Abstract:Much work is devoted to heavy metal sorption, reduction and relevant mechanisms by nanoscale zero valent iron (nZVI) particle, but fewer studies utilize its magnetic properties in aqueous metal removals. Here, we have investigated the use of nZVI particles both electrosprayed (E-nZVI) and non-electrosprayed (NE-nZVI) with different concentration levels (0.186-1.86 mg/mL) in removing aqueous Cd(II), Cr(IV), and Pb(II) through the magnetic separation means. The effects of the reaction time (5-20 min) and magnetic treatment time (1-30 min) on relevant magnetic removal efficiencies were studied. Metal ion concentration was analyzed using inductively coupled plasma (ICP), and the magnetically obtained metal-nZVI mixtures were further analyzed using X-ray photoelectron spectroscopy (XPS).Results showed that the magnetic removal efficiencies of heavy metals varied with the metal species, nZVI loading, reaction and magnetic separation time. In most cases, use of 1.5 mg/mL E-nZVI or NE-nZVI resulted in removal efficiencies of more than 80% for Pb(II), Cd(II), and Cr(IV). Increasing the magnetic treatment time from 1 to 20 min was shown to lead to similar to 20% increase in Pb(II) removal efficiency, but no improvements for Cd(II) and Cr(IV). In contrast, increasing the reaction time decreased the Pb(II) removal efficiency, yet no effects observed for Cd(II) and Cr(IV). In general, 1 min reaction and 5 min magnetic treatment were found sufficient to achieve considerable heavy metal removals. For comparable efficiencies, use of magnetic method could significantly reduce nZVI loading. XPS analysis results indicated that atomic percentages of O 1s, Fe 2p, Cd 3d, Pb 4f and Cr 2p varied with metal exposures. Different from Cd(II) and Cr(IV), aqueous iron ions might be possibly present when treating Pb(II). This study demonstrated a rapid heavy metal removal method using the magnetic property of nZVI particles, while contributing to understanding of the relevant removal mechanisms. (C) 2013 Elsevier Ltd. All rights reserved.

Removal of V (V) and Pb (II) by nanosized TiO2 and ZnO from aqueous solution.

Adsorption of Pb2+ from Aqueous Solution by Black TiO2-x Nanoparticles with Enhanced Surface Area and Porosity

Physicochemical studies toward the removal of Zn(II) and Pb(II) ions through adsorption on montmorillonite-supported zero-valent iron nanoparticles

Highly efficient removal of bivalent heavy metals from aqueous systems by magnetic porous Fe3O4-MnO2: Adsorption behavior and process study

Experimental modelling studies on the removal of dyes and heavy metal ions using ZnFe2O4 nanoparticles

Efficient Removal of Pb(II) Ion Using Tio2/Zno/Sio2 Nanocomposite from Aqueous Solutions Via Adsorption-Photocatalysis Process

Removal of Pb (II) and V (V) from aqueous solution by glutaraldehyde crosslinked chitosan and nanocomposites

Removal of Pb(II), Cr(III), Co(II), Cu(II) cations from aqueous solutions using tetraethylenepentamine-functionalized HY cubic zeolite: optimization, characterization, and mechanistic insights

Removal of Pb(ii) by Nano-Titanium Oxide Investigated by Batch, XPS and Model Techniques

Mechanistic Study of Pb(II) Removal by TiO<sub>2</sub> and Effect of PO<sub>4</sub>

Effective removal of Zn (II) ions from aqueous solution by the magnetic MnFe2O4 and CoFe2O4 spinel ferrite nanoparticles with focuses on synthesis, characterization, adsorption, and desorption

Removal of Lead(ii) from Aqueous Solution by Adsorption Onto Manganese Oxide-Coated Carbon Nanotubes

Zero-Valent Iron Nanoparticles (Nzvi) Supported By Kaolinite For Cu-Ii And Ni-Ii Ion Removal By Adsorption: Kinetics, Thermodynamics, And Mechanism

Removal of aqueous Zn(II) and Ni(II) by Schiff base functionalized PAMAM dendrimer/silica hybrid materials

Characterization and Adsorption Mechanism of Zn2+ Removal by PVA/EDTA Resin in Polluted Water.

Rapid Magnetic Removal of Aqueous Heavy Metals and Their Relevant Mechanisms Using Nanoscale Zero Valent Iron (nzvi) Particles

Adsorption and removal mechanism of Pb(II) by oxidized multi-walled carbon nanotubes

Remobilization of ZnO–TA nanoadsorbent for U(vi) and Th(iv) extraction: adsorption optimization through the Box–Behnken design model

Nanoscale Zero-Valent Iron Dispersed by Sodium Alginate Enables Highly Efficient Removal of Lead (Pb) from Aqueous Solution

Removal of uranium(VI) from aqueous solution by Mg(OH)2-coated nanoscale zero-valent iron: Reactivity and mechanism

An Efficient Approach for Pb(Ii) and Cd(Ii) Removal Using Manganese Dioxide Formed in Situ