[Operating Characteristics and Fouling Characteristics of a RO Membrane System for Desalination of Dyeing Wastewater].

Yu-Jun Tan,Ze-Tian Zhang,Qian-Yuan Wu,Ying Yao,Hong-Ying Hu,Pei-Wen Qiu
DOI: https://doi.org/10.13227/j.hjkx.201707020
2018-01-01
Abstract:The reverse osmosis (RO) process is of great significance for the desalination and reclamation of dyeing wastewater. However, fouling of RO membranes has been a severe problem and key limiting factor in the widespread application of the RO process. The operating characteristics and fouling characteristics of a RO membrane system for desalination of dyeing wastewater were investigated in an industrial park in Guangdong Province. The results showed that the COD and turbidity of RO influent after ozone oxidation-sand filtration-ultrafiltration (UF) processes were 12.4 mg ·L-1 and<1 NTU, respectively, with a stable desalination rate of the RO system of around 98%. The COD and turbidity of the RO effluent were 0.7 mg ·L-1 and 0.12 NTU, respectively. However, after 3 years of operation, the pressure drop across the membrane reached 0.6 MPa, and the permeate flux decreased to 120 m3 ·h-1, which could not be restored to its original flux by chemical cleaning. The organic and inorganic matter occupied (53.5±0.2)% and (46.5±0.2)% of the deposits on the RO membrane, respectively, suggesting both organic and inorganic fouling were the main problems for the RO membrane. Si, Al, and Ca were major inorganic elements on the RO membrane. Large amounts of Si, Al, and organic matter deposited on the RO membrane were dissolved easily by alkaline (NaOH) solution than acid (HCl) solution.
What problem does this paper attempt to address?