Abstract:Hindered casing strings are often encountered in unconventional oil and gas exploration during the casing running process. This not only increases the operating costs and time but can also lead to downhole accidents and even abandonment in serious cases. Due to various assumptions, the calculation results of the existing soft models and hard models are different, which causes confusion for field operators when taking friction reduction measures. Moreover, a lowering force is often applied to assist hindered casing string running in a drilling field. However, its application is mainly based on work experience and lacks mechanistic analysis and theoretical guidance. Thus, in this study, a simulation model for the analysis of casing string tripability in a directional well was established and the model was combined with the continuous beam-column theory and buckling theory. The model was used to study how various factors including the friction coefficient, drilling fluid density, and casing diameter could affect the lowering force required when a casing string was hindered by buckling. The results showed that the maximum lowering force and the maximum effective lowering force decreased with the increase in the friction coefficient and the performance of the drilling fluid could be adjusted rapidly, which would be beneficial for ensuring that the casing string could be tripped smoothly by applying a lowering force. The increase in the drilling fluid density caused the maximum lowering force and the maximum effective lowering force to decrease, which was not conducive to hindered casing string running. The larger the casing diameter was, the greater the maximum lowering force and the maximum effective lowering force were. It was more convenient to apply a lowering force for a casing with a large diameter. In addition, the improved model could identify whether the casing string was in contact with the upper or lower borehole walls. Through finite element method verification, the prediction was in line with the actual casing running operation and the improved model has the smallest prediction error, i.e., 6.58%, compared with the existing models. Therefore, the improved model might provide necessary theoretical guidance for casing running operations in directional wells.

ANALYSIS ON LAB AND ON-SITE TESTING RESULTS FOR UNBENDING DRILL COLLAR

DRILLING FLUID TECHNIQUE OF GAS DRILLING TRANSLATION INTO CONVENTIONAL DRILLING

Application of Gap Element to Nonlinear Mechanics Analysis of Drillstring

TESTING STUDY AND ANALYSIS ON SOIL DISTURBANCE INDUCED BY PIPE JACKING CONSTRUCTION

Study on lateral vibration characteristics of BHA with double-span drill collar

Cause Analysis of Tubing Flattening in an Oil Well

"Unbending Drill Collar" What Went Wrong?

Analysis of secondary makeup characteristics of drill collar joint and prediction of downhole equivalent impact torque of Well SDTK1

Numerical modeling and the ultimate bending experiment of the directional drill pipes bending at the dog-leg of the multi-branch well

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

ANALYSIS OF STABILITY FAILURE FOR PIPELINE DURING LONG DISTANCE PIPE JACKING

3D Mechanical Analysis of Subsea Manifold Installation by Drill Pipe in Deep Water

Laboratory study on casing deformation during multistage horizontal well fracturing in shale gas development and strain based casing design

Reliability Analysis of Dynamic Sealing Performance in the Radial Hydraulic Drilling Technique

Buckling and dynamic analysis of drill string system in horizontal wells

Investigation on axial-lateral-torsion nonlinear coupling vibration model and stick-slip characteristics of drilling string in ultra-HPHT curved wells

Nonlinear Buckling Analysis and Ultimate Extended Capacity Research of Downhole Pipe Strings in Ultra-Deep Horizontal Wells

DOUBLE-NONLINEAR FINITE ELEMENT ANALYSIS OF BOTTOM HOLE ASSEMBLY

Design of Flexible Drill Pipe with Ultra-Short Radius in Sidetrack Horizontal Well Based on the Snake Bone Directional Variability

Tripability Analysis of Casing Strings in Directional Wells Using the Continuous Beam-Column and Buckling Theory