Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Intrinsically Ionic Conductive Cellulose Nanopapers Applied As All Solid Dielectrics for Low Voltage Organic Transistors

High Electrical Conductivity and Carrier Mobility in Ocvd PEDOT Thin Films by Engineered Crystallization and Acid Treatment

Editorial: High-Performance Organic Thin-Film Transistors

Aqueous gating of van der Waals materials on bilayer nanopaper.

Cellulose‐Based Flexible Functional Materials for Emerging Intelligent Electronics

Flexible Indium‐Tin‐Oxide Homojunction Thin‐Film Transistors with Two In‐Plane Gates on Cellulose‐Nanofiber‐Soaked Papers

Flexible Low-Voltage IGZO Thin-Film Transistors with Polymer Electret Gate Dielectrics on Paper Substrates

Polysiloxane-Poly(Vinyl Alcohol) Composite Dielectrics For High-Efficiency Low Voltage Organic Thin Film Transistors

Healable Cellulose Iontronic Hydrogel Stickers for Sustainable Electronics on Paper

Ultra-thin Bacterial Cellulose/poly(ethylenedioxythiophene) Nanofibers Paper Electrodes for All-Solid-state Flexible Supercapacitors

Research Progress of Cellulose Conductive Substrates and Its Flexible Electronic Devices

High Performance Organic Electronic Devices Based on a Green Hybrid Dielectric

Ultrastable Large-Area Atomically Flat 2D Polymer Dielectric for Low-Voltage Flexible Organic Field-Effect Transistors

Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors

Biocompatible and Biodegradable Organic Transistors Using a Solid‐State Electrolyte Incorporated with Choline‐Based Ionic Liquid and Polysaccharide

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

Bilayer Metal Oxide Channel Thin Film Transistor With Flat Interface Based on Smooth Transparent Nanopaper Substrate

Flexible Protonic/Electronic Coupled Neuron Transistors Self-Assembled on Paper Substrates for Logic Applications

Polymethyl Methacrylate Substrate-Inducing Highly Ordered Regenerated Cellulose Films Toward Ultra-High Breakdown Strength and Charge–Discharge Efficiency

Multifunctional Poly(3,4-ethylenedioxythiophene)/Crystalline Nanofibrous Cellulose Composites for Eco-Friendly and Sustainable Electronics

Printed Carbon Nanotube Thin Film Transistors Based on Perhydropolysilazane-Derived Dielectrics for Low Power Flexible Electronics