Optimized electrocoagulation technology using response surface methodology to control H2 production and treatment effect of fracturing flowback fluid treated by electrocoagulation
Zhuozhuang Liu,Wu Chen,Da Wu,Shuxia Wei,Mijia Zhu
DOI: https://doi.org/10.5004/dwt.2022.28501
IF: 1.1
2022-01-01
Desalination and Water Treatment
Abstract:Fracturing flowback fluid is the most important contaminant associated with oil and gas exploration and production, which requires low-cost and sustainable technologies for treatment. This study proposed an electrocoagulation (EC) method that is time saving, highly efficient, and easy to apply to deal with this problem. A Box–Behnken design coupled with the response surface methodology (RSM) was used to construct a model of the EC process to intensively control hydrogen (H2) production and to reduce potential safety risks while achieving high treatment efficiency. The model describes the change in the responses of decolorization rate and H2 production in accordance with electrolysis current, plate spacing, electrolysis time, and S/V. Results show that the turbidity removal rate, decolorization rate, and H2 production are predicted to be 87.03%, 89.14%, and 138.12 mL under the maximum H2 production process. On the contrary, the turbidity removal rate, decolorization rate, and H2 production are predicted to be 91.23%, 95.7%, and 7.86 mL, respectively, under minimum H2 production conditions obtained through the model. The relative error between all the predicted and measured values is less than 2.5%. Overall, the RSM is feasible to optimize and predict the process conditions, treatment effect, and H2 production of EC-treated fracturing flowback fluid. This optimization and prediction study can provide a reference for the efficient and safe application of EC to improve the treatment effect and control the H2 production in the wastewater treatment process.
engineering, chemical,water resources