Abstract:This paper presents advancements in the performance of digital phase-locked loop (DPLL)s, with a special focus on addressing the issue of required gain calibration in the time-to-digital converter (TDC) within phase-domain DPLL structures. Phase-domain DPLLs are preferred for their simplicity in implementation and for eliminating the delta–sigma modulator (DSM) noise inherent in conventional fractional-N designs. However, this advantage is countered by the critical need to calibrate the gain of the TDC. The previously proposed dual-interpolated TDC(DI-TDC) was proposed as a solution to this problem, but strong spurs were still generated due to the TDC resolution, which easily became non-uniform due to PVT variation, degrading performance. To overcome these problems, this work proposes a DPLL with a new calibration system that ensures consistent TDC resolution matching the period of the digitally controlled oscillator (DCO) and operating in both the foreground and background, thereby maintaining consistent performance despite PVT variations. This study proposes a DPLL using a calibrated dual-interpolated TDC that effectively compensates for PVT variations and improves the stability and performance of the DPLL. The PLL was fabricated in a 28-nm CMOS process with an active area of only 0.019 mm2, achieving an integrated phase noise (IPN) performance of −17.5 dBc, integrated from 10 kHz to 10 MHz at a PLL output of 570 MHz and −20.5 dBc at 1.1 GHz. This PLL operates within an output frequency range of 475 MHz to 1.1 GHz. Under typical operating conditions, it consumes only 930 μW with a 1.0 V supply.

A 0.0129 Mm 2 DPLL with 1.6~2.0 Ps RMS Period Jitter and 0.25-to-2.7 GHz Tunable DCO Frequency Range in 55-Nm CMOS

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 0.001-Mm$$^{2}$$ 112.32-$$\Upmu $$W All-Digital PLL with Dual-Tuned DCO and Dual-Tuned Control Algorithm

A 7.2G-16Ghz ADPLL Based on a Single-Core Dual-Mode DCO

A 23-30.8GHz All-digital Phase-Locked Loop for 5G Communication System

A 5.4 GHZ All-Digital Phase-Locked Loop with a wide output swing and high-linearity DAC

Design Of Low-Jitter 1-Ghz Phase-Locked Loops For Digital Clock Generation

An All‐digital Phase‐locked‐loop with a Robustness Enhanced Dual‐mode DCO

A 14ghz Cascade Differential-Capacitor-Based DCO with Resistor-Biased Buffer.

A CMOS digital-controlled oscillator for All-digital PLL frequency synthesizer

A 4224 MHz Low Jitter Phase-Locked Loop in 0.13-Μm CMOS Technology

A 3.44～5.25 GHz Digitally Controlled Oscillator with 182 dBc/Hz FOM for ADPLL Application

A Fully Synthesizable Fractional-N Digital Phase-Locked Loop with a Calibrated Dual-Referenced Interpolating Time-to-Digital Converter to Compensate for Process–Voltage–Temperature Variations

A low-phase-noise and wide-tuning-range LC digital controlled oscillator

A Low Spur, Low Jitter 10-Ghz Phase-Locked Loop in 0.13-Μm CMOS Technology

A Sub-mW Fractional-<inline-formula> &Lt;tex-Math Notation="latex">${n}$ &Lt;/tex-Math> &Lt;/inline-Formula> ADPLL with FOM of −246 Db for IoT Applications

A PVT tolerant 10 to 500 MHz all-digital phase-locked loop with coupled TDC and DCO

A 1.6&#x2013;880mhz Synthesizable ADPLL in 0.13um CMOS

A 2-Ghz 6.1-Ma Fully-Differential Cmos Phase-Locked Loop

Design of a wideband digitally controlled oscillator