Metamaterials for Perpetual Cooling at Large Scales

Xiang Zhang

DOI: https://doi.org/10.1126/science.aam8566

IF: 56.9

2017-01-01

Science

Abstract:A glass-polymer film can cool structures by radiating heat, even under direct sunlight

What problem does this paper attempt to address?

Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling

Yao Zhai,Yaoguang Ma,Sabrina N David,Dongliang Zhao,Runnan Lou,Gang Tan,Ronggui Yang,Xiaobo Yin,Sabrina N. David

DOI: https://doi.org/10.1126/science.aai7899

IF: 56.9

2017-03-10

Science

Abstract:The lazy way to keep cool in the sun Passive radiative cooling requires a material that radiates heat away while allowing solar radiation to pass through. Zhai et al. solve this riddle by constructing a metamaterial composed of a polymer layer embedded with microspheres, backed with a thin layer of silver (see the Perspective by Zhang). The result is an easy-to-manufacture material near the theoretical limit for daytime radiative cooling. The translucent and flexible film can be made in large quantities for a variety of energy technology applications. Science , this issue p. 1062 ; see also p. 1023

multidisciplinary sciences
Thermo‐Optically Designed Scalable Photonic Films with High Thermal Conductivity for Subambient and Above‐Ambient Radiative Cooling

Pengli Li,Ao Wang,Junjie Fan,Qi Kang,Pingkai Jiang,Hua Bao,Xingyi Huang

DOI: https://doi.org/10.1002/adfm.202109542

IF: 19

2021-10-20

Advanced Functional Materials

Abstract:Abstract Radiative cooling is a promising passive cooling technology that reflects sunlight and emits heat to deep space without any energy consumption. Current research mainly focuses on cooling non‐heat‐generating objects (e.g., water) to a deep subambient temperature under sunlight. Toward real‐world applications, however, cooling outdoor objects that generate tremendous heat and have a temperature higher than ambient (e.g., communication base stations and data centres) remains a challenge. Herein, a scalable photonic film is prepared by introducing 2D dielectric nanoplates with high backward scattering efficiency into a polymer using a simulation aided thermo‐optical design. It is demonstrated that the dielectric nanoplates can break the trade‐off between optical reflection and thermal dissipation of conventional radiative coolers. The photonic film exhibits superior solar reflectance (98%) and has a stronger heat dissipation ability compared to the matrix. It exhibits ≈4 °C subambient cooling performance under direct sunlight and ≈9 °C cooling performance at night. Moreover, it also demonstrates remarkable above‐ambient cooling performance by reducing the underlying heater temperature of ≈18 °C in comparison with traditional polymers under sunlight. The dielectric nanoplates reported here provide an innovative strategy for applications related to light management beyond subambient and above‐ambient radiative cooling.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A solution-processed radiative cooling glass

Xinpeng Zhao,Tangyuan Li,Hua Xie,He Liu,Lingzhe Wang,Yurui Qu,Stephanie C Li,Shufeng Liu,Alexandra H Brozena,Zongfu Yu,Jelena Srebric,Liangbing Hu,Stephanie C. Li,Alexandra H. Brozena

DOI: https://doi.org/10.1126/science.adi2224

IF: 56.9

2023-11-10

Science

Abstract:Passive daytime radiative cooling materials could reduce the energy needed for building cooling up to 60% by reflecting sunlight and emitting long-wave infrared (LWIR) radiation into the cold Universe (~3 kelvin). However, developing passive cooling structures that are both practical to manufacture and apply while also displaying long-term environmental stability is challenging. We developed a randomized photonic composite consisting of a microporous glass framework that features selective LWIR emission along with relatively high solar reflectance and aluminum oxide particles that strongly scatter sunlight and prevent densification of the porous structure during manufacturing. This microporous glass coating enables a temperature drop of ~3.5° and 4°C even under high-humidity conditions (up to 80%) during midday and nighttime, respectively. This radiative "cooling glass" coating maintains high solar reflectance even when exposed to harsh conditions, including water, ultraviolet radiation, soiling, and high temperatures.

