Novel Method for the Arsenic Removal Experiment and Mechanism Analysis
Hao Zhu,Wenhui Lin,Liwen Fan
DOI: https://doi.org/10.1021/acsomega.3c03590
IF: 4.1
2023-09-22
ACS Omega
Abstract:This study focuses on the hydrothermal synthesis of magnetically activated carbon and its efficacy in As(III) adsorption. The successful incorporation of magnetite nanoparticles within the porous carbon structure was confirmed, enriching the adsorbent's properties. Comprehensive characterization was performed to analyze the pore size distribution, zeta potential at varying pH levels, and thermostability using thermogravimetric analysis. These adsorbents exhibited high As(III) removal efficiency with a uniform pore distribution. The zeta potentials were observed to decrease with an increase in pH, suggesting a relationship between adsorbent charge and pH. Adsorption dynamics were rigorously modeled using pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models for different adsorbents labeled as a,b,c, and d. Each adsorbent displayed unique fitted parameters, revealing varied adsorption capabilities. The study further explored the adsorption kinetics and found that the pseudo-second-order kinetics model and the Langmuir model were most appropriate for describing the adsorption process. Adsorption thermodynamics was also fitted to elucidate the underlying adsorption mechanisms. For the a,b,c, and d adsorbents, the pseudo-first-order model, the qe(cal) values for the four adsorbents were 434.2, 418.4, 283.5, and 279.5 μg/g, respectively. Take adsorbent a as an example; the qm values for 298, 303, 308, and 313 K were 702, 673, 605, and 589 μg/g, respectively, and KL values of these temperatures were 0.021, 0.031, 0.018, and 0.009 L/μg, respectively. For the Langmuir model, the R2 values at the four temperatures were 0.999, 0.978, 0.985, and 0.993, respectively, which indicated that the Langmuir model showed higher fitness. For the Freundlich model, the KL values (L/μg) at the parameters of these temperatures are 432, 409, 328, and 294, respectively. For the Freundlich model, the 1/n values at temperatures of 298, 303, 308, and 313 K are 0.049, 0.045, 0.052, and 0.035, respectively. For the Freundlich model, the R2 values at parameters of 298, 303, 308, and 313 K are 0.986, 0.989, 0.982, and 0.872, respectively. For the Temkin model, the B values (in J/mol) are 30.93, 0.894, 0.824, and 0.782 at these temperatures, respectively. The KT values (in L/μg) are 1.02 × 106, 0.07 × 106, 0.003 × 106, and 0.002 × 106, respectively. The R2 values are 0.973, 0.958, 0.972, and 0.894, respectively. In the end, the ΔH, ΔS, and ΔG values for different adsorbents were calculated. Collectively, these findings contribute significant insights into the design and application of magnetically activated carbon adsorbents for effective As(III) removal.