Abstract:Magnetic invisible cloaking has been previously demonstrated but only limited to objects with rotational geometries either in spherical or cylindrical shapes, for which the classic analytical bilayer scheme could be strictly applied to design the hiding coat. In this work, we show that a quasi-static cloaking effect could be achieved for irregular objects, e.g., metals with sharp edges, using a numerical optimization scheme. In the quasi-static limit, it is unambiguously proved that the disturbance of the irregular geometries could be well compensated by the inhomogeneous distribution of the soft ferromagnetic (FM) layer either in permeability values or in shapes under the framework of a bilayer cloak. An FM mesh coat with a constant thickness of 0.5 mm was successfully engineered to meet the specific requirements. Experimentally, good cloaking performance with a field disturbance of less than 0.5% has been achieved for a 2 × 2 × 5 cm3 brass bar in a wide frequency range from ∼10 to 250 kHz. A commercial metal scanner was also applied to verify the practical potential. The general strategy to hide almost arbitrary objects was discussed in the end. In principle, the numerical conformal coat engineered by the composite material proposed here could be broadly extended for objects with various geometries.

Arbitrarily Shaped Thermal Cloaks with Non-Uniform Profiles in Homogeneous Media Configurations.

ITR-free Thermal Cloak

Thermal Cloak-Concentrator

Full‐Parameter Omnidirectional Thermal Metadevices of Anisotropic Geometry

A Multi-Cloak Bifunctional Device

Ultrathin Conformal Magnetic Invisible Cloak for Irregular Objects.

Cloak of arbitrary shape

Design of diamond-shaped transient thermal cloaks with homogeneous isotropic materials

A Bifunctional Cloak Using Transformation Media

Three-dimensional polyhedral invisible cloak consisting of homogeneous materials

Unconventional Thermal Cloak Hiding An Object Outside The Cloak

Analytical design of conformally invisible cloaks for arbitrarily shaped objects

A Unidirectional TM-Wave Cloak with Full Parameters

Design of Transparent Cloaks with Arbitrarily Inner and Outer Boundaries

Optimization Method for Practical Design of Planar Arbitrary-Geometry Thermal Cloaks Using Natural Materials

Multithermally invisible cloaks and sensors with complex shapes

Omnithermal Metamaterials Switchable Between Transparency and Cloaking

Designing Conformal Cloaks by Manipulating Structures Directly in the Physical Space

Camouflage Thermotics: A Cavity Without Disturbing Heat Signatures Outside

Transformation Heat Transfer and Thermo-Hydrodynamic Cloaks for Creeping Flows: Manipulating Heat Fluxes and Fluid Flows Simultaneously

Arbitrary-shape transformation multiphysics cloak by topology optimization