multidisciplinary sciences
Radiative cooling and indoor light management enabled by a transparent and self-cleaning polymer-based metamaterial

Gan Huang,Ashok R. Yengannagari,Kishin Matsumori,Prit Patel,Anurag Datla,Karina Trindade,Enkhlen Amarsanaa,Tonghan Zhao,Uwe Köhler,Dmitry Busko,Bryce S. Richards

DOI: https://doi.org/10.1038/s41467-024-48150-2

IF: 16.6

2024-05-07

Nature Communications

Abstract:Abstract Transparent roofs and walls offer a compelling solution for harnessing natural light. However, traditional glass roofs and walls face challenges such as glare, privacy concerns, and overheating issues. In this study, we present a polymer-based micro-photonic multi-functional metamaterial. The metamaterial diffuses 73% of incident sunlight, creating a more comfortable and private indoor environment. The visible spectral transmittance of the metamaterial (95%) surpasses that of traditional glass (91%). Furthermore, the metamaterial is estimated to enhance photosynthesis efficiency by ~9% compared to glass roofs. With a high emissivity (~0.98) close to that of a mid-infrared black body, the metamaterial is estimated to have a cooling capacity of ~97 W/m 2 at ambient temperature. The metamaterial was about 6 °C cooler than the ambient temperature in humid Karlsruhe. The metamaterial exhibits superhydrophobic performance with a contact angle of 152°, significantly higher than that of glass (26°), thus potentially having excellent self-cleaning properties.

multidisciplinary sciences
A Structural Polymer for Highly Efficient All-Day Passive Radiative Cooling

Tong Wang,Yi Wu,Lan Shi,Xinhua Hu,Min Chen,Limin Wu

DOI: https://doi.org/10.1038/s41467-020-20646-7

IF: 16.6

2021-01-01

Nature Communications

Abstract:All-day passive radiative cooling has recently attracted tremendous interest by reflecting sunlight and radiating heat to the ultracold outer space. While some progress has been made, it still remains big challenge in fabricating highly efficient and low-cost radiative coolers for all-day and all-climates. Herein, we report a hierarchically structured polymethyl methacrylate (PMMA) film with a micropore array combined with random nanopores for highly efficient day- and nighttime passive radiative cooling. This hierarchically porous array PMMA film exhibits sufficiently high solar reflectance (0.95) and superior longwave infrared thermal emittance (0.98) and realizes subambient cooling of ~8.2 °C during the night and ~6.0 °C to ~8.9 °C during midday with an average cooling power of ~85 W/m 2 under solar intensity of ~900 W/m 2 , and promisingly ~5.5 °C even under solar intensity of ~930 W/m 2 and relative humidity of ~64% in hot and moist climate. The micropores and nanopores in the polymer film play crucial roles in enhancing the solar reflectance and thermal emittance.
Scalable and Flexible Multi‐Layer Prismatic Photonic Metamaterial Film for Efficient Daytime Radiative Cooling

Wangchang Li,Huanchen Zhan,Nengyan Huang,Yao Ying,Jing Yu,Jingwu Zheng,Liang Qiao,Juan Li,Shenglei Che

DOI: https://doi.org/10.1002/smtd.202301258

IF: 12.4

2023-12-28

Small Methods

Abstract:By designing periodic prismatic structures and porous structures on the surface of the radiative cooler, which can reflect almost all sunlight. Furthermore, the Fröhlich resonance of SiO2 at infrared wavelength, the film has a significant emissivity in the entire atmospheric transmission window (8−13 μm). This radiative cooler has great promise for practical applications in thermal management. To maintain a comfortable indoor living environment in low latitude or tropical regions, humans consume significant amounts of electrical energy in air conditioning, leading to substantial CO2 emissions. Passive daytime radiative cooling (PDRC) allows objects to cool down during the daytime without any energy consumption by dissipating heat through the atmospheric transparency window (8−13 μm) to outer space, which has garnered significant attention. However, the practical applications of common PDRC materials are hindered by their poor optical selectivity and high‐reflective silver backing. Additionally, the availability of artificial photon emitters with complex structures and excellent performance is also limited by their high cost. Herein, a novel multilayer prismatic photonic metamaterial film without any silver reflector, easily scalable and produced by a roll‐to‐roll method is demonstrated, which exhibits ≈96.4% sunlight reflectance (0.3−2.5 μm) and ≈97.2% emissivity in mid‐infrared (IR) (8−13 μm). At an average solar intensity of ≈920 W m−2, it is on average 6.8 °C below ambient temperature during the day and theoretically yields a radiative cooling power of 88.9 W m−2. Furthermore, the film exhibits excellent hydrophobicity, superior flexibility, and robust mechanical strength, providing an attractive and viable pathway for practical applications addressing the pressing challenges of climate and energy issues.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Flexible Polymer Photonic Films with Embedded Microvoids for High-Performance Passive Daytime Radiative Cooling

