Abstract:Converting industrial sludge into catalytic materials for water purification is a promising approach to simultaneously realize effective disposal of sludge and resource of water. However, manipulating the high efficiency remains a huge challenge due to the difficulty in the active sites control of the sludge. Herein, we proposed a constitutive modulation strategy by the combination of hydrothermal and pyrolysis (HTP) for the fabrication of defects-assistant Fe containing sludge-derived carbon catalysts on upgrading performance in peroxymonosulfate (PMS) activation for pollutant degradation. Adjustable defects on dyeing sludge-derived carbon catalysts (DSCC) were achieved by introducing oxygen or nitrogen functional precursors (hydroquinone or p -phenylenediamine) during hydrothermal processes and by further pyrolysis, where O was detrimental while N was beneficial to defect generation. Compared to the DSCC with less defects (DHSC-O), the defect-rich sample (DHSC-2N) exhibited superior catalytic performance of PMS activation for bisphenol A (BPA) elimination ( k = 0.45 min −1 , 2.52 times of DHSC-O), as well as 81.4% total organic carbon (TOC) removal. Meanwhile, the degradation capacity was verified in wide pH range (2.1–8.1) and various aqueous matrices, reflecting the excellent adaptability and anti-interference performance. Furthermore, the continuous-flow experiments on industrial wastewater showed synchronous BPA and chemical oxygen demand (COD) removal, implying great potential for practical application. Solid electron paramagnetic resonance (EPR) and 57 Fe Mösssbauer spectra analysis indicated that the defects acted as secondary active sites for Fe sites, which were beneficial to accelerating the electron transfer process. The only Fe active sites preferred the radical pathway. The controllable reaction tendency provides possibilities for the on-demand design of sludge-based catalysts to meet the requirements of practical wastewater treatment under Fenton-like reaction.

Activation of Persulfate by CuO-sludge-derived Carbon Dispersed on Silicon Carbide Foams for Odorous Methyl Mercaptan Elimination: Identification of Reactive Oxygen Species

Preparation of Porous Silicate Supported Micro-Nano Zero-Valent Iron from Copper Slag and Used As Persulfate Activator for Removing Organic Contaminants.

Activation of Persulfate by Stability-Enhanced Magnetic Graphene Oxide for the Removal of 2,4-Dichlorophenol

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Heterogeneous activation of persulfate by CuMgAl layered double oxide for catalytic degradation of sulfameter

In-situ Synthesis of Highly Dispersed Cu-CuxO Nanoparticles on Porous Carbon for the Enhanced Persulfate Activation for Phenol Degradation

Performance and mechanisms of sulfadiazine removal using persulfate activated by Fe3O4@CuOx hollow spheres

Heterogeneous activation of persulfate by supporting ferric oxalate onto activated carbon fibers for organic contaminants removal

Insights into the mechanism of persulfate activation with carbonated waste metal adsorbed resin for the degradation of 2,4-dichlorophenol

Persulfate activation by novel iron–carbon composites for organic contaminant removal: Performance, mechanism, and DFT calculations

Well-defined Fe/Cu Diatomic Catalysts for Boosted Peroxymonosulfate Activation to Degrade Organic Contaminants

Efficient activation of persulfate by metallic sulfide mineral for the efficient removal of pesticides: Performance, radical generation and mechanism

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

Insight into the Discriminative Efficiencies and Mechanisms of Peroxy Activation via Fe/Cu Bimetallic Catalysts for Wastewater Purification

Electro-activating persulfate via biochar catalytic cathode for sulfamethazine degradation: Performance and mechanism insight

MOF-derived Cu<SUP>0</SUP>/C activation of molecular oxygen for efficient degradation of sulfamethazine

Ultrahigh Peroxymonosulfate Utilization Efficiency over CuO Nanosheets Via Heterogeneous Cu(III) Formation and Preferential Electron Transfer During Degradation of Phenols.

Degradation mechanism and pathway of 2,4-dichlorophenol via heterogeneous activation of persulfate by using Fe-Cu-MOF@C nanocatalyst

Efficient catalytic oxidation of methyl mercaptan to sulfur dioxide with NiCuFe mixed metal oxides

An in-situ electrogenerated persulfate and its activation by functionalized sludge biochar for efficient degradation of sulfamethoxazole

Efficient removal of sulfamethoxazole by biomass phosphorus-derived Cu 3 P/biochar catalyst combined with persulfate