Application and Mechanism of Nucleation-Induced Pelleting Coagulation (NPC) in Treatment of Fracturing Wastewater with High Concentration of Dissolved Organic Matter

Xin Jin,Weijie Zhang,Zhonglun Ji,Lihui Zhou,Pengkang Jin,Xiaochang C. Wang,Yaoyao Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2018.08.054

IF: 8.8

2018-01-01

Chemosphere

Abstract:To improve the separation efficiency of fluffy flocs during coagulation of fracturing wastewater with high concentration of dissolved organic matter, a novel nucleation-induced pelleting coagulation (NPC) process is proposed based on pelleting coagulation in this study. In the NPC process, nucleation agents were added to act as pellet seeds to generate high-density pellet flocs. The results implied that the necessary condition for the NPC process was to control the metastable state, i.e. zeta potential around -10 mV after addition of the coagulant, polyaluminium chloride (PAC). Diatomite, which was added after rapid mixing, was used as the nucleation agent, and its optimal dosage was about 100 mg/L with particle size 100-200 mu m. In addition, the dosage of the coagulant aid, polyacrylamide (PAM), significantly affected the performance of the NPC process, and the optimal PAM dosage was 10 mg/L in this study. It was found that 60 rpm (G = 55.1 s(-1)) was the optimal hydraulic condition for pellet growth during slow mixing. The pellet floc settling velocity reached 14.9 mm/s and the particle size (d(50)) reached 4.6 mm with an effective density of 0.021 g/cm(3) at the optimal condition, which was one order higher than that of conventional aluminium flocs. (C) 2018 Elsevier Ltd. All rights reserved.