Lei Zhou,Jintao Zhao,Haoyun Huang,Feng Nan,Guanghong Zhou,Qingdong Ou

DOI: https://doi.org/10.1021/acsphotonics.1c01149

IF: 7

2021-10-20

ACS Photonics

Abstract:Passive radiative cooling, a promising strategy for energy savings and sustainability, enables cooling of the ambient temperature by synchronously reflecting sunlight and dissipating heat to the ultracold outer space through the atmospheric transparency window. While designed photonic structures have shown intriguing passive radiative cooling performance, the implementation of such photonic radiators remains challenging due to complex nanoscale lithography/synthesis and rigidity. Here, we experimentally demonstrate a simple and versatile approach of fabricating flexible polydimethylsiloxane radiator thin films with built-in three-dimensional microvoid (inverse-opal-like) arrays for highly efficient daytime radiative cooling. The microvoid-embedded polymer radiator film with tailored spectral responses shows an optimized total reflectivity of ∼93.4% in the sunlight region and a strong infrared emissivity of ∼94.6% within the atmospheric window, respectively. Through such remarkable solar reflection and infrared thermal radiation, the structural polymer radiator achieves subambient cooling of ∼9.8 °C during the night and ∼5.8 °C under direct sunlight in a nonvacuum setup. The three-dimensionally embedded microvoid arrays in our engineered photonic polymer films efficiently backscatter the incident solar radiation and simultaneously enhance the absorption/emissivity in mid-infrared wavelengths, leading to continuous subambient all-day cooling. Our findings provide an effective pathway toward a low-cost, high-performance flexible photonic radiative cooler for passive daytime cooling.

physics, condensed matter,optics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
Free-standing, colored, polymer film with composite opal photonic crystal structure for efficient passive daytime radiative cooling

Jintao Zhao,Feng Nan,Lei Zhou,Haoyun Huang,Guanghong Zhou,Yu-fu Zhu,Qingdong Ou

DOI: https://doi.org/10.1016/j.solmat.2022.112136

IF: 6.9

2023-03-01

Solar Energy Materials and Solar Cells

Abstract:The daytime radiative coolers offer a sustainable way to passively cool objects under direct sun exposure with the merits of zero energy consumption and zero pollutant generation. However, the ivory or silvery glare in the color of these coolers consequently restricts their practical applications, particularly for functional and aesthetic situations. Here, we present a free-standing, colored, polymer film with composite opal photonic crystal structure that simultaneously achieves color and efficient passive daytime radiative cooling. The polymer optical film composed of flexible inexpensive polydimethylsiloxane (PDMS) thin film with embedded three-dimensional (3D), inverse-opal-like TiO2 skeleton nanostructures behaves as a composite opal photonic crystal structure within the visible regime for reflecting specific visible light to generate desired full colorization based on Bragg diffractions. Meanwhile, the embedded TiO2 skeleton nanostructures can also efficiently scatter the rest of unwanted incoming visible light, resulting in high total reflectivity in the sunlight band. Importantly, all developed colored optical films (e.g., red, green, and blue) exhibit strong infrared emissivity both within the second (8–13 μm) and the third (16–26 μm) atmospheric window regions. Consequently, all colored optical films could realize desired subambient temperature drop, and achieve maximum subambient cooling of ∼4.1 °C under strong solar radiation of 854 W m−2. The present work provides a conceptually generic route for both coloration and efficient radiative cooling in a simple and scalable way.

