Abstract:Due to the characteristics of high energy storage efficiency, large energy storage capacity and constant phase change temperature, organic phase change materials have been widely used in the field of thermal energy storage . However, organic phase change materials present a lower thermal conductivity which emerges as a critical limitation to the energy storage efficiency of latent heat thermal energy storage systems. To improve the thermal properties, the superior composite phase change materials of graphene aerogel impregnated paraffin wax were prepared in present study. Hydrothermal reaction method was used to prepare aerogel. Optimal conditions for aerogel preparation were identified as 140 °C/2.5 h/90%/(1:100) (140 °C is the hydrothermal working temperature of the reactor, 2.5 h indicates a treatment time, 90% is the solution occupying the reactor volume and 1:100 is the graphene oxide (GO)/water ratio in the solution). Furthermore, the addition of ethylenediamine and graphene nanoplatelets accelerated the reaction process, which required a hydrothermal treatment time by 50%. For the composite phase change material PW-GO/GNP-3 with a GO/GNP mass fraction of 4.4%, the thermal conductivity was 209.7% of that for the pure PW and the energy storage efficiency was still maintained at 91.60%. Meanwhile, the composite phase change material exhibits a leakage ratio of lower than 3.8%. In addition, based on the prepared composite phase change material samples, the phase change characteristics of phase change material in single cavity and three-cavities have also been examined. The synchronous phase change in three-cavities has been obtained by arranging the phase change material with low melting temperature in the cavity with low temperature, which requires the shortest melting time.

Fabrication and Thermal Properties of Tetradecanol/graphene Aerogel Form-Stable Composite Phase Change Materials.

Investigation on thermal energy storage characteristics of form-stable phase change materials supported by graphene aerogel

Form-stable phase change material embedded with chitosan-derived carbon aerogel

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Effect of Graphene Aerogel on Thermal Behavior of Phase Change Materials for Thermal Management

Highly thermally conductive phase change composites with excellent solar-thermal conversion efficiency and satisfactory shape stability on the basis of high-quality graphene-based aerogels

Graphene-carbon nanotube hybrid aerogel/polyethylene glycol phase change composite for thermal management

Preparation of Graphene Oxide Coated Tetradecanol/expanded Graphite Composite Phase Change Material for Thermal Energy Storage

Fabrication of Shape-Stable Composite Phase Change Materials Based on Lauric Acid and Graphene/graphene Oxide Complex Aerogels for Enhancement of Thermal Energy Storage and Electrical Conduction

Synthesis and characteristics of form-stable n-octadecane/expanded graphite composite phase change materials

Material preparation and heat transfer characterization of porous graphene aerogel composite phase change material

Styrene-acrylic Emulsion/graphene Aerogel Supported Phase Change Composite with Good Thermal Conductivity

Preparation and Performance of Paraffin/Expanded Graphite/Graphene Composite Phase Change Heat Storage Material

Tetradecanol/expanded graphite composite form-stable phase change material for thermal energy storage

Thermal Properties of 1-Tetradecanol/Polyvinyl Butyral Composite Phase Change Materials with Expanded Graphite for Latent Heat Storage

Molecular dynamics simulation of thermal properties in composite phase change materials based on functionalized graphene and polyethylene glycol

Thermal properties of 1-hexadecanol/high density polyethylene/graphene nanoplates composites as form-stable heat storage materials

Characterization of Phase Change Materials Fabricated with Cross-Linked Graphene Aerogels

Insight into Heat Transfer Process of Graphene Aerogel Composite Phase Change Material

Thermal Performance Improvement of Composite Phase-Change Storage Material of Octanoic Acid–Tetradecanol by Modified Expanded Graphite

Graphene–nickel/n-carboxylic Acids Composites As Form-Stable Phase Change Materials for Thermal Energy Storage