Abstract:The regulation of temperature at the macro and microscale is a major energy-consuming process of humankind. Modern cooling systems account for 15% of the global energy consumption and are responsible for 10% of greenhouse gas emissions. Due to global warming, a ten-fold growth in the demand of cooling technologies is expected in the next 30 years, thus linking global warming and cooling needs through a worrying negative feedback loop. Here, we propose an inexpensive solution to this global challenge based on a single-layer of silica microspheres self-assembled on a soda-lime glass substrate. This two-dimensional (2D) crystal acts as a visibly translucent thermal blackbody for above-ambient daytime radiative cooling and can be used to passively improve the thermal performance of devices that undergo critical heating during operation. The temperature of a crystalline silicon wafer was found to be 14K lower during daytime when covered with our thermal emitter, reaching an average temperature difference of 19K when the structure was backed with a silver layer. In comparison, the soda-lime glass used as a reference in our measurements lowered the temperature of the silicon wafer by just 5 K. The cooling power density of this rather simple radiative cooler under direct sunlight was found to be up to 350 W/m2 when applied to hot surfaces with relative temperatures of 50 K above the ambient. This is crucial to radiatively cool down electronic devices, such as solar cells, where an increase in temperature has drastic effects on performance. Our 2D thermo-functional material includes a single layer of spheres emitting long-wave radiation through the infrared atmospheric window and over a broad wavelength ange, thus providing effective radiative cooling using the outer space as a heat sink at 3 K.

Passive radiative cooling of solar cells by low-cost and scalable metamaterials: physical simulation and efficiency limits

Effective, Angle-Independent Radiative Cooler Based on One-Dimensional Photonic Crystal

Mirroring Solar Radiation Emitting Heat Toward the Universe: Design, Production, and Preliminary Testing of a Metamaterial Based Daytime Passive Radiative Cooler

Visibly Clear Radiative Cooling Metamaterials for Enhanced Thermal Management in Solar Cells and Windows

Radiative cooling for passive thermal management towards sustainable carbon neutrality

Thermo‐Optically Designed Scalable Photonic Films with High Thermal Conductivity for Subambient and Above‐Ambient Radiative Cooling

Passive Cooling of Solar Cells with a Comprehensive Photonic Approach.

Phase-transition materials derived photonic metamaterials for passively dynamic solar thermal and coldness harvesting

Multilayered SiO2/Si3N4 photonic emitter to achieve high-performance all-day radiative cooling

Detailed-balance assessment of radiative cooling for multi-junction solar cells under unconcentrated and low-concentrated light

A self-assembled two-dimensional thermo-functional material for radiative cooling

Passive radiative cooling impact on commercial crystalline silicon-based photovoltaics

High-performance subambient radiative cooling enabled by optically selective and thermally insulating polyethylene aerogel

Photonics Empowered Passive Radiative Cooling

Beam-controlled spectral-selective architecture with planar polydimethylsiloxane/metal-films for all-day radiative cooling

Scalable Flexible Hybrid Membranes with Photonic Structures for Daytime Radiative Cooling

Bioinspired "Aerogel Grating" with Metasurfaces for Durable Daytime Radiative Cooling for Year-round Energy Savings

Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling

Emerging materials and engineering strategies for performance advance of radiative sky cooling technology

Highly emissive, selective and omnidirectional thermal emitters mediated by machine learning for ultrahigh performance passive radiative cooling

Designer SiO2 Metasurfaces for Efficient Passive Radiative Cooling