materials science, multidisciplinary,physics, applied,energy & fuels
Beam-controlled spectral-selective architecture with planar polydimethylsiloxane/metal-films for all-day radiative cooling

Lyu Zhou,Haomin Song,Jianwei Liang,Matthew Singer,Ming Zhou,Edgars Stegenburgs,Nan Zhang,Chen Xu,Tien Khee Ng,Zongfu Yu,Boon Ooi,Qiaoqiang Gan

DOI: https://doi.org/10.48550/arXiv.1810.09240

2018-09-28

Abstract:Radiative cooling is a passive cooling strategy with zero consumption of electricity. Although this technology can work well during optimal atmospheric conditions at nighttime, it is essential to achieve efficient radiative cooling during daytime when peak cooling demand actually occurs. In this article, we report an inexpensive planar polydimethylsiloxane (PDMS)/metal thermal emitter, i.e., a thin film structure fabricated using fast solution coating process that is scalable for large area manufacturing. By manipulating the beaming effect of the thermal radiation, temperature reduction of 9.5 °C and 11.0 °C were demonstrated in the laboratory and out-door environment, respectively. In addition, a spectral-selective solar shelter architecture was designed and implemented to suppress the solar input during the daytime. Due to the enhanced directionality of the thermal emission, the dependence of the radiative cooling performance on the surrounding environment was minimized. Out-door experiments were performed in Buffalo NY, realizing continuous all-day radiative cooling with an average power of ~120 W/m2 on a typical clear sunny day at Northern United States latitudes. This practical passive cooling strategy that cools without any electricity input could have a significant impact on global energy consumption.

Applied Physics,Optics
Passive radiative cooling of solar cells by low-cost and scalable metamaterials: physical simulation and efficiency limits

Matteo Cagnoni,Alberto Tibaldi,Pietro Testa,Federica Cappelluti,Jorge Sánchez Dolado

DOI: https://doi.org/10.1117/12.2607489

2022-03-04

Abstract:Radiative cooling is an attractive concept for future sustainable energy strategies, as it might enable passive cooling of buildings and photovoltaic systems, hence facilitating energy savings by boosting performance and lifespan. The key idea is the adoption of materials that strongly emit thermal radiation in the atmosphere transparency window (wavelengths between 8 and 13 m) as cooling layers. Significant progress in the field of metamaterials has enabled the realization of dielectric photonic structures with properties matching radiative cooling requirements and capable of going below ambient temperature. However, these structures are rather expensive and appear unsuitable for today’s large-scale manufacturing. In the present work, we have studied radiative cooling applied to Shockley-Queisser solar cells by exploring alternative materials, namely cementitious phases, which exhibit the required properties while being low-cost and scalable. We have determined their emission behavior by electromagnetic simulations and estimated the corresponding solar cell operating temperature by means of a detailed-balance model. The results have been benchmarked against the current state-of-the-art and hint at the possible realization of a new class of radiative coolers based on cheap and scalable cementitious materials.
Bilayer porous polymer for efficient passive building cooling

Chunzao Feng,Peihua Yang,Huidong Liu,Mingran Mao,Yipu Liu,Tong Xue,Jia Fu,Ting Cheng,Xuejiao Hu,Hong Jin Fan,Kang Liu

DOI: https://doi.org/10.1016/j.nanoen.2021.105971

IF: 17.6

2021-07-01

Nano Energy

Abstract:<p>Passive building cooling without any electricity input are highly desirable in pursuing low energy consumption and environment protection. However, widespread adoption of existing techniques is restrained by the complex system design or low cooling power. Herein, we propose an efficient passive cooling approach with a bilayer porous polymer film, which comprises a hygroscopic hydrogel and a hydrophobic top layer with hierarchical pores. The hydrogel implements evaporative cooling in the daytime and regenerates itself at night. The top layer protects and radiatively cools the hydrogel, which enhances the cooling power during day and helps the hydrogel regeneration at night. With the synergistic effect, the bilayer film attains a remarkable sub-ambient temperature drops of ~7 °C and an effective cooling power of ~150 W·m<sup>−2</sup> under direct sunlight, showing great potential for low-cost, efficient and scalable passive building cooling.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
All-day effective radiative cooling by optically selective and thermally insulating mesoporous materials

