Abstract:In this paper, the depth and length of lateral subsurface cracks were gauged using laser-generated Rayleigh waves in the frequency domain. First, the frequency domain characteristics of reflected and transmitted Rayleigh waves after a laser-generated Rayleigh wave interacts with lateral subsurface cracks are investigated based on the finite element method (FEM). The simulation results reveal that there is a certain relationship between the center frequency of reflected and transmitted Rayleigh waves and crack size. The center frequency of the reflected Rayleigh wave decreases with increasing crack length but is independent of depth. When the crack length remains unchanged, the center frequency of the transmitted Rayleigh wave increases with increasing crack depth. Then, the quantitative relationships between the ratio of the crack length to the incident Rayleigh wavelength and the ratio of the reflected Rayleigh wave frequency to the incident Rayleigh wave frequency, the ratio of the crack depth to the incident Rayleigh wavelength and the ratio of the transmitted Rayleigh wave frequency to the incident Rayleigh wave frequency were obtained via multiple function fitting, and a method for the quantitative detection of the lateral subsurface crack depth and length was proposed. Finally, experimental and simulated data were used to validate the proposed relationships, and the results showed that the relative error of the measured crack length did not exceed 7.19% and that the relative error of the measured crack depth did not exceed 14.82%. The results show that the method has good application prospects for the quantitative measurement of lateral subsurface crack depth and length.

Metal Crack Propagation Monitoring by Photoluminescence Enhancement of Quantum Dots.

Real-time Monitoring of Crack Propagation in Metals Based on Quantum Dots

A Novel Way of Real-time Crack Monitoring Based on Quantum Dots

Monitoring of Micro Fatigue Crack in Ceramics Based on Quantum Dots Photoluminescence

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

Metal Structural Integrity Monitoring Via Optical Response of Quantum Dots-Epoxy Resin

In-situ observation of crack propagation through the nucleation of nanoscale voids in ultra-thin, freestanding Ag films

A Method for Nondestructive Evaluation of Crack Depth on Metal Surface by Microwaves

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Carbon Dots As A Sensitive Fluorescence Probe For Rock Cracks Detection

Mechanoresponsive luminogen (MRL)-based real-time and visible detection method for biaxial fatigue crack propagation

Strain Monitoring via Self-Assembled Quantum Dots

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Monitoring the Crack Growth by Measurement of Diffracted Lamb Waves

A Cross-Scanning Crack Damage Quantitative Monitoring and Imaging Method

In-Situ Strain Gauge: Based On Photoluminescence Of Quantum Dots

In Situ SEM Observation of Microscale Strain Fields Around a Crack Tip in Polycrystalline Molybdenum

Experimental Investigation of Subsurface Damage Depth of Lapped Optics by Fluorescent Method

Deformation Fields Measurement of Crack Tip under High-Frequency Resonant Loading Using a Novel Hybrid Image Processing Method