Development of Automatic Monitoring System by MSComm in Visual Basic

liang xuedong,tian ricai

1999-01-01

Abstract:The article introduces an automatic monitoring system developed by Visual Basic and application of MSComm in Sevial communication programming.

What problem does this paper attempt to address?

Application of SMS in Long-Distance Real Time Area Protecting Monitor and Control System

QIAN Ya-li,ZHAO Guang-zhou

DOI: https://doi.org/10.3969/j.issn.1001-4551.2007.01.009

2007-01-01

Abstract:The three configurations of long-distance monitor and control area protecting system was introduced.The actualization of communication module was discoursed,the module was divided into two parts,one was the Modem and COM communication actualization,the other was the monitor layer and measure layer communication actualization.
Remote Data Acquisition System Based on SMS

程龙兴,胡协和,冯冬芹,黄文君

DOI: https://doi.org/10.3969/j.issn.1002-1841.2005.01.007

2005-01-01

Abstract:Remote data acquisition has been widely applied in many industry fields such as metallurgy and chemical, but many remote data acquisition system which are often been used have much shortcoming. Development of GSM communication technology makes Short Message begin to be applied on industrial control field. Short Message System has the merits of wide coverage, low cost, easy development and high reliability, so it is fit for remote data acquisition. Introduced the development of a remote data acquisition system based on SMS,including its structure and software designing. Now it has been applied in remote data acquisition of seweragegetting better effect.
Development of On-line Monitoring System of Thermal Parameters of Steam Turbine

刘东辉,王强,逯伟民

DOI: https://doi.org/10.3969/j.issn.1000-4416.2004.05.002

2004-01-01

Abstract:The thermal parameters monitoring system of industrial mini-steam turbine was developed, which was based on serial port communication. Three serial port communication methods were compared, the questions of using serial communication class in serial port communication program and testing database were discussed. Practical operation showed using communication class in Visual C++ is convenient to develop serial port communication program of monitoring system.
Development of remote pseudo-dynamic test platform

FAN Yun-lei,GUO Yu-rong,XIAO Yan

DOI: https://doi.org/10.3321/j.issn:1673-2049.2005.04.005

2005-01-01

Abstract:A system for distance monitoring and a seismic experiment controlling was introduced.This system was used to develop the method of a remote pseudo-dynamic test.A network communication platform NetSLab was needed to realize the remote control of the pseudo-dynamic test.Authors used Visual Basic developing the standard open-end single layer structural remote pseudo-dynamic test platform.The pseudo-dynamic test was remotely executed using this program.The application of the program was verified well by test results.
Study on the Real-Time Serial Communication Based on Windows

陈月斌,邬义杰,刘楚辉

DOI: https://doi.org/10.3969/j.issn.1001-2265.2003.12.003

2003-01-01

Abstract:Aiming at the real-time property of serial communication between upper and lower computer of distributed control system under Windows, based on the study on VxD work characteristic and the mechanism of serial communication, this paper describes the programming method of real-time serial communication,by using VtoolsD tool, which is good solution to the key technology of developing control system of precision machining.
Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

Xiao Hua Sun,Li Yan,Zhi Yong Zhang,Fu Shun Wang

DOI: https://doi.org/10.4028/www.scientific.net/amr.765-767.1943

2013-01-01

Advanced Materials Research

Abstract:By analyzing the current serial communication design used in a popular monitor system composed of PC, GOT and PLC, introduced a new design and implementation plan of serial communication based on Vb and MX software pagekage. This system could solve the problem of managing complex communication protocol in current application, and achieved the efficient, stable and reliable communication under simple attachment. The system could not only have not to consider complex communication protocol but also need not to set up the D8120 PLC, and MX Component with other application such as GX Developer could use com port at the same time, so debug conveniently and programming high efficiency. In the actual application, No matter the accuracy and stability of communication were to achieve achieve industrial control system requirements.
The Design and Realization of Remote Monitor and Control System Based on SMS

朱万贵,郑国君,顾新建

DOI: https://doi.org/10.3969/j.issn.1009-0134.2003.12.009

2003-01-01

Abstract:Remote monitor and control technology is a pop topic in modern manufacturing; Shortmessage is one of the up to date technology and it owns many merits. Such as: easydevelopment、low cost、free service、high reliability and so on. In this paper we discussthe theory and operation of SMS in GSM Net and do some research on the design andrealization of Remote Monitor and Control System base on SMS in manufacturing.
A Remote Monitoring System Based on GPRS in Visual Basic

