Abstract:By employing a carbon nanotube (CNT) sponge with a 3D porous network as a compressible substrate and NiCo2S4 nanoparticles as active materials, a NiCo2S4/CNT sponge electrode with high compression characteristics and prominent capacitance is fabricated by a solvothermal method. NiCo2S4 nanoparticles with size ranging from 20 to 25 nm are evenly anchored on the network of a CNT sponge, making it show excellent compression performance and large specific capacitance of 1110 F g–1. Meanwhile, a Fe2O3/CNT sponge as an anode with a specific capacitance of 330 F g–1 for a widening voltage window is also fabricated by hydrothermal reaction technology. A NiCo2S4/CNT//Fe2O3/CNT asymmetric supercapacitor with high compression is assembled using a NiCo2S4/CNT sponge and an Fe2O3/CNT sponge as the cathode and anode electrode, respectively, and its potential window can reach up to 1.7 V. The assembled device not only delivers a high specific capacitance of 117 F g–1 at 1 A g–1, but also shows excellent compression and flexibility. Moreover, it exhibits a superior energy density of 41.6 W h kg–1 and excellent long-run cyclic stability that retains about 82% of the initial capacitance after 5000 cycles under about 80% strain. The NiCo2S4/CNT//Fe2O3/CNT asymmetric supercapacitor may offer a feasible approach for assembling compressible energy devices on account of its remarkable compression property, superior specific capacitance, and distinguished Coulombic efficiency.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c03745?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c03745</a>.Experimental section; XRD patterns of NiCo2S4 nanoparticles and NiCo2S4/CNT-33 sponge; SEM images of NiCo2S4/CNT sponge electrodes obtained by solvothermal treating in different concentrations of Ni(NO3)2·6H2O·6H2O with a molar ratio of Co:Ni = 2 for 10 h at 180 °C: (a) pure CNT, (b) NiCo2S4/CNT-8.3, (c) NiCo2S4/CNT-17, (d) NiCo2S4/CNT-33, (e) NiCo2S4/CNT-50, and (f) NiCo2S4/CNT-67; electrochemical properties of NiCo2S4/CNT sponge electrodes obtained by solvothermal treating in different concentrations with a molar ratio of Co:Ni = 2 for 10 h at 180 °C in 3 M KOH: (a) CV curves, (b) GCD curves, (c) Nyquist plot over the frequency range of 100 kHz to 0.1 Hz, and (d) specific capacitance at different current densities; NiCo2S4/CNT-33 sponge electrode corresponding b-value found by using the peak current relationship to the scan rate; specific capacitance of the NiCo2S4/CNT-33 sponge at each evaluated current density for different set strains; and compressive stress–strain curves of the asymmetric supercapacitor at different strains (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c03745/suppl_file/ef0c03745_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

CoNi 2 S 4 Nanoparticle/Carbon Nanotube Sponge Cathode with Ultrahigh Capacitance for Highly Compressible Asymmetric Supercapacitor.

3D Hierarchical NiCo 2 S 4 Nanoparticles/Carbon Nanotube Sponge Cathode for Highly Compressible Asymmetric Supercapacitors

High Energy Density Asymmetric Supercapacitor Based ZnS/NiCo2S4/Co9S8 Nanotube Composites Materials

Hierarchically Structured Co9S8@NiCo2O4 Nanobrushes for High-Performance Flexible Asymmetric Supercapacitors

CoNi2S4 Nanosheets on Nitrogen-Doped Carbon Foam As Binder-Free and Flexible Electrodes for High-Performance Asymmetric Supercapacitors

Porous NiCo2O4–FeCo2O4 Nanowire Arrays As Advanced Electrodes for High-Performance Flexible Asymmetric Supercapacitors

A 3d Nico2s4 Nanosheets/Cuco2s4 Nanoparticles Nanostructure Synthesized Through Chemical Precipitation for Asymmetric Supercapacitors

3D Self-Supported NiS<sub>2</sub>/Ti<sub>3</sub>C<sub>2</sub>Tx-CC Composite Electrode for High-Performance Flexible Supercapacitors

All-solid State Symmetric Supercapacitors Based on Compressible and Flexible Free-Standing 3D Carbon Nanotubes (Cnts)/poly(3,4-Ethylenedioxythiophene) (PEDOT) Sponge Electrodes

Nitrogen and Sulfur Co-Doped Porous Carbon Fibers Film for Flexible Symmetric All-Solid-state Supercapacitors

3D Self-Supported NiS2/Ti3C2Tx-CC Composite Electrode for High-Performance Flexible Supercapacitors

An Asymmetric Supercapacitor Based on a NiO/Co3O4@NiCo Cathode and an Activated Carbon Anode

High Performance of Electrochemically Deposited NiCo2S4/CNT Composites on Nickel Foam in Flexible Asymmetric Supercapacitors

Highly Compression-Tolerant Folded Carbon Nanotube/paper As Solid-State Supercapacitor Electrode

Boosting Areal Capacitance and Energy Density of a Flexible Supercapacitor Based on High-Mass-Loading Layered Double Hydroxides

A Flexible All-Solid-state Asymmetric Supercapacitors Based on Hierarchical Carbon Cloth@comoo4@nico Layered Double Hydroxide Core-Shell Heterostructures

Self-standing Ultrathin NiCo2S4@carbon Nanotubes and Carbon Nanotubes Hybrid Films As Battery-Type Electrodes for Advanced Flexible Supercapacitors

Hierarchical FeCo2O4@NiCo Layered Double Hydroxide Core/shell Nanowires for High Performance Flexible All-Solid-state Asymmetric Supercapacitors

A 3D Nanocomposite of NiCo2S4 /cuco2s4 Heterostructure Synthesized by Chemical Precipitation for Asymmetric Supercapacitors

High Flexibility and Large Energy Density Asymmetric Fibered-Supercapacitor Based on Unique NiCo2O4@MnO2 Core-Shell Nanobrush Arrays Electrode

Carbon nanotubes@Ni<sub>3</sub>V<sub>2</sub>O<sub>8</sub>@NiCo<sub>2</sub>S<sub >4</sub> nanosheets on Ni foam as a cathode for high-performance aqueous supercapacitors