Abstract:Harvesting energy from ambient moisture and natural water sources is currently of great interest due to the need for standalone self-powered nano/micro-systems. In this work, we report on the development of a cost-effective nanogenerator based on a carbon paper-Al2O3 nanoparticle layer-carbon paper (CAC) sandwich structure, where the 3D Al2O3 layer is deposited via vacuum filtration. This type of device can produce an open-circuit voltage (UOC) of up to 4 V and a short-circuit current (ISC) of ∼18 μA with only an 8 μL water droplet applied. To our knowledge, this is the highest voltage yet reported from a single moisture/water-induced electricity nanogenerator using solid oxides and carbon-based materials. A remarkable output power of 14.8 μW can be reached with an optimized resistive load. An LED with a working voltage of 3-3.2 V can operate for a short time with the power from a single CAC device exposed to one 8 μL water droplet. Furthermore, a CAC generator adsorbing as little as 2 μL water droplets every 3 min can also give a UOC of 3.63 V. We show that CAC devices provide a robust electrical output over more than 200 wet-dry cycles without any deterioration in performance. These units demonstrate much promise as cost-effective electricity generators for harvesting energy from natural sources like rainwater, tap water, snow runoff, and dew. The response time of CAC devices can be as fast as 10-100 ms, making them ideal for applications as self-powered water detectors. The generation of power in this device arises from the streaming current. To assist in the optimization of these devices, we have analyzed how their response is related to such factors as layer thickness, time interval between application of water droplets, and the volume of each water droplet.

Hydrocapacitor for Harvesting and Storing Energy from Water Movement.

Structural Effects on a Sandwich-Like Hydrocapacitor and Its Mechanism Research

Hydrangea-like N/O codoped porous carbons for high-energy supercapacitors

A Filter Paper-Based Nanogenerator via Water-Drop Flow

Boosting the Output of Hydrocapacitors by Structure Modification

Production of a hybrid capacitive storage device via hydrogen gas and carbon electrodes coupling

Bioinspired Carbon Black Deposited Polyimide Fabric for Sustainable Water Energy Harvesting

PVA‐based Hydrogel Materials for Underwater Energy Storage and Underwater Sensing

A Fiber Fluidic Nanogenerator Made from Aligned Carbon Nanotubes Composited with Transition Metal Oxide

Triboelectric Nanogenerator for Droplet Energy Harvesting Based on Hydrophobic Composites

Charge Trapping‐Based Electricity Generator (CTEG): An Ultrarobust and High Efficiency Nanogenerator for Energy Harvesting from Water Droplets

A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al2O3 Nanoparticles.

ATMP Doped Conductive PANI/CNTs Composite Hydrogel Electrodes toward High Energy Density Flexible Supercapacitors

Hierarchical porous carbon with three dimensional nanonetwork from water hyacinth leaves for energy storage

A new type of flexible energy harvesting device working with micro water droplets achieving high output

Constructing a Versatile Hybrid Harvester for Efficient Power Generation, Detection and Clean Water Collection

Rationally Structured Triboelectric Nanogenerator Arrays for Harvesting Water Current Energy and Self‐powered Sensing

Hydrovoltaic Energy Harvesting at Ionic Polymer-Hydrogel-Carbon Composites via Moisture Flow

Self-operating Seawater-Driven Electricity Nanogenerator for Continuous Energy Generation and Storage

Smart and flexible supercapacitor based on a porous carbon nanotube film and polyaniline hydrogel

Harvesting Water Wave Energy by Asymmetric Screening of Electrostatic Charges on A Nanostructured Hydrophobic Thin-Film Surface