Abstract:A series of pH‐neutral conjugated polyelectrolytes with high doping density are designed and synthesized as hole‐transporting layer materials. The high doping density of PTT‐F:POM is proved to significantly decrease the depletion region width at the anode interface, which minimized the energy loss in hole transport. Consequently, a binary organic solar cell modified by PTT‐F:POM achieved a high PCE of 18.8%. The lack of effective and non‐corrosive hole‐transporting layer (HTL) materials has remained a long‐standing issue that severely restricts the performance of organic solar cells (OSCs). Most pH‐neutral conjugated polyelectrolytes (CPEs) exhibit inferior performance to the acid‐doped HTL materials due to their low doping density. In this study, a series of pH‐neutral CPEs is designed and synthesized with high doping density as HTL materials. Through an elaborate synthetic route, two sulfonate‐terminating alkoxyl side chains can be introduced into thiophene, by which the electron‐rich, highly soluble, and chemically stable thiophene monomer is synthesized to enable the subsequent polymerization. The CPE PTT‐F exhibit a remarkable self‐doping property with an enhanced doping density from 2.01 × 1017 to 7.02 × 1018 cm−3. The high work function and the increased doping density of PTT‐F‐based HTL decrease the depletion region width from 38.4 to 8.1 nm at the anode interface, which minimized the energy loss in hole transport. Consequently, a binary OSC modified by PTT‐F‐based HTL achieve a high PCE of 18.8%. To the best of the knowledge, this is the highest PCE for OSC employing CPE‐based HTL. The results from this work demonstrate an encouraging achievement of realizing exceptional hole collection ability in pH‐neutral CPEs.

Functionalized Graphene Oxide Enables High-Performance Bulk Heterojunction Organic Solar Cell with a Thick Active Layer.

Efficient Hole Transport Layers With Widely Tunable Work Function For Deep Homo Level Organic Solar Cells

Noncovalent Phosphorylation of Graphene Oxide with Improved Hole Transport in High-Efficiency Polymer Solar Cells

Multifunctioning Graphene Oxide Capping Layer for Highly Efficient and Stable PEDOT:PSS-Silicon Hybrid Solar Cells

Highly Efficient Organic Solar Cells Enabled by the Incorporation of a Sulfonated Graphene Doped PEDOT:PSS Interlayer

Iron complex/graphene oxide hybrid modification of ZnO surface for achieving stable inverted organic photovoltaics

Composited Film of Poly(3,4-ethylenedioxythiophene) and Graphene Oxide as Hole Transport Layer in Perovskite Solar Cells

Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells.

Performance Analysis and Optimization of a PBDB-T:ITIC Based Organic Solar Cell Using Graphene Oxide as the Hole Transport Layer

Efficient and Stable Inverted Perovskite Solar Cells with Graphene Oxide Modified Hole Transport Layer

Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT:PSS Hole Transport Layer

Highly Efficient Inverted Perovskite Solar Cells Based on Self-Assembled Graphene Derivatives

π‐π Stacking Modulation via Polymer Adsorption for Elongated Exciton Diffusion in High‐Efficiency Thick‐Film Organic Solar Cells

Graded bulk-heterojunction enables 17% binary organic solar cells via nonhalogenated open air coating

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Highly Efficient Organic Solar Cells Consisting of Double Bulk Heterojunction Layers

Application of Reduced Graphene Oxide for Hole Transport Layer in Organic Solar Cells Synthesized from Waste Dry Cell Using Electrochemical Exfoliation Method

Achieving High Doping Density in pH‐neutral Conjugated Polyelectrolyte Toward Effective Hole‐Transporting Materials for Organic Solar Cells

Vertically optimized phase separation with improved exciton diffusion enables efficient organic solar cells with thick active layers

Extremely efficient flexible organic solar cells with a graphene transparent anode: Dependence on number of layers and doping of graphene

Graphene oxide-molybdenum oxide composite with improved hole transport in bulk heterojunction solar cells