Abstract:Porphyrins and their derivatives are a unique class of multifunctional and modifiable π-conjugated heterocyclic organic molecules, which have been widely applied in the fields of optoelectronic devices and catalysis. However, the application of porphyrins in polymer electrolytes for all-solid-state lithium-ion batteries (ASSLIBs) has rarely been reported. Herein, porphyrin molecules modified by polyether chains are used for composite solid-state polymer electrolytes (CSPEs) for the first time. The introduction of a modified porphyrin in an electrolyte can not only promote the electrochemical properties by constructing ordered ion channels via the intermolecular interaction between π-conjugated heterocyclic porphyrins, but also significantly improve the mechanical strength and interface contact between the electrolyte membrane and the lithium metal anode. Consequently, the all-solid-state batteries assembled by the modified porphyrin composite polymer electrolyte, LiFePO4 cathodes, and Li anodes deliver a higher discharge capacity of 158.2 mA h g–1 at 60 °C, 0.2 C, which remains at 153.6 mA h g–1 after 120 cycles with an average coulombic efficiency of ∼99.60%. Furthermore, the flexible porphyrin-based composite polymer electrolyte can also enable a Li || LiCoO2 battery to exhibit a maximum discharge capacity of 108.6 mA h g–1 at 60 °C, 0.1 C with an active material loading of 2–3 mg cm–2, which is unable to realize for the corresponding batteries with a pure PEO-based polymer electrolyte. This work not only broadens the application scope of porphyrins, but also proposes a novel method to fabricate CSPEs with improved electrochemical and mechanical properties, which may shed new light on the development of CSPEs for next-generation high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12086.Additional experimental details including materials, monomer synthesis, characterizations and electrochemical measurements; 1H NMR and UV–vis spectra of the obtained monomers; photographs of the obtained electrolytes; characterizations of the as-prepared CSPE; FTIR, 1H NMR, and XPS spectra of PEO SPE and CSPE; additional cell performances; SEM images of the cycled Li foils; analysis of the SEI of the corresponding batteries; pouch-type cell testing; thermal behavior of pure PEO, PEO-35wt% Li SPE, and CSPE-20wt% HP-35wt% Li; related parameters and the lithium-ion transference number; element ratios of C, F, O, and S; and cell performance of several lithium-metal batteries using PEO-based composite electrolytes with different functional fillers (PDF)All-solid-state pouch cell regaining its original shape and the LED remaining lit (MP4)Pouch-type cell lighting up the LED lamp after being penetrated with a nail (MP4)This article has not yet been cited by other publications.

Cross-Linked Nanohybrid Polymer Electrolytes with POSS Cross-Linker for Solid-State Lithium Ion Batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Poly(ε-caprolactone)-block-poly(ethylene Glycol)-Block-poly(ε-caprolactone)-based Hybrid Polymer Electrolyte for Lithium Metal Batteries

Poss Hybrid Poly(Ionic Liquid) Ionogel Solid Electrolyte for Flexible Lithium Batteries

3D cross-linked POSS-containing borate single ion conductor organic-inorganic hybrid gel electrolytes for dendrite-free lithium metal batteries

Boosting the Performance of Solid‐State Lithium Battery Based on Hybridizing Micron‐Sized LATP in a PEO/PVDF‐HFP Heterogeneous Polymer Matrix

Cross-Linked Branching Nanohybrid Polymer Electrolyte with Monodispersed Tio2 Nanoparticles for High Performance Lithium-Ion Batteries

A Dual-Salt Peo-Based Polymer Electrolyte with Cross-Linked Polymer Network for High-Voltage Lithium Metal Batteries

Hybrid Crosslinked Solid Polymer Electrolyte via In‐Situ Solidification Enables High‐Performance Solid‐State Lithium Metal Batteries

An Asymmetric Cross-Linked Ionic Copolymer Hybrid Solid Electrolyte with Super Stretchability for Lithium-Ion Batteries

Multisite Crosslinked Poly(ether‐urethane)‐Based Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries

High performance of solid electrolyte endowed by SiO 2 cross-linking agent towards lithium metal battery

Performance Enhancement of PEO: LiDFOB Based Nanocomposite Solid Polymer Electrolytes via Incorporation of POSS-PEG 13.3 Hybrid Nanoparticles for Solid-State Li-ion Batteries

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

Photo-Cross-Linked Single-Ion Conducting Polymer Electrolyte for Lithium-Metal Batteries

Crosslinked Poly(tetrahydrofuran) as a Loosely Coordinating Polymer Electrolyte

In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries

Lithium bis(oxalate)borate crosslinked polymer electrolytes for high-performance lithium batteries

Application of a Modified Porphyrin in a Polymer Electrolyte with Superior Properties for All-Solid-State Lithium Batteries

Polymer Electrolytes Based on Poly(Vinylidene Fluoride-Co-Hexafluoropropylene) with Crosslinked Poly(Ethylene Glycol) for Lithium Batteries

A rigid-flexible coupling poly(vinylene carbonate) based cross-linked network: A versatile polymer platform for solid-state polymer lithium batteries