Abstract:In bone tissue engineering, polycaprolactone (PCL) is a promising material with good biocompatibility, but its poor degradation rate, mechanical strength, and osteogenic properties limit its application. In this study, we developed an Mg-1Ca/polycaprolactone (Mg-1Ca/PCL) composite scaffolds to overcome these limitations. We used a melt blending method to prepare Mg-1Ca/PCL composites with Mg-1Ca alloy powder mass ratios of 5, 10, and 20 wt%. Porous scaffolds with controlled macro- and microstructure were printed using the fused deposition modeling method. We explored the mechanical strength, biocompatibility, osteogenesis performance, and molecular mechanism of the Mg-1Ca/PCL composites. The 5 and 10 wt% Mg-1Ca/PCL composites were found to have good biocompatibility. Moreover, they promoted the mechanical strength, proliferation, adhesion, and osteogenic differentiation of human bone marrow stem cells (hBMSCs) of pure PCL. In vitro degradation experiments revealed that the composite material stably released Mg 2 + ions for a long period; it formed an apatite layer on the surface of the scaffold that facilitated cell adhesion and growth. Microcomputed tomography and histological analysis showed that both 5 and 10 wt% Mg-1Ca/PCL composite scaffolds promoted bone regeneration bone defects. Our results indicated that the Wnt/ beta -catenin pathway was involved in the osteogenic effect. Therefore, Mg-1Ca/PCL composite scaffolds are expected to be a promising bone regeneration material for clinical application. Statement of significance: Bone tissue engineering scaffolds have promising applications in the regeneration of critical-sized bone defects. However, there remain many limitations in the materials and manufacturing methods used to fabricate scaffolds. This study shows that the developed Ma-1Ca/PCL composites provides scaffolds with suitable degradation rates and enhanced boneformation capabilities. Furthermore, the fused deposition modeling method allows precise control of the macroscopic morphology and microscopic porosity of the scaffold. The obtained porous scaffolds can significantly promote the regeneration of bone defects. (c) 2022 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University

3D-Printed Scaffolds of Mesoporous Bioglass/gliadin/polycaprolactone Ternary Composite for Enhancement of Compressive Strength, Degradability, Cell Responses and New Bone Tissue Ingrowth

3D-Printed Bioceramic Scaffolds with High Strength and High Precision

Three dimensionally printed mesoporous bioactive glass and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) composite scaffolds for bone regeneration

A Composite Lactide-Mineral 3D-Printed Scaffold for Bone Repair and Regeneration

Synergetic effect of bioglass and nano montmorillonite on 3D printed nanocomposite of polycaprolactone/gelatin in the fabrication of bone scaffolds

3D-printed PCL/β-TCP/CS composite artificial bone and histocompatibility study

3D-Printed Mg-1Ca/polycaprolactone Composite Scaffolds with Promoted Bone Regeneration

Mesoporous Bioactive Glass-Coated 3D Printed Borosilicate Bioactive Glass Scaffolds for Improving Repair of Bone Defects.

3D printed polycaprolactone/gelatin/ordered mesoporous calcium magnesium silicate nanocomposite scaffold for bone tissue regeneration

Biodegradable 3D Printed Scaffolds of Modified Poly (Trimethylene Carbonate) Composite Materials with Poly (L-Lactic Acid) and Hydroxyapatite for Bone Regeneration

Physicochemical properties and biocompatibility of PZL/PLGA/bioglass composite scaffolds for bone tissue engineering

Fabrication and Biological Activity of 3D-Printed Polycaprolactone/Magnesium Porous Scaffolds for Critical Size Bone Defect Repair.

Three dimensional printing of calcium sulfate and mesoporous bioactive glass scaffolds for improving bone regeneration in vitro and in vivo

3D-Printed Mg-incorporated PCL-based Scaffolds: A Promising Approach for Bone Healing.

Preparation And Characterization Of Foamy Poly(Gamma-Benzyl-L-Glutamate-Co-L-Phenylalanine)/Bioglass Composite Scaffolds For Bone Tissue Engineering

3D-Printed composite scaffolds based on poly(ε-caprolactone) filled with poly(glutamic acid)-modified cellulose nanocrystals for improved bone tissue regeneration

3D-Printed PLA-Bioglass Scaffolds with Controllable Calcium Release and MSC Adhesion for Bone Tissue Engineering

Enhanced Biocompatibility and Osteogenic Potential of Mesoporous Magnesium Silicate/polycaprolactone/wheat Protein Composite Scaffolds

3D printing of mesoporous bioactive glass/silk fibroin composite scaffolds for bone tissue engineering

Enhanced biocompatibility and osteogenic potential of mesoporous magnesium silicate/polycaprolactone/wheat protein composite scaffolds.

Characterization and Osteogenic Evaluation of Mesoporous Magnesium–calcium Silicate/polycaprolactone/polybutylene Succinate Composite Scaffolds Fabricated by Rapid Prototyping