Abstract:Low-cost nitrogen-enriched activated carbons (PNACs) with high microporosity were prepared by a simple one-step activation doping process using KOH as a chemical activator and melamine formaldehyde (MF) as a nitrogen source. These PNACs have shown great potential as effective CO 2 adsorbents. The resulting PNACs were mainly microporous structure, with surface areas ranging from 736 to 2144 m 2 /g and total pore volumes ranging from 0.565 to 1.366 cm 3 /g. The CO 2 adsorption capacities of PNACs were in the range of 2.353 to 6.068 mmol/g and 1.59 to 4.131 mmol/g at 0 °C and 25 °C under 1 bar, respectively. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The experimental isotherm data were analyzed using various equations and the Toth isotherm equation was found to be the most accurate mathematical model to describe the CO 2 adsorption isotherm of the activated carbon. This result further confirms that PNACs have a non-homogeneous pore structure. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The exceptional CO 2 adsorption properties can be attributed to the high microporosity and nitrogen content of the PNACs. The relationship between the physicochemical properties and CO 2 adsorption performance of the activated carbon was further investigated by relevance analysis. At 0 °C and 1 bar, it was observed that the pore structure played a predominant role in the CO 2 adsorption process of PNACs. During this condition, PNACs mainly exhibited physical adsorption, which was primarily governed by the microporous filling mechanism. However, at 25 °C and 1 bar, both microporosity and nitrogen content contribute equally to the CO 2 adsorption effect. This observation confirms that the pore structure and nitrogen functional groups work synergistically to influence the CO 2 adsorption performance of PNACs. The adsorption mechanism of PNACs can be described as physical adsorption, driven by the cooperation between nitrogen functional groups and the filling of micropores. This innovative one-step activation doping process successfully converts agricultural and plastic waste into sustainable and high-performance CO 2 adsorbents. It provides new insights for mitigating the greenhouse effect and addressing the issue of plastic pollution.

Probing The Role Of O-Containing Groups In Co2 Adsorption Of N-Doped Porous Activated Carbon

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Biomass Based N/O Codoped Porous Carbons with Abundant Ultramicropores for Highly Selective CO2 Adsorption

N-doped hierarchically porous carbons prepared with the assistance of chemical blowing and in-situ hard template as highly efficient CO 2 adsorbents: A combined experimental and theoretical study

Enhancing CO 2 adsorption performance of porous nitrogen-doped carbon materials derived from ZIFs: Insights into pore structure and surface chemistry

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

One-Pot Synthesis of N-Rich Porous Carbon for Efficient CO2 Adsorption Performance

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

CO2adsorption on Crab Shell Derived Activated Carbons: Contribution of Micropores and Nitrogen-Containing Groups

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Synthesis of hollow micro-mesoporous nitrogen-doped carbon nanoparticles for enhanced CO2 capture

Oxygen-Containing Functional Group-Facilitated Co2 Capture by Carbide-Derived Carbons

Dual‐Cation Activation of N‐Enriched Porous Carbons Improves Control of CO2 and N2 Adsorption Thermodynamics for Selective CO2 Capture

Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Superior CO2 uptake of N-doped activated carbon through hydrogen-bonding interaction

The effects of nitrogen functional groups and narrow micropore sizes on CO2 adsorption onto N-doped biomass-based porous carbon under different pressure

N‐doped Porous Carbon Derived from the Pyrolysis of a Polydopamine‐coated Hypercross‐linked Polymer for Enhanced CO2 Adsorption

Synergistic effect of pore generation and nitrogen doping on the enhanced CO 2 capture and selectivity of carbon nanofibers