Abstract:Diagram of hydrogen bond interactions between Pebax® 1657 and SSMMP‐20%‐[bmim][Tf2N] filler. Mixed matrix membranes (MMMs) have been proposed as a solution to surmount Robeson's trade‐off curves and have demonstrated efficacy in gas separation processes, particularly for CO2 capture. In this study, MMMs based on Pebax®1657 were obtained utilizing synthetic silico‐metallic mineral particles (SSMMP) functionalized with ionic liquids (ILs). The objective was to attain enhanced CO2 separation performance, thereby showcasing the potential to mitigate the environmental repercussions of industrial processes that entail greenhouse gas emissions. For membrane production, an ethanol/water mixture was used as solvent, with the SSMMP/IL content varying from 0.5 to 20% by weight of the polymer. The primary aim of this study was to assess the effect of filler addition on permeability and selectivity for CO2, CH4, and N2. Comprehensive analyses, including SEM, FTIR, TGA, DSC, and DMA were conducted to evaluate the properties of the produced membranes. Gas permeability and ideal selectivity were measured at 25°C and different pressures, ranging from 1 to 7 bar. Characterization results demonstrate that the glass transition temperature (Tg) of MMMs increased compared to pure Pebax®1657, indicating that the addition of SSMMP/IL reduces the flexibility of the PEO chains, forming a rigid interface at the polymer/filler, which may enhance selectivity. This effect, corroborated by gas permeation, was observed for both CO2/N2 and CO2/CH4. For CO2/N2, the highest selectivity was achieved at lower filler concentrations, gradually decreasing as the filler load increased. MMM‐0.5 wt% achieved the highest selectivity of 91.96. The membrane CO2 permeability rose with an elevated filler content, rising from 84.21 for pure Pebax®1657 to 192.17 Barrer for MMM‐20 wt% at 4 bar. The permeability results were influenced by the gas diffusion coefficients of the MMMs, which increased with increasing SSMMP/IL content. The effect of feed pressure on MMM‐5 wt% was also assessed, revealing that CO2 permeability increased with increasing pressure, from 126.72 Barrer at 1 bar to 165.56 Barrer at 7 bar. This work showcased the viability of MMMs incorporating SSMMP/IL for industrial use, as they displayed separation capabilities that exceeded the 2008 Robeson upper bound. Highlights Mixed matrix membranes based on Pebax®1657 and SSMMP‐20%‐[bmim][Tf2N] were prepared. CO2 permeability of the MMMs was increased by 128% and CO2/N2 selectivity by 83%. Higher CO2 pressures increase MMMs permeability. The obtained MMMs have separation performances above the Robeson upper Bound.

Facilitating CO2 Transport Across Mixed Matrix Membranes Containing Multifunctional Nanocapsules

Constructing Low-Resistance and High-Selectivity Transport Multi-Channels in Mixed Matrix Membranes for Efficient CO2 Separation

Constructing multi-dimensional transport pathways by mixed-dimensional fillers in membranes for efficient CO 2 separation

Pebax/two-dimensional MFI nanosheets mixed-matrix membranes for enhanced CO2 separation

Insight into the aminosilane functionalized-montmorillonite/Pebax mixed matrix membranes with selectively fast gas transport channels for CO 2 permeation

Scalable Mof-Based Mixed Matrix Membranes with Enhanced Permeation Processes Facilitate the Scale Application of Membrane-Based Carbon Capture Technologies

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Pebax-based mixed matrix membranes derived from microporous carbon nanospheres for permeable and selective CO<sub>2</sub> separation

Vesicles-Shaped Mof-Based Mixed Matrix Membranes With Intensified Interfacial Affinity And Co2 Transport Freeway

Efficient CO 2 Separation of Multi-Permselective Mixed Matrix Membranes with a Unique Interfacial Structure Regulated by Mesoporous Nanosheets

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

PEO-based mixed matrix membranes containing N-doped microporous carbon microparticles for enhanced CO2/N2 separation

Tailored design of CO 2 -selective mixed-matrix membranes using nitrile-functionalized COFs as 2D nanofillers

Improved CO 2 separation performance of mixed matrix membranes via expanded layer double hydroxides and methanol post-treatment

Tuning the Multi-Scale Structure of Mixed-Matrix Membranes for Upgrading CO2 Separation Performances

Mixed-matrix membranes comprising porous organic molecular cage for efficient CO2 capture

Mixed matrix membranes with intrinsic microporous/UiO-66 post-synthesis modifications with no defects for efficient CO 2 /N 2 separation

Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency

Boosting CO2 Transport of Poly (ethylene Oxide) Membranes by Hollow Rubik-like “expressway” Channels with Anion Pillared Hybrid Ultramicroporous Materials

Boosting CO 2 transport in mixed matrix membranes by chitosan-MOF networks