Maoquan Huang,Xiyu Yu,Jiacheng Wan,Mu Du,Xinyu Wang,Qie Sun,G.H. Tang

DOI: https://doi.org/10.1016/j.solener.2022.02.015

IF: 7.188

2022-03-01

Solar Energy

Abstract:Due to serious solar absorption and poor thermal insulation on the cold side, current daytime radiative cooling falls far short of the theoretical potential. The mesoporous film can be used for both thermal insulation and optical selection. In this study, the radiative properties of infrared transparent mesoporous materials are investigated. The Diffusion Limited Cluster Aggregation algorithm is employed to reproduce the micro-structures of the mesoporous materials. The structure-dependent normal hemispherical transmittance is predicted by the combination of discrete dipole approximation and Monte Carlo method. The effects of material type and structure characteristics (particle size, volume fraction and cover thickness) on the infrared transmittance and all-day radiative cooling performance are quantified. The results show that the polyethylene (PE) aerogel achieves the best thermal insulation performance and good spectral selectivity. It can work as a thermally insulating barrier and an infrared transparent window for the radiative cooling surface. By integrating with PE aerogel, the radiative cooling surface can enable the passive cooling up to 13 K below the ambient temperature during the day and 15 K below the ambient temperature during the night at a wind speed of 2.8 m/s. This work provides an optimal design of optically selective and thermally insulating mesoporous materials in passive all-day radiative cooling applications.

energy & fuels
Transparent, Anti-Corrosion and High Broadband Emission Coating for Zero Energy Consumption Cooling Technology

Yiteng Tu,Xinyu Tan,Guiguang Qi,Xiongbo Yang,Xiqiao Ouyang,Wensheng Yan,Weiwei Hu,Jialin Geng,Ronggui Yang

DOI: https://doi.org/10.1016/j.mtphys.2023.101070

IF: 11.021

2023-01-01

Materials Today Physics

Abstract:Daytime radiative cooling as passive cooling technology with zero consumption of energy and zero emission of green gas, has recently attracted tremendous interest by reflecting sunlight and radiating heat to the ultracold outer space. Some progress has been made, while it still remains big challenge in transparent and radiation cooling double characteristics radiative coolers. Here, we propose a spectrally selective coating based on tri-cyclodecane dimethanol diacrylate (DCPDA) monomer. Acid-and basic-proof coating are fabricated with simple and scalable blade and spray coating methods at room temperature. The coated glass displays a transmissivity around 90% in visible wavelengths from 400 nm to 800 nm and a thermal emissivity above 95% over atmo-spheric window (8-13 mu m). In clear summer in Yichang city with no wind, outdoor cooling tests demonstrated that realizes sub-ambient cooling of 18.6 degrees C during midday when applied on the aluminum (Al) sheets substrate. Featured with scalability, durability, and superior cooling performance make the film shows promising potentials for transparent radiative cooling applications.
Macro-Nanoporous Film with Cauliflower-Shaped Fibers for Highly Efficient Passive Daytime Radiative Cooling

Limin Wei,Na Li,Huijian Liu,Chenxu Sun,Amin Chen,Ruixue Yang,Yanmin Qin,Haifeng Bao

DOI: https://doi.org/10.1021/acsami.4c15294

IF: 9.5

2024-10-04

ACS Applied Materials & Interfaces

Abstract:Passive daytime radiative cooling (PDRC) is a simple and effective cooling approach that does not consume any extra energy just by highly reflecting shortwave sunlight and highly radiating infrared heat through the atmospheric windows. In recent years, the application of photonic coolers and metamaterials for PDRC has been studied. However, they usually have complex processes and high precision requirements, which seriously limit large-scale fabrication. In this paper, a high-performance...

