Hierarchical Assembly of Tungsten Spheres and Epoxy Composites in Three-Dimensional Graphene Foam and Its Enhanced Acoustic Performance As a Backing Material.

Yunfeng Qiu,Jingjing Liu,Yue Lu,Rui Zhang,Wenwu Cao,PingAn Hu

DOI: https://doi.org/10.1021/acsami.6b06024

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Backing materials play important role in enhancing the acoustic performance of an ultrasonic transducer. Most backing materials prepared by conventional methods failed to show both high acoustic impedance and attenuation, which however determine the bandwidth and axial resolution of acoustic transducer, respectively. In the present work, taking advantage of the structural feature of 3D graphene foam as a confined space for dense packing of tungsten spheres with the assistance of centrifugal force, the desired structural requirement for high impedance is obtained. Meanwhile, superior thermal conductivity of graphene contributes to the acoustic attenuation via the conversion of acoustic waves to thermal energy. The tight contact between tungstate spheres, epoxy matrix, or graphene makes the acoustic wave depleted easily for the absence of air barrier. The as prepared 3DG/W-80 wt %/epoxy film in 1 mm, prepared using similar to 41 mu m W spheres in diameter, not only displays acoustic impedance of 13.05 +/- 0.11 MRayl but also illustrates acoustic attenuation of 110.15 +/- 1.23 dB/cm MHz. Additionally, the composite film exhibits a high acoustic absorption coefficient, which is 94.4% at 1 MHz and 100% at 3 MHz, respectively. Present composite film outperforms most of the reported backing materials consisting of metal fillers/polymer blending in terms of the acoustic impedance and attenuation.