability, cycling performance, capacity retention, and reaction kinetics, with the Cu 80 Si 20 + SP cold prayed electrode exhibiting 600 mAh g −1 after 200 cycles. This work not only successfully prepared a silicon-copper composite anode with excellent performance but also provided a reference for the preparation of other composite electrodes by cold spray combined with ball milling.

Synthesis and electrochemical performance of Si/Cu and Si/Cu/graphite composite anode

Cu5Si–Si/C composites for lithium-ion battery anodes

Preparation and Characterization of High Capacity Si-Cu/C Composites as Anode Materials for Lithium-Ion Battery Anodes

Electrochemical reaction of the SiMn/C composite for anode in lithium ion batteries

Novel Design of Uniform Si@graphite@C Composite As High-Performance Li-ion Battery Anodes

Carbon-coated Si-Cu/graphite Composite As Anode Material for Lithium-ion Batteries

SiMn–Graphite composites as anodes for lithium ion batteries

Electrochemical investigation of silicon/carbon composite as anode material for lithium ion batteries

Solid-state reaction synthesis of amorphous/nanostructured Si@SiO -Cu3Si composites by mechanical milling for lithium-ion anodes

Electrochemical properties of Si-Mn/C as anode materials for lithium ion batteries

Electrochemical Performance Of Si-Mn Composites In Li-Ion Battery

Functionalization-assistant ball milling towards Si/graphene anodes in high performance Li-ion batteries

High-performance SiO/C/G Composite Anode for Lithium Ion Batteries

Study Of Nano-Porous Si/Graphite/C Composite Anode Materials For Li-Ion Batteries

Si–Mn composite anodes for lithium ion batteries

Electrochemical Performance Enhancement of Porous Si Lithium-Ion Battery Anode by Integrating with Optimized Carbonaceous Materials

Preparation and Study on Si/Ag/C Composite As Anode Material for Lithium Ion Batteries

Enhancement of the electrochemical performance of silicon/carbon composite material for lithium ion batteries

Preparation of Si-Based Composite Anode for Li-Ion Batteries by Cold Spraying and Its Electrochemical Performance

Preparation of SiO/C anode materials for Li-ion batteries and its performance

Si@Cu composite anode material prepared by magnetron sputtering for high-capacity lithium-ion batteries