GAO Yue-fang,LUO Fei

DOI: https://doi.org/10.3969/j.issn.1001-3695.2005.03.065

2005-01-01

Abstract:This paper introduces a remote monitoring system in Visual Basic 6.0, which is accomplished between the upper and lower computers with Winsock control by the network based on the technique of GPRS. Furthermore, it uses ADO and Data control to manage the historical data of practical water level.
Research of Monitored Control System Platform Software of Zhangzhou Water Factory

陈勇,仲卫涛,马龙华,梁军

DOI: https://doi.org/10.3969/j.issn.1000-3428.2001.07.060

2001-01-01

Abstract:This paper takes The NO.2 Water Factory of Zhangzhou for example, introduces a technology how to use Visual Basic to develop Windows program in monitor and control system. And described in detailed how to develop the realtime monitor and control software efficiently. This paper also include brief introduce of Automation, ActiveX control, and how to develop DLL program. ;;;;;
Development of Open CNC System Software

Qian Cao

2005-01-01

Abstract:This article mainly discusses the research and development of open CNC system software designed by Microsoft Visual C++, Especially discusses the Figure display ,G code disposal , software module of communication between motion control card and PC,communication software module between PC and Frequency Changer through RS485 .In additional,it provides the key program source codes.
Control Development of Parallel Port Communication by ActiveX

蒋双梅,高敦堂,都思丹

DOI: https://doi.org/10.3969/j.issn.1002-2279.2001.01.011

2001-01-01

Microprocessors

Abstract:A self--designed control of PC parallel port communication is introduced in this paper. Taking advantage of the MFC ActiveX technology,it is developed in Visual C++ and offset the scarcity of the control of PC parallel port communication. An example of frequency measurement shows the detail procedure and application of the control.
Study of Data Type Transformation in Serial Communication based on MSCOMM

LI WENTAO,HONG JIN,PANG YAFEI,ZHANG GUOWEI

DOI: https://doi.org/10.3969/j.issn.1008-0570.2008.01.050

2008-01-01

Abstract:The paper primarily discusses the problem of data type transformation in serial communication based on MSCOMM(Microsoft Communication Control)between PC and luminometer.Relationship of several special data structures in VC++6.0 in the process of communication has been researched, and several methods for sending and receiving data have been present. Finally, a corresponding application program in Visual C++6.0 is given.
Monitoring Software Design Based on Linux and LabWindows/CVI

WANG Bin,QIANG Sheng,ZHANG Xue,LI Wei

DOI: https://doi.org/10.3969/j.issn.1001-9944.2013.08.011

2013-01-01

Abstract:The traditional monitoring system was only applicable to a monitoring object,poor in network services and not high degree of intelligence.In order to solve these questions,a remote monitoring system based on i.MX53 as the core microcontroller was designed and realized.Linux was used as its operating system in the lower computer part,and LabWindows/CVI was used as development platform in the upper computer part.The two parts was communicated through the private network communication protocol.Several technologies were adopted such as inter-process communication under the Linux,MySQL database communication,multithread technology,and generating data report based on ActiveX etc.The system realizes the signal collection,message transmission,data storage and real-time display and other functions.Test results show that the system has imitation Win8 style of user interface,the average delay of 1.45 s in remote control,and alarm accuracy of 98.2%,so it has some practical value.
The Communication Method and Application of VB and RSView32 in Energy Supervision-control System

刘丙正,李中伟,纪宏岩,佟为明

DOI: https://doi.org/10.3969/j.issn.1002-6339.2008.02.020

2008-01-01

Abstract:For solving data share of configuration software and VB,by utilizing RSView32 and VB all complying DDE,this paper proposes a communication method of RSView32 and VB which has been applied to Chang Chun-Feng Yue company energy supervision-control system.Experiments indicate this method has advantages of reliability,real-time and easy realization.
Implementation of Computer Measure and Control System on Creep Testers