materials science, multidisciplinary,nanoscience & nanotechnology
A Self-Adaptive Film for Passive Radiative Cooling and Solar Heating Regulation

Xue Mei,Tong Wang,Min Chen,Limin Wu

DOI: https://doi.org/10.1039/d2ta01291j

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:We designed a self-adaptive film with a sandwich structure based on a thermochromic poly(N-isopropylacrylamide) hydrogel and polyvinylidene fluoride film, realizing highly efficient sub-ambient radiative cooling and above-ambient solar heating.
Super-Large-Scale Hierarchically Porous Films Based on Self-Assembled Eye-Like Air Pores for High-Performance Daytime Radiative Cooling.

Qing Tian,Xitao Tu,Liu Yang,Haibo Liu,Yubo Zhou,Yuxin Xing,Zhe Chen,Shanhui Fan,Julian Evans,Sailing He

DOI: https://doi.org/10.1002/smll.202205091

IF: 13.3

2022-01-01

Small

Abstract:Metal-free polymer daytime radiative cooling coatings with hierarchical eye-like air pores are proposed and fabricated with a super-large-scale film-stretching method. The hierarchically porous film (HPF) can be further coated with polymethyl methacrylate (PMMA) micro-hemispheres, forming coated HPF (cHPF), which do not dramatically change the optical or thermal properties. The cHPF is slightly better with a lower solar absorptivity (2.4%) and a higher thermal emissivity over the atmospheric transparency window (90.1%). The low solar absorptivity is due to the strong scattering of the hierarchical eye-like air pores, while the molecular vibrations and the focusing effect of the PMMA micro-hemispheres contribute to the high emissivity. An average mid-day temperature reduction of 7.92 degrees C is achieved relative to the air temperature, and the average cooling power reaches 116.0 W m(-2), which are much better than the cooling performances of the commercial cooling cushion. During the day, the cHPF-covered simulated building is up to 6.47 and 4.84 degrees C cooler than the ambient and the white painted counterpart, respectively. The film is durable and resistant to chemical etching, and very promising to use globally, especially in warm and tropical regions.
Butterfly wing-inspired microstructured film with high reflectivity for efficient passive radiative cooling

Nuo Xu,Jiacheng Wang,Yubo Cui,Shenghao Ren,Jiangbin Deng,Qianzhi Gou,Zhaoyu Chen,Kaixin Wang,Yang Geng,Jiaxi Cui,Meng Li

DOI: https://doi.org/10.1016/j.renene.2024.120732

IF: 8.7

2024-06-07

Renewable Energy

Abstract:Radiative cooling is a passive cooling technology that radiates heat to outer space without any energy input thus such technology is of great significance for alleviating environmental pollution and consumption of energy. However, achieving cooling during the daytime normally requires a series of complex structural designs that are economically inefficient and unscalable fabrication process. In this work, inspired by the nanostructure of Pieris rapae butterfly wings, we fabricate a double-layered polymeric film with a bead-like structure which can scatters incident light intensely for passive radiative cooling. Through optical characterization, it was demonstrated that the film can provide a high solar reflectivity of ∼92.4 % and a high atmospheric window emissivity of ∼93.2 %. In field tests, the film can achieve a maximum temperature drop of 6.5 °C and an average temperature drop of 3.8 °C under direct sunlight, and theoretically producing an effective cooling power of 123.8 W m −2 . The as-prepared film could be fabricated through a low-cost template process, and our work presents a new approach to the application of radiative cooling technology in the field of building cooling.

energy & fuels,green & sustainable science & technology
Phase-transition materials derived photonic metamaterials for passively dynamic solar thermal and coldness harvesting

Hengliang Wu,Dan Shang,Huan Zhang,Lifeng Zhi,Shaolong Sun,Shiming Cui,Chaoqun Yan

