Abstract:New filtration materials covered with metallic oxides are good adsorbents for both cation and anion forms of pollutants. Sfax is one of the most important industrial towns in Tunisia. Its phosphate manufacture in particular is causing considerable amounts of water pollution. Therefore, there is a need to find out a new way of getting rid of this excessive phosphate from water. This work is aimed to examining the potential of three sorbent materials (synthetic iron oxide coated sand (SCS), naturally iron oxide coated sand (NCS) and iron oxide coated crushed brick (CB)) for removing phosphate ions from aqueous solutions. According to our literature survey CB was not used as adsorbent previously. Phosphate ions are used here as species model for the elimination of other similar pollutants (arsenates, antimonates). Optical microscope and scanning electron microscope (SEM) analyses were used to investigate the surface properties and morphology of the coated sorbents. Infra-red spectroscopy and X-ray diffraction techniques were also used to characterize the sorbent structures. Results showed that iron coated crushed brick possess more micro pores and a higher surface area owing to its clay nature. The comparative sorption of PO4(3-) from aqueous solutions by SCS, CB and NCS was investigated by batch experiments. The estimated optimum pH of phosphate ion retention for the considered sorbents was 5. The equilibrium data were analysed using the Langmuir and Freundlich isotherms. The sorption capacities of PO(4)3- at pH 5 were 1.5 mg/g for SCS, 1.8 mg/g for CB and 0.88 mg/g for NCS. The effect of temperature on sorption phenomenon was also investigated. The results indicated that adsorption is an endothermic process for phosphate ions removal. This study demonstrates that all the considered sorbents can be used as an alternative emerging technology for water treatment without any side effect or treatment process alteration.

Phosphate Removal from Aqueous Solution Using Iron Oxides: Adsorption, Desorption and Regeneration Characteristics.

Magnetically modified MgO nanoparticles as an efficient adsorbent for phosphate ions removal from wastewater

Effective Removal Of Phosphate From Aqueous By Graphene Oxide Decorated With : Kinetic, Isotherm, Thermodynamic And Mechanism Study

Effective Removal of Phosphate from Aqueous by Graphene Oxide Decorated with -Fe_2O_3 : Kinetic, Isotherm, Thermodynamic and Mechanism Study

Adsorptive Removal of Phosphorus from Aqueous Solution Using Sponge Iron and Zeolite.

Removal of Phosphate from Water by a Fe–Mn Binary Oxide Adsorbent

[Sorption-Desorption of Phosphate in Wastewater by Hydrous Iron Oxide].

Phosphate Removal from Aqueous Solutions by a Nano-Structured Fe–Ti Bimetal Oxide Sorbent

Phosphorus removal from aqueous solution using iron coated natural and engineered sorbents

Equilibrium and Kinetics Studies of Adsorption Phosphate on Raw and Novel Lithium Silica Fume Based Adsorbent

Removal of phosphate from aqueous solution by magnetic Fe–Zr binary oxide

Removal of Phosphate from Aqueous Solution Using Iron-Oxide-Coated Sand Filter Media: Batch Studies

Adsorption of phosphate on iron oxide doped halloysite nanotubes

Efficient Phosphate Adsorption from Groundwater by Mn-FeOOHs

Adsorption Removal of Phosphate from Aqueous Solution Using a New Type of Iron-Oxide-Coated Sand Filter Media

Performance of Magnetic Zirconium-Iron Oxide Nanoparticle in the Removal of Phosphate from Aqueous Solution

Adsorption of Phosphate from Aqueous Solution Using Iron-Zirconium Modified Activated Carbon Nanofiber: Performance and Mechanism.

Theoretical and Experimental Study of the Mechanisms of Phosphate Removal in the System Containing Fe(III)-ions

Phosphate adsorption kinetics and equilibria on natural iron and manganese oxide composites

Adsorption Behavior of Iron Oxide Coated Pumice for Phosphate

Synthesis of hydrated ferric oxide on cation exchange resin for phosphate and hardness removal in water