安子良,轩福贞,涂善东

DOI: https://doi.org/10.3969/j.issn.1002-1841.2008.03.014

2008-01-01

Abstract:The automated data acquisition and the control process were implemented in computer measure and control system on creep testers by DCS,and the communication between the upper subsystem and lower subsystem were realized by means of the serial interface.Based on the RS-485 communication protocol and address differentiate technique,multipoint data acquisition and temperature control of 4 creep testers were implemented by MSComm Active X of Visual Basic 6.0.The seamless integration among VB,Access and Excel were realized in the software system by the techniques of OLE and artificial code.Operating results indicate that the hardware and software of the system are high reliable and stable,and temperature auto control and testing data self-record of the creep tester are completely achieved.
Design of PLC Monitoring System Based on Virtual Instrument

Zhao Tiejun,Li Xiaoli

DOI: https://doi.org/10.3969/j.issn.1000-0755.2010.08.025

2010-01-01

Abstract:Through the combination of virtual instrument and PLC technique,the communications between the host computer and the PLC monitoring system is realized through the serial communication interface.The realization of serial communication in LabVIEW is described in detail,the communication software system is developed and the PLC monitoring system for virtual instrument is realized.
Long Distance Monitoring and Controlling System Based on AT89S52

XU HAIBO,LIAO CHUANSHU

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.20.026

2007-01-01

Abstract:At now, with the fast development of the applied technology of the Single-chip Microprocessor, the embedded systems with the core of Single-chip Microprocessor have been used in many fields. In this paper, there is a project of a Long Distance Auto-matic Monitoring and Controlling System for Alarm, which is constituted by the AT89S52 and the chip of the DTMF.
Research on measuring software system of material micro hardness based on serial communication

Li Ying,Gao Zhi

DOI: https://doi.org/10.3969/j.issn.1001-4160.2008.10.019

2008-01-01

Abstract:Serial communication is a key technology to realize the measurement of microhardness instrument by microcomputer system. This paper researches the principle of realizing real-time data collection and date treatment through serial communication between mi- crocomputer and microhardness instrument using Microsoft Communication Control under the platform of VC + +.As well as the process and methods of developing the system of date management using SQL Server and ADO accessing database technique of VC ++.The software has friendly interface and easy operation.
Implementation of Auto Monitoring and Short-Message-Service System via GSM Modem

Akilan Thangarajah,Buddhapala Wongkaew,Mongkol Ekpanyapong

DOI: https://doi.org/10.48550/arXiv.1501.01548

2015-01-07

Computer Vision and Pattern Recognition

Abstract:Auto-Monitoring and Short-Messaging-Service System is a real-time monitoring system for any critical operational environments. It detects an undesired event occurring in the environment, generates an alert with detailed message and sends it to the user to prevent hazards. This system employs a Friendly ARM as main controller while, sensors and terminals to interact with the real world. A GSM network is utilized to bridge the communication between monitoring system and user. This paper presents details of prototyping the system.
Software Design of the Online Noise Monitoring System

Hui JIN,Jie HE,Guang-chun GAO

DOI: https://doi.org/10.3969/j.issn.1003-6199.2005.03.036

2005-01-01

Abstract:The paper described the design method of the software of Online Noise Monitoring System.By using the Assembling and VB language,the software well implements the functions of ONMS with high ability of real-time controlling?convenient user interface?overall measuring data displaying and noise data managing. The result shows that the design methods are of great reference value for engineering software design.

Development of Automatic Monitoring System by MSComm in Visual Basic

Application of SMS in Long-Distance Real Time Area Protecting Monitor and Control System

Remote Data Acquisition System Based on SMS

Development of On-line Monitoring System of Thermal Parameters of Steam Turbine

Development of remote pseudo-dynamic test platform

Study on the Real-Time Serial Communication Based on Windows

Serial Communication Design of Industrial Control System Based on Visual Basic6.0 and MX Software Package

The Design and Realization of Remote Monitor and Control System Based on SMS

A Remote Monitoring System Based on GPRS in Visual Basic

Research of Monitored Control System Platform Software of Zhangzhou Water Factory

Development of Open CNC System Software

Control Development of Parallel Port Communication by ActiveX

Study of Data Type Transformation in Serial Communication based on MSCOMM

Monitoring Software Design Based on Linux and LabWindows/CVI

The Communication Method and Application of VB and RSView32 in Energy Supervision-control System

Implementation of Computer Measure and Control System on Creep Testers

Design of PLC Monitoring System Based on Virtual Instrument

Long Distance Monitoring and Controlling System Based on AT89S52

Research on measuring software system of material micro hardness based on serial communication

Implementation of Auto Monitoring and Short-Message-Service System via GSM Modem

Software Design of the Online Noise Monitoring System