DOI: https://doi.org/10.1016/j.heliyon.2024.e23986

IF: 3.776

2024-01-08

Heliyon

Abstract:The rising need for energy to actively heat and cool human-made structures is contributing to the growing energy crisis and intensifying global warming. Consequently, there's a pressing need for a sustainable approach to temperature management that minimizes energy consumption and carbon emissions. The substantial temperature differences between the Sun (approximately 5800 K), Earth (around 300 K), and outer space (about 3 K) offer a unique opportunity for passive thermal regulation on a global scale. Recent research indicates the possibility of addressing this issue through various low-carbon, passive technologies such as solar heating and radiative cooling. However, their practical application is often limited to certain seasons and climatic regions due to their static and single-function nature in managing temperature. In this context, we introduce a concept of phase-change metamaterials that provide passive, dynamic, and adjustable radiative thermal control, suitable for widespread engineering applications. Our designed metafilm comprises a Polydimethylsiloxane (PDMS) layer infused with vanadium dioxide (VO2) nanoparticles, backed by a layer of broadband-reflective silver (Ag). This metafilm exhibits a self-adjusting solar absorptance, shifting from 0.96 to 0.25 at a pivotal temperature while maintaining a nearly constant thermal emittance. We can finely tune the metafilm's optical characteristics by altering the VO2 nanoparticle concentration and PDMS layer thickness. To demonstrate its efficacy in solar thermal management and radiative cooling, we simulate its temperature behavior under various weather conditions.
[The effect of bestatin on the lymphocyte functions of cancer patients (author's transl)].

T. Noma,J. Yata,K. Hoshi,T. Ishii

1981-06-20

Abstract:
Gastric Uptake of Tc‐99m MDP in a Child Treated with Isotretinoin

Arie Franco,W. R. Hampton,B. Greenspan,A. Holm,R. O'mara

DOI: https://doi.org/10.1097/00003072-199306000-00011

IF: 10.6

1993-06-01

Clinical Nuclear Medicine

Abstract:The side effects of prolonged isotretinoin therapy include progressive calcification of ligamentous and tendon insertions, premature fusion of epiphyses, and modeling abnormalities of long bones. Increased calcification of gastric mucosa has been reported only in animal studies, but not in humans. A case of a child who was treated with isotretinoin for 26 months for a dermatologic disorder and who showed abnormal gastric uptake of 99m-Tc MDP on a bone scan is reported.

Metamaterials for Perpetual Cooling at Large Scales

Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling

Thermo‐Optically Designed Scalable Photonic Films with High Thermal Conductivity for Subambient and Above‐Ambient Radiative Cooling

A solution-processed radiative cooling glass

Radiative cooling and indoor light management enabled by a transparent and self-cleaning polymer-based metamaterial

A Structural Polymer for Highly Efficient All-Day Passive Radiative Cooling

Scalable and Flexible Multi‐Layer Prismatic Photonic Metamaterial Film for Efficient Daytime Radiative Cooling

Flexible Polymer Photonic Films with Embedded Microvoids for High-Performance Passive Daytime Radiative Cooling

Free-standing, colored, polymer film with composite opal photonic crystal structure for efficient passive daytime radiative cooling

Beam-controlled spectral-selective architecture with planar polydimethylsiloxane/metal-films for all-day radiative cooling

Passive radiative cooling of solar cells by low-cost and scalable metamaterials: physical simulation and efficiency limits

Bilayer porous polymer for efficient passive building cooling

All-day effective radiative cooling by optically selective and thermally insulating mesoporous materials

Transparent, Anti-Corrosion and High Broadband Emission Coating for Zero Energy Consumption Cooling Technology

Macro-Nanoporous Film with Cauliflower-Shaped Fibers for Highly Efficient Passive Daytime Radiative Cooling

A Self-Adaptive Film for Passive Radiative Cooling and Solar Heating Regulation

Super-Large-Scale Hierarchically Porous Films Based on Self-Assembled Eye-Like Air Pores for High-Performance Daytime Radiative Cooling.

Butterfly wing-inspired microstructured film with high reflectivity for efficient passive radiative cooling

Phase-transition materials derived photonic metamaterials for passively dynamic solar thermal and coldness harvesting

[The effect of bestatin on the lymphocyte functions of cancer patients (author's transl)].

Gastric Uptake of Tc‐99m MDP in a Child Treated with